
UC-BRKT-100-SD-Z-ASSY
UC Engine Assembly
The Crestron® UC-BRKT-100-SD-Z-ASSY simplifies installation of a Crestron Flex UC conference system, providing all the necessary components
connected and mounted on a single VESA® compliant mounting bracket. The bracket mounts behind a display device in a conference room or
directly to drywall using the included anchors. The UC-BRKT-100-SD-Z-ASSY is intended for use with M-Series and B-Series of Crestron Flex single
display conference systems. For more information, visit www.crestron.com/flex.
Check the Box
Item Qty
Anchor, Drywall, Plastic, 3/8 in. x 1/2 in. (P/N 2052565) 2
Key, Anchor (P/N 4529654) 1
Bit, Spanner, 1/4 in. (P/N 2052847) 1
Screw, 6-32 x 3/8 in., Undercut Head, Spanner (P/N 2052846) 2
Screw, 8-AB x 1-1/2 in., Pan Head, Combo (P/N 2052567) 2
Power Cord (P/N 2053985) 1
Tie Wrap (P/N 2047935) 4
Install the Wall Bracket Assembly
The wall bracket can be mounted to VESA compliant display devices or building structure. Anchors and screws are also supplied for installation on
walls 3/8 in. to 3/4 in. thickness.
NOTES:
• The integrated cable tie wraps are reusable. Take care to avoid damage to the cable tie wraps.
• The wall bracket assembly includes an opening and pass through screw holes for placement over a single gang US electrical wall box that can
be covered by a decorative wall plate. If the wall plate opening will be positioned over an electrical wall box, longer screws will be needed to
secure the decorative wall plate to the electrical box. Do not attempt to secure the wall bracket assembly with the wall plate opening screws.
UC-BRKT-100-SD-Z-ASSY (connecting cables not shown)
14.00 in.
7.00 in.
355.60 mm
177.80 mm
Reusable Cable Tie Wrap (x4)
Connector Cover
HD-CONV-USB-200
1.68 in.
42.78 mm
16.00 in.
406.40 mm
388.62 mm
15.30 in.
UC-ENGINE-SD-Z
Connector Cover
Wall Plate Opening
13.30 in.
337.82 mm
11.11 in.
282.07 mm
15.42 in.
391.67 mm
Power Pack
5.00 in.
127.00 mm

Open the Connector Covers
#1
UC-ENGINE-SD-Z
Connector Cover
For Additional Information
Scan or click the QR codes below for detailed product information.
UC-BRKT-100-SD-ZASSY
Flex Solutions
Connector Cover
#1
Connect Devices
Connect touch screens, conference systems, display devices, network cables, and peripherals to components on the UC-BRK T-100-SD-Z-ASSY. Refer
to the quick start guide included with the Crestron Flex UC System.
CAUTION: The bracket assembly has cables and devices that are connected at the factory. DO NOT DISCONNECT ANY DEVICES OR CABLES THAT
ARE ALREADY CONNECTED.
Secure Connector Covers
Connector Cover
or
NOTE: For additional security, replace the screws with the included spanner screws. A 1/4 in. bit is supplied to install the spanner screws.
Compliance and Legal
Original Instructions: The U. S. Engl ish version of this document is t he original in stru ctio ns. All other l anguages are a transla tion of t he original instructio ns.
The product wa rrant y can be fo und at www.crestron.com/warranty.
The spe cific patent s that cover Crestron p roduc ts are l isted at www.crestron.com/legal/patents.
Certa in Cres tron products contain open source s oft ware. For speci fic informat ion, please v isit www.crestron.com/opensource.
Crestron and th e Crest ron logo are eit her tra demar ks or registered trademarks of Cres tron El ectronics, Inc . in the United Sta tes and/or other countrie s. VES A is eith er a trad emark o r regis tered t radem ark of Vi deo Ele ctro nics Standard s Association in the United States an d/or other countries. O ther trademarks, r egistered tr adema rks, a nd trad e names m ay be us ed in thi s docum ent to refer to
either the ent ities claimin g the marks and n ames or their produc ts. Crestron disclaims any p ropri etar y interest in the marks a nd name s of othe rs. Cre stron is not res ponsi ble for e rrors in typography or photo graphy.
©2019 Crestron Electronics, Inc.
Crestron Electronics, Inc.
15 Volvo Dr ive, Rockleig h, NJ 07647
Tel: 888.CRESTRON
Fax: 201.767.7576
www.crestron.com
Quick Start - Doc. 852 7A
Specifications subject to
change without notice.
(2054416)
10/18/19