CRESNET NETWORK TO MINI NETWORK INTERCONNECT DRAWING DATA SHEET
WIRE NUTS &
BLACK 18 AWG
SHIELD (SEE NOTE BELOW)
JUMPER WIRES
TO
CONTROL SYSTEM
G
Z
Y
24
FRONT VIEW
TWISTED
PAIR A
PARALLEL
PAIR B
1 TO 1 PINOUT REFERENCE
24
Y
Z
G
24
Y
Z
G
RECOMMENDED COLOR CODE
BLACK
24
=
Z
Y
=
=
=
BLUE
WHITE
RED
GND
RED
TO MINI
NETWORK DEVICE
24
Y
Z
G
FRONT VIEW
RED
BLACK
18 AWG
WHITE
22 AWG
BLUE
22 AWG
TO
NETWORK DEVICE
RED
WHITE
BLUE
BLACK
24
Y
Z
G
FRONT VIEW
PAIR A (22 AWG TWISTED) PAIR B (18 AWG PARALLEL)
CAUTION: POSSIBLE EQUIPMENT DAMAGE IF MISWIRED.
DO NOT POWER UP SYSTEM
UNTIL ALL WIRING IS VERIFIED.
CARE SHOULD BE TAKEN
TO ENSURE DATA (Y,Z) AND
POWER (24,G) CONNECTIONS
ARE NOT CROSSED.
GROUND SHIELD AT CONTROL
SYSTEM END ONLY.
MODEL CNHBLOCK &/OR CNTBLOCK NETWORK
DISTRIBUTION/TERMINAL BLOCKS ARE
RECOMMENDED FOR TESTING PURPOSES AND
CONVENIENCE IN WIRING.
JUMPER WIRES: USE #18 AWG.
USE A WIRE NUT THAT WILL
ACCOMMODATE ALL THREE WIRES.
CRESTRON ELECTRONICS, INC. ROCKLEIGH, N.J. 1-888-CRESTRON
Specifications subject to change without notice 04.02 Doc. 5831A
Loading...