Crestron TSW-UMB-60-BBI User Manual

TSW-UMB-60-BBI

Wall Mount Back Box for TSW-UMB-60

The TSW-UMB-60-BBI is a recess wall-mounted metal back box
designed for use with the TSW-UMB-60 Universal Mounting Bracket (sold
separately). Used together, the TSW-UMB-60 and TSW-UMB-60-BBI allow
for the installation of a Crestron® TSW-560, TSW-560P, TSW-760, or

TSW-1060 touch screen in a concrete or masonry wall. Conduit knockouts

are provided on the top, bottom, and sides of the back box.

SPECIFICATIONS

Construction

Metal box

Dimensions

Height: 2.66 in (68 mm)
Width: 4.13 in (105 mm)
Depth: 3.00 in (77 mm)

NOTE: Dimensions shown are overall; consult the installation manual for
actual cutout dimensions, clearances, and complete mounting instructions.

Available Models

TSW-UMB-60-BBI: Wall Mount Back Box for TSW-UMB-60

Notes:

This product may be purchased from an authorized Crestron dealer. To find a dealer, please
contact the Crestron sales representative for your area. A list of sales representatives is available
online at www.crestron.com/salesreps or by calling 800-237-2041.

The specific patents that cover Crestron products are listed online at: patents.crestron.com.

Certain Crestron products contain open source software. For specific information, please visit

www.crestron.com/opensource.

Crestron and the Crestron logo are either trademarks or registered trademarks of Crestron
Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trade­marks, and trade names may be used in this document to refer to either the entities claiming the
marks and names or their products. Crestron disclaims any proprietary interest in the marks and
names of others. Crestron is not responsible for errors in typography or photography.
Specifications are subject to change without notice. ©2017 Crestron Electronics, Inc.

Crestron Electronics, Inc. 15 Volvo Drive | Rockleigh, NJ 07647

Tel: [phone] | Fax: [phone]

www.crestron.com

Specifications subject to change without notice. Revised 05/03/17