Crestron SW-ROOMVW-SVR User Manual

RoomView 7.0

Getting Started Guide

Installation/Configuration
Procedures

These procedures assume that RoomView 7.0 has been
properly installed and configured on your system(s) and
that you will be connecting to a processor running the
demo program when you add a room as described in this
guide. For more information see the RoomView 7.0
Installation Guide (Doc. 6543).

Adding a Room in RoomView

1. Log into RoomView and click the Setup tab at the
top of the main RoomView window.

2. Click on the Tree View tab.

3. Click on the folder, or tree node, where you want to
add the room.

5. Enter information into the fields indicated as required
by the red asterisk.

6. Enter the optional information, such as time zone, e­Control and webcam urls, as desired.

7. Enter the processor details appropriate to your
installation as shown in the following figure.

NOTE: When adding a processor to an existing room via
Add Processor, the form shown above will also have

fields for Name and Location.

8. Select the Symbol version and IPID. Note that the
demo program has a RoomView 6.0 symbol at IPID
03 and a RoomView 7.0 symbol at IPID 05.

4. Place the cursor on the Add menu and select Add

Typical Room when the menu drops down.

NOTE: When adding a new symbol to an existing

processor via Add Symbol, the form shown above will
also have a field for Symbol Name.

Getting Started Guide – DOC. 6544 Remote Asset Management Software : RoomView 7.0 • 1

Remote Asset Management Software RoomView 7.0

9. Click the Add Room button to commit your choices.
Click on the Rooms tab at the top of the window to
see the new room in the Status window.

For More Information

For more information on these and other procedures in
RoomView 7.0, please consult the embedded help by
clicking the help icon (shown below) at the upper right of
the RoomView interface:

Further Inquiries

If you cannot locate specific information or have questions
after reviewing this guide, please take advantage of Crestron's
award winning customer service team by calling the Crestron
corporate headquarters at 1-888-CRESTRON
[1-888-273-7876]. For assistance in your local time zone,
refer to the Crestron website (www.crestron.com) for a listing
of Crestron worldwide offices.

You can also log onto the online help section of the
Crestron website to ask questions about Crestron
products. First-time users will need to establish a user
account to fully benefit from all available features.

Crestron Electronics, Inc. Installation & Configuration – DOC. 6544

15 Volvo Drive Rockleigh, NJ 07647 (2016693)
Tel: 888.CRESTRON 10.06
Fax: [phone] Specifications subject to

www.crestron.com

change without notice.