Crestron HZ-KPCN User Manual

HZ-KPCN

Horizon™ Keypad, Cresnet® Communications

Cresnet® Communications

HZ-KPCN keypads communicate with a Crestron control
system via Cresnet, a 4-wire network bus that provides
bidirectional data communication and 24 VDC power to each
keypad in the system. To simplify wiring in a multigang
arrangement, each HZ-KPCN keypad includes dual parallel
Cresnet ports for daisy-chaining.

Built-In Control Ports

Two digital/analog input ports are included on HZ-KPCN
keypads to provide a local interface for Crestron occupancy
sensors, daylight sensors, and other devices that provide a
contact closure, DC logic, or 0-10 VDC. Using the control ports,
it’s possible to add monitoring of room occupancy, ambient light
level, door closures, and other conditions without additional
wiring.

Field-Replaceable Button Caps

The preinstalled five button caps on the HZ-KPCN are field

HZ-KPCN-W Shown

replaceable, allowing for various engravable button
configurations.

l

Single-gang U.S. wall box installation with faceplate included

l

Gangable up to four across using Crestron® Horizon™ device
compatible multi-gang faceplates (HZ-FP-G series)

l

Configurable with up to five field-replaceable buttons

l

Custom backlit laser-etched engravable buttons

l

Multicolor RGBLED backlighting

l

Auto-dimming day/night backlight modes

l

Fully programmable via a Crestron control system

l

Crestron Home™ OS 3 compatible

l

Dual Cresnet® ports for easy daisy-chaining

l

Two control input ports for external sensors

The HZ-KPCN Horizon™ keypad incorporates control of lighting,
shading, audio, and other amenities throughout a home. Its
design matches the entire line of Horizon dimmers, switches,
and keypads, making it a great addition to new or retrofit
installations.

Multigang Expansion

Up to four devices may be installed side-by-side in a multigang
electrical box with a compatible Horizon faceplate (HZ-FP-G
series). All buttons in a multigang arrangement align to form
one continuous control surface.

Multicolor Backlit Button Engraving

Horizon keypad buttons are laser engravable to identify each
button's function. RGB LED backlights illuminate the engraved
labels and can be adjusted for custom color backlighting. A
built-in ambient light sensor enables auto-dimming of the
backlight brightness according to day and night mode presets.

Each button's backlight provides feedback by changing color,
intensity, or both. The backlight can also flash to show that an
action is being performed.

Customizable Faceplates

Horizon compatible faceplates are customizable for any décor.
Color-matched top and bottom trim pieces may be swapped
easily after installation with custom trim fabricated from solid
materials such as wood, metal, marble, engineered stone, or
Corian®. Contact a Crestron representative, or refer to
Crestron True Blue Support Online Help Answer ID: 1000140,
to obtain specifications and CADs for the fabrication of custom
trim. Paintable trim is also available separately.

NOTE: The faceplate trim is attached magnetically, which

may inhibit use in locations where tampering may occur.

HZ-KPCN

Horizon™ Keypad, Cresnet® Communications

Specifications

Power Requirements

Cresnet
Power Usage

Power
Consumption

2 W (83 mA @ 24 VDC)

2 W maximum

Controls

Pushbutton (5) blank single pushbuttons;

Configurable with combinations of
HZ-BTN-RKR1, HZ-BTN-RKR3, or HZ-BTN-1 in
blank or engraved models;
(5) blank button caps included

NOTE: Supplied button caps are not engravable. For

custom engravings, use HZ-BTN-ENGRAVED button caps.

Setup

(1) Hidden pushbutton;
Located behind faceplate's top trim piece;
Configures the LED backlight and calibrates
the light sensor

Environmental

Temperature 32° to 86° F (0° to 30° C)

Humidity 10% to 90% RH (noncondensing)

Enclosure

Mounting Mounts in a 1-gang U.S. electrical box or

plaster ring (not included);

3.5 in. (26 mm) electrical box depth
recommended;
Gangable up to four units

Faceplate Requires an HZ-FP-G Horizon faceplate

(included)

Dimensions

Height 4.73 in. (120 mm) with faceplate

Width 3.07 in. (78 mm) with 1-gang faceplate

Depth 0.64 in. (17 mm) overall, projects 0.41 in.

(11 mm) from wall surface when installed

LED Indicator and Light Sensor

Feedback (5) Color-adjustable LEDs;

Provides button backlighting

Light Sensor Photosensor with adjustable sensitivity;

Detects the ambient room light level to
activate day or night mode

NOTE: Light sensor performance may be affected by

obstructions placed below the keypad.

Communications

Cresnet Cresnet slave mode

Connections

INPUT
(1 2 G)

NET
(24 Y Z G)

(1) 3-pin 3.5 mm detachable terminal block;
(2) digital/analog input ports, (1) ground;
Digital Input: Rated for 0-24 VDC, input
impedance 200k Ohms, logic threshold

1.24VDC;
Analog Input: Rated for 0-10 VDC, protected
to 24 VDC maximum, input impedance 200k
Ohms;
Programmable 3 V, 2k Ohm pull-up resistor
per input

(2) 4-pin 3.5 mm detachable terminal blocks,
paralleled;
Cresnet slave port with hardwire parallel
pass-through

NOTE: Dimensions shown are without the detachable

connectors.

Weight

4.2 oz (119 g)

Compliance

IC, FCC Part 15 Class B digital device

Models

HZ-KPCN-A

HZ-KPCN-B

HZ-KPCN-W

Available Accessories

HZ-FP-G1-A
Horizon Faceplate, 1-Gang, Almond

HZ-FP-G1-B
Horizon Faceplate, 1-Gang, Black

HZ-FP-G1-W
Horizon Faceplate, 1-Gang, White

HZ-FP-G2-A
Horizon Faceplate, 2-Gang, Almond

HZ-FP-G2-B
Horizon Faceplate, 2-Gang, Black

HZ-KPCN

Horizon™ Keypad, Cresnet® Communications

HZ-FP-G2-W
Horizon Faceplate, 2-Gang, White

HZ-FP-G3-A
Horizon Faceplate, 3-Gang, Almond

HZ-FP-G3-B
Horizon Faceplate, 3-Gang, Black

HZ-FP-G3-W
Horizon Faceplate, 3-Gang, White

HZ-FP-G4-A
Horizon Faceplate, 4-Gang, Almond

HZ-FP-G4-B
Horizon Faceplate, 4-Gang, Black

HZ-FP-G4-W
Horizon Faceplate, 4-Gang, White

HZ-BTN-1-A-T-BLANK
Horizon Backlit Engravable Pushbutton, Size 1, Almond
Textured, Engraving Not Included

HZ-BTN-1-B-T-BLANK
Horizon Backlit Engravable Pushbutton, Size 1, Black Textured,
Engraving Not Included

HZ-BTN-1-W-T-BLANK
Horizon Backlit Engravable Pushbutton, Size 1, White Textured,
Engraving Not Included

HZ-BTN-RKR1-A-T-BLANK
Horizon Backlit Engravable Rocker Button, Size 1, Almond
Textured, Engraving Not Included

HZ-BTN-RKR1-B-T-BLANK
Horizon Backlit Engravable Rocker Button, Size 1, Black
Textured, Engraving Not Included

HZ-BTN-RKR1-W-T-BLANK
Horizon Backlit Engravable Rocker Button, Size 1, White
Textured, Engraving Not Included

HZ-BTN-RKR3-B-T-BLANK
Horizon Backlit Engravable Rocker Button, Size 3, Black
Textured, Engraving Not Included

HZ-BTN-RKR3-W-T-BLANK
Horizon Backlit Engravable Rocker Button, Size 3, White
Textured, Engraving Not Included

HZ-BTN-RKR5-A-T-BLANK
Horizon Backlit Engravable Rocker Button, Size 5, Almond
Textured, Engraving Not Included

HZ-BTN-RKR5-B-T-BLANK
Horizon Backlit Engravable Rocker Button, Size 5, Black
Textured, Engraving Not Included

HZ-BTN-RKR5-W-T-BLANK
Horizon Backlit Engravable Rocker Button, Size 5, White
Textured, Engraving Not Included

CRESNET-NP-TL-SP1000
Cresnet® Control Cable, Non-Plenum, Teal, 1000 ft (304 m)
spool

CRESNET-P-TL-SP1000
Cresnet® Control Cable, Plenum-Rated, Teal, 1000 ft (304 m)
spool

HZA-PWR-15A-A
Duplex Receptacle, 15 A, Almond

HZA-PWR-15A-W
Duplex Receptacle, 15 A, White

HZA-PWR-GFCI-15A-A
Duplex Receptacle, GFCI, 15 A, Almond

HZA-PWR-GFCI-15A-W
Duplex Receptacle, GFCI, 15 A, White

HZA-PWR-USB-15A-A
Duplex Receptacle, Dual Type-A USB Ports, 15 A, Almond

HZA-PWR-USB-15A-W
Duplex Receptacle, Dual Type-A USB Ports, 15 A, White

HZ-TRIM-G1-PAINT-DARK
Horizon™ Paintable Trim, 1-Gang, Dark

HZ-TRIM-G1-PAINT-LIGHT
Horizon™ Paintable Trim, 1-Gang, Light

HZ-TRIM-G2-PAINT-DARK
Horizon™ Paintable Trim, 2-Gang, Dark

HZ-TRIM-G2-PAINT-LIGHT
Horizon™ Paintable Trim, 2-Gang, Light

HZ-TRIM-G3-PAINT-DARK
Horizon™ Paintable Trim, 3-Gang, Dark

HZ-TRIM-G3-PAINT-LIGHT
Horizon™ Paintable Trim, 3-Gang, Light

HZ-TRIM-G4-PAINT-DARK
Horizon™ Paintable Trim, 4-Gang, Dark

HZ-TRIM-G4-PAINT-LIGHT
Horizon™ Paintable Trim, 4-Gang, Light

HZ-KPCN

Horizon™ Keypad, Cresnet® Communications

This product may be purchased from select au thorized Crestron dealers and
distributors . To find a dealer or distributor, please contact the Crestron s ales
representative for your area. A list o f sales representatives is availableonline at

www.crestron.com/How-To-Buy/Find-a-Representative or by calling

855-263-8754.

This product is covered under the Crestron standard limited warranty. Refer to

www.crestron.com/warranty for full details.

The specific patents that cover Crestron pro ducts are listed online at

patents.crestron .com.

Certain Crestron produ cts contain open s ou rce so ftware. For specific
information, please visit www.crestron.com/opens ource.

Crestron, the Crestron logo, Crestron Home, Cresnet, and Horizon are either
trademarks or registered trademarks of Crestron Electronics, In c. in the United
States an d/o r other cou ntries. Corian is either a trademark or registered
trademark of DuPont de Nemours, In c. in the United States and/ or o ther
countries. Other trademarks, registered trademarks, and trade names may be
used in this do cument to refer to either the entities claiming the marks and
names or their pro ducts. Crestron disclaims an y pro prietary interest in the
marks and names of others. Crestron is no t responsible for errors in
typography o r photography.

Specifications are s ubject to change without n otice.

©2020 Crestron Electronics, I nc.

Rev 03/02/20

HZ-KPCN

Horizon™ Keypad, Cresnet® Communications