PLX3
Regulatory Compliance
As of the date of manufacture, the PLX3 has been te sted and found to comply with specifications for CE
marking and standards per EMC and Radiocommunications Compliance Labelling.
Federal Communications Commission (FCC) Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions:
(1) This device may not cause harmful interference and (2) this device must accept any interference
received, including interference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the manufact urer responsible for
compliance could void the use r’s authority to operate the equipment .
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installatio n. This equipment generates, uses and ca n radiate radio
frequency energy and, if not installed and used in accordance with the instruc tions, may cause harmful
interference to radio communications. Howev er, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help
Industry Canada (IC) Compliance Statement
Operation is subject to the following conditions:
1. This device may not cause interference, and
2. This device must accept any interference , i nc luding interference that may cause undesi red operation
of the device.
To satisfy RF exposure requirements, this device and its antenna must operate with a separation distance
of at least 20 centimeters from all persons and must not be colocated or operating in conjunction with any
other antenna or transmitter.
Crestron Electronics, Inc.
15 Volvo Drive, Rockleigh, NJ 07647
Tel: 888.CRESTRON
Fax: 201.767.7576
www.crestron.com
Specifications sub jec t to
change without notice.
DOC. 7133
(2027730)
09.10
Return and Warranty Policies
Merchandise Returns / Repair Service
1. No merchandise may be returned for credit, exchange or service without prior
authorization from CRESTRON. To obtain warranty servic e for CRESTRON products,
contact an authorized CRESTRON dealer. Only authorized CRESTRON dealers may
contact the factory and request an RMA (Return Merchandise Authorization) number.
Enclose a note specifying the nature of the problem , name and phone number of
contact person, RMA number and return address.
2. Products may be returned for credit, exch ange or service with a CRESTRON Return
Merchandise Authorization (RMA) number. Authorized returns must be sh ipped freight
prepaid to CRESTRON, 6 Volvo Drive, Rockleigh, N.J. or its authorized subsidiaries,
with RMA number clearly marked on the outside of all cartons. Shipments arrivi ng
freight collect or without an RMA number shall be subject to refusal. CRESTRON
reserves the right in its sole and absolute discretion to charge a 15% restocking fee
plus shipping costs on any products returned with an RMA.
3. Return freight charges following repair of items under warranty shall be paid by
CRESTRON, shipping by standard ground carrier. In the event repairs are found to be
non-warranty, return freight costs shall be paid by the purchaser.
CRESTRON Limited Warranty
CRESTRON ELECTRONICS, Inc. warrants its products to be free from manufacturing defects
in materials and workmanship under normal use for a period of three (3) years from the date of
purchase from CRESTRON, with the following exce ptions: disk drives and any other moving or
rotating mechanical parts, pan/tilt heads and power supplies are covered for a period of one
(1) year; touchscreen display and overlay components are covered for 90 days; batteries and
incandescent lamps are not covered.
This warranty extends to products purchased directly from CRESTRON or an authorized
CRESTRON dealer. Purchasers should inquire of the dealer regarding the nature and extent
of the dealer's warranty, if any.
CRESTRON shall not be liable to honor the terms of this warranty if the product has been
used in any application other than that for which it was intended or if it has been subjec ted to
misuse, accidental damage, modification or improper instal lation procedures. Furthermore, this
warranty does not cover any product that has had the serial number altered, defaced or
removed.
This warranty shall be the sole and exclusive remedy to the original purchaser. In no ev ent
shall CRESTRON be liable for incidental or consequential damages of any kind (property or
economic damages inclusive) arising from the sale or use of this equ ipment. CRESTRON is
not liable for any claim made by a third party or made by the purchaser for a third party.
CRESTRON shall, at its option, repair or replace any pro duct found defective, without charge
for parts or labor. Repaired or replaced equipment and parts supplied under this warranty shall
be covered only by the unexpired portion of the warranty.
Except as expressly set forth in this warranty, CRESTRON makes no other warranties,
expressed or implied, nor authorizes any other party to offer any warranty, i ncluding any
implied warranties of merchantability or fitness for a particular purpose. Any implied warranties
that may be imposed by law are limited to the terms of this limited warranty. This warranty
statement supersedes all previous warranties.
Trademark Information
All brand names, product names and trademarks are the sole property of their respective owners. Windows is a
registered trademark of Microsoft Corporation. Windows95/98/Me/XP/Vista/7 and WindowsNT/2000 are trademarks of
Microsoft Corporation.
Loading...