www.crestron.com
SmartPresenter™ Carrying Case:
SP-CASE
The SP-CASE has been designed as a carrying case for the SmartPresenter system.
Its lightweight, hard-shell plastic construction offers maximum protection. The pre-cut
foam included with the case has provisions for the SmartPresenter system hardware
and accessories.
Instructions
The illustration below shows the provisions for the SmartPresenter system hardware and miscellaneous
accessories. Place the system components in the designated area. The pre-cut foam securely holds the
components in place.
SP-Case: System Component Locations
POWER
PACK
SP-1
ANTENNA
ACCESSORIES
CNWM / CNWML
NOTE: Before traveling with the SP-CASE, make sure it closes completely and both cover clips are
secured in the closed position.
Crestron Electronics, Inc. Specifications subject
15 Volvo Drive to change without notice.
Rockleigh, NJ 07647
Tel: 888.CRESTRON / 201.767.3400 Doc. 5740
Fax: 201.767.7576 / BBS: 201.767.5506 12.98
Loading...