Crestron ST-CBL User Manual

CRESTRON ST-CBL Programming Cable

DESCRIPTION:

The ST-CBL is CRESTRON's programming cable that enables communication between the Series ST­1500 Touchpanel and the CRESNET II remote control system. The programming cable is six feet in length.
One end of the ST-CBL has a RA, 3.5 mm stereo connector that inserts into right side of the touchpanel
(when viewing the touchscreen). The other end of the ST-CBL has a four-position female connector that
inserts into the control system port labeled NET. Refer to the illustration below for proper connection.

NOTE

The ST-CBL only needs to be connected when loading a program.

SERIES ST-1500

TOUCHPANEL

ST-CBL

Crestron Electronics, Inc.

101 Broadway, PO Box 394
Cresskill, NJ 07626
Tel: 888.CRESTRON / 201.894.0660
Fax: [phone] / BBS: 201.894.1317
http://www.crestron.com

24

NET

Y
Z

G

CNRACK OR

CNRACK-D

OR CNMS

Specifications subject to
change without notice.

Doc. 5680

03.97