> HDMI® and HDBaseT® outputs support versatile system
configuration and long wire runs
> Supports input and output resolutions up to 4K/30
(4096x2160@30Hz) or WQXGA (2560x1600@60Hz)
> Supports HDMI, DVI, and Dual-Mode DisplayPort sources
> Includes comprehensive built-in EDID and HDCP
configuration tools
> HDCP 2.2 and 1.4 compliant
> Text and image overlay capabilities
> Passes Dolby® TrueHD, Dolby Atmos®, DTS-HD®, DTS:X®, and
uncompressed 7.1 linear PCM audio
> Supports stereo audio de-embedding via a balanced analog
audio output
> Simplified setup through the front panel OLED display or a
web browser
> High-speed Ethernet LAN connection
> Single-space 19” rack-mountable
> Universal 100-240V internal power supply
The HD-WP-4K-401-C enables the display of up to four video sources
simultaneously on a single HD, Ultra HD, or 4K display. Parallel HDMI®
and HDBaseT® outputs provide flexible connectivity for the display device
and other equipment. Input sources up to 4K are supported via four HDMI
inputs. Fully automatic operation enables use without a control system,
while enhanced operation and custom functionality can be attained
through integration with a control system.
Video windowing enhances the presentation and collaboration capabilities
of any meeting space, allowing multiple presentation sources to be
connected and displayed together on screen. The ability to connect up to
four Crestron Connect It™ cable caddies directly to the HD-WP-4K-401-C
affords a perfect multi-window collaboration solution for huddle rooms
and classrooms. Any meeting room, classroom, training lab, auditorium,
lecture hall, house of worship, or command center can benefit from the
use of video windowing, expanding the facility’s display capabilities while
saving cost by allowing more video sources to be viewed on fewer
display devices.
[5,6,7]
[3,4]
[1,8]
[9]
Note: Interlaced video signals are not supported. A Crestron
HD-SCALER-HD-E video scaler may be added to any HDMI input to
enable support for interlaced video sources on that input. Refer to the
specifications for complete input and output capabilities.
[3]
Note: Full screen 4K display is supported by Inputs 1 and 2 only.
4K sources connected to Inputs 3 and 4 are automatically downscaled
to 1080p.
[1]
High-Performance Video Windowing
The HD-WP-4K-401-C is engineered to deliver a professional onscreen
experience with crystal clear 4K video quality and smooth transitions.
Using Automatic mode, the screen fluidly configures itself based on the
number of connected sources. With four sources connected, all four
images appear in four equal sized windows that combine to fill the screen.
Disconnect or disable one source and the screen reconfigures to display
only three windows (two top, one bottom). Connect or select only two
sources and they display side by side, while a single source displays
full screen.
PIP (Picture-In-Picture) windowing is also supported, allowing one source
to be displayed full screen with a second source displayed in an inset PIP
window. The size and location of the PIP window can be defined at setup.
All windowing modes and input assignments can be managed at setup
or while in operation using the front panel controls, a web browser, or a
control system.
Text & Image Overlay
Each video window can be designated with a custom text label. An
additional text field can be positioned at any location on screen to display
a static label or a dynamic pop-up message sent from the control system.
A custom photo or logo image can also be uploaded to appear at any
location on the screen.
®
& HDMI® Outputs
crestron.com | 800.237.2041
HD-WP-4K-401-C 4K Multi-Window Video Processor
Crestron Connect It
™
Crestron Connect It is a cost-effective, simple-to-use presentation
solution that works seamlessly with the HD-WP-4K-401-C. Simply add
up to four Crestron Connect It Cable Caddies (TT-100 series) to provide
BYOD connectivity and one-touch control for multiple participants around
a conference table. Four USB ports on the HD-WP-4K-401-C provide
power and communications for each cable caddy.
Note: The HD-WP-4K-401-C does not support VGA or analog audio inputs.
HDBaseT® Output
Its HDBaseT output allows the HD-WP-4K-401-C to connect directly to any
display device equipped with an HDBaseT input. The HDBaseT connection
requires just one CAT type cable and supports wiring distances up to
300 feet (100 meters), easily accommodating all types of room configurations.
The HDBaseT and HDMI outputs may be used simultaneously, providing
identical signals at each output with the added benefits of longer cable
length and the ability to power an HDBaseT PoE+ powered device over the
HDBaseT connection.
[2]
The HDBaseT output is also compatible with Crestron DigitalMedia™ (DM®),
allowing for connection to a DM 8G+® receiver, DM switcher, Crestron RL® 2
Group Collaboration System, or DM-DGE-200-C Digital Graphics Engine.
Please note that the HD-WP-4K-401-C does not provide control of the DM
device or any equipment connected to that DM device.
[2]
Audio Pass-Through & De-Embedding
When displaying a full screen image of any single input source, that source’s
audio signal is routed to the HDMI and HDBaseT outputs. A balanced
analog audio output is also included to allow stereo audio signals to be
extracted from the digital output and fed to a separate audio switcher,
processor, or amplifier.
[3,4]
Display Control & System Integration
When used without a control system, the HD-WP-4K-401-C provides
essential on/off power control of the display device, via RS-232 using the
onboard COM port, or via CEC through the HDMI or HDBaseT output. The
display device can be configured to turn on automatically when an input
source is connected, and then turn off following an adjustable time period
after all sources are disconnected.
Adding a control system enables fully customizable control of the display
and other devices connected to the HD-WP-4K-401-C via RS-232, IR, and
CEC. CEC is supported through each of the onboard HDMI and HDBaseT
ports. Integration with a control system also enables integration with
Crestron Fusion® Cloud to support centralized control, monitoring, and
room scheduling as part of a complete managed enterprise.
Simplified Setup
Easy setup and configuration of the HD-WP-4K-401-C is enabled using the
front panel controls or a web browser. Standalone operation is supported
for set-and-forget video windowing applications, and for small AV
presentation applications with or without the optional Crestron Connect It
Cable Caddies.
SPECIFICATIONS
Video
Windowing Modes:
Automatic – Displays only the active inputs (sync detected) as follows:
• Four active inputs display as quad view
• Three active inputs display as three equal sized windows (two
side-by-side at top, one centered at bottom)
• Two active inputs display as side-by-side
• One active input displays full screen
Full Screen – Displays any single input as a full screen image
Picture-in-Picture – Displays any single input full screen with any
other input as a scalable, positionable inset window
Side-by-Side – Displays any two inputs as two equal sized, vertically
centered windows
Quad View – Displays all four inputs as four equal sized windows
(two side-by-side at top, two side-by-side at bottom)
Input Signal Types: HDMI® w/4K
compatible
[9]
)
Output Signal Types: HDMI w/4K (DVI compatible
(DM 8G+® compatible
[7]
)
Maximum Input Resolutions:
Scan
Type
Resolution
4096x2160 DCI 4K
Progressive
3840x2160 4K UHD
2560x1600 WQXGA
1920x1080 HD1080p60 Hz4:4:436 bit
Maximum Output Resolutions:
Scan
Type
Resolution
4096x2160 DCI 4K
Progressive
3840x2160 4K UHD
2560x1600 WQXGA60 Hz4:4:424 bit
1920x1080 HD1080p60 Hz4:4:424 bit
NOTE: Common resolutions are shown. Other custom resolutions
(within the maximum limits listed) are supported at pixel clock rates up
to 300 MHz. Interlaced signals are not supported.
Audio
Input Signal Types: HDMI (Dual-Mode DisplayPort compatible
Output Signal Types: HDMI, balanced analog stereo
Digital Formats: Dolby Digital®, Dolby Digital EX, Dolby Digital Plus,
Dolby TrueHD, Dolby Atmos, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res,
DTS-HD Master Audio, DTS:X, LPCM up to 8 channels
Analog Formats: Stereo 2-Channel
Digital-To-Analog Conversion: 24-bit 48 kHz
[1]
(DVI & Dual-Mode DisplayPort
[9]
), HDBaseT® w/4K
Frame
Rate
&
30 Hz4:4:424 bit
[1]
[1]
60 Hz4:4:424 bit
Frame
Rate
&
30 Hz4:4:424 bit
[4]
Color
Sampling
Color
Sampling
[8]
[3,4]
Depth
Depth
[9]
)
Color
[10]
Color
crestron.com | 800.237.2041
HD-WP-4K-401-C 4K Multi-Window Video Processor
Rear View
Analog Performance: Frequency Response: 20 Hz to 20 kHz ±0.5 dB;
S/N Ratio: >95 dB 20 Hz to 20 kHz A-weighted;
THD+N: <0.005% @ 1 kHz;
Stereo Separation: >90 dB
Analog Volume Adjustment: -80 to +20 dB
Analog Delay Adjustment: 0 to 150 ms
Communications
Ethernet: 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery,
full/half duplex, DHCP, web browser setup and control, Crestron control
system integration
USB: “INPUT 1 – 4” host ports enable basic control of the unit using
Crestron Connect It devices; service port enables firmware update via USB
mass storage device
RS-232: 2-way device control and monitoring up to 115.2k baud with
hardware and software handshaking
[5]
IR/Serial: 1-way device control via infrared up to 1.1 MHz or serial
TTL/RS-232 (0-5 Volts) up to 60k baud
Note: The HDBT output is for connection to HDBaseT or DM equipment
only; do not connect to an Ethernet network
IR: (1) 2-pin 3.5 mm detachable terminal block;
IR/Serial output port
[5]
;
IR output up to 1.1 MHz;
1-way serial TTL/RS-232 (0-5 Volts) up to 60k baud
COM: (1) 5-pin 3.5 mm detachable terminal block;
Bidirectional RS-232 port
[5]
;
Up to 115.2k baud, hardware and software handshaking support
LAN: (1) 8-pin RJ45 female;
10Base-T/100Base-TX Ethernet port
SERVICE: (1) USB Type A female;
Supports USB mass storage devices for firmware update
100-240V~2.0A 50/60Hz: (1) IEC 60320 C14 main power inlet;
Mates with removable power cord, included
Controls & Indicators
PWR: (1) Bi-color green/amber LED, indicates operating power supplied
from AC line power, turns amber while booting and green when operating
ONLINE: (1) Amber LED, indicates online connection to a control system
via Ethernet
Display: 2x20 character alphanumeric OLED; displays setup and
configuration menus, signal information, customizable input/output names
MENU: (1) Pushbutton, opens the setup menu
pqtu: (4) Pushbuttons, for menu navigation and parameter adjustment
Enter: (1) Pushbutton, applies a change
BACK: (1) Pushbutton, steps menu back one level
EXIT: (1) Pushbutton, exits the menu
HDBT OUTPUT (rear): (2) LEDs, green LED indicates HDBaseT link status,
amber LED indicates video and HDCP signal presence
LAN (rear): (2) LEDs, amber LED indicates Ethernet activity, green LED
indicates Ethernet link status
100-240V~2.0A 50/60Hz (rear): (1) Rocker switch, turns main port to unit
on or off
Power
Main Power: 2 Amps @ 100-240 Volts AC, 50/60 Hz
Power Consumption: 40 Watts typical, 20 Watts idle
Power over HDBaseT: IEEE 802.3at PoE+ compliant PSE (Power Sourcing
Equipment), supplies up to 25.5 Watts (Class 0-4) to power one HDBaseT
PoE or PoE+ PD (Powered Device)
Temperature: 32° to 104° F (0° to 40° C)
Humidity: 10% to 90% RH (non-condensing)
Heat Dissipation: 137 BTU/hr typical, 68 BTU/hr idle
HD-WP-4K-401-C 4K Multi-Window Video Processor
Enclosure
Chassis: Metal, black finish, vented sides
Front Panel: Metal, black finish with polycarbonate label overlay
Mounting: Freestanding or 1 RU 19-inch rack-mountable (adhesive feet
and rack ears included)
Dimensions
Height: 1.75 in (45 mm)
Width: 18.97 in (482 mm), 17.29 in (439 mm) without rack ears
Depth: 11.19 in (285 mm)
Weight
6.2 lb (2.9 kg)
HDBaseT & DM 8G+ Maximum Cable Lengths
Cable Type:
Resolution:
DM-CBL-ULTRA
DM® Ultra
Cable
DM-CBL-8G
DM 8G®
Cable
CAT5e
(or better)
[2]
1080p60 Full HD
1920x1200 WUXGA
1600x1200 UXGA
2048x1080 DCI 2K
2560x1440 WQHD
2560x1600 WQXGA
3840x2160 4K UHD
330 ft
(100 m)
330 ft
(100 m)
230 ft
(70 m)
330 ft
(100 m)
165 ft
(50 m)
4096x2160 DCI 4K
Notes:
1. Inputs 1 and 2 allow sources with resolutions up to DCI 4K to be displayed at their full
resolution when in full screen mode (as long as that resolution is supported by the display
device). Inputs 3 and 4 will accept sources with resolution up to DCI 4K, however the full
screen output resolution for these inputs is limited to 1080p. Sources with resolutions
beyond 1080p that are connected to Inputs 3 and 4 are always downscaled to 1080p. Refer
to the specifications for additional details on supported input and output resolutions.
2. The maximum cable length for HDBaseT or DigitalMedia 8G+ (DM 8G+) is dependent upon
the type of cable, resolution of the video signal, and capabilities of each connected device.
Refer to the “HDBaseT & DM 8G+ Maximum Cable Lengths” table for a detailed overview.
Shielded cable and connectors are recommended to safeguard against unpredictable
environmental electrical noise which may impact performance at resolutions above 1080p.
Refer to the Crestron DigitalMedia Design Guide, Doc. #4546 for DM system design
guidelines. All wire and cables are sold separately.
3. Audio is only passed to the outputs when displaying a full screen video image, and only the
audio associated with the full screen image is passed. Audio is not passed to any output
when displaying video in windows.
4. The analog audio output is only active when the input source is outputting a 2-channel
stereo signal.
5. When used without a control system, the RS-232 COM port supports basic on/off power
control of a single display device and the IR port is not utilized. The addition of a Crestron
control system with custom programming enables both the COM and IR ports to be utilized
for fully-customizable control applications.
6. When used without a control system, CEC may be utilized at either video output to provide
basic on/off power control of a single display device. The addition of a Crestron control
system with custom programming enables CEC to be utilized through any HDMI or HDBaseT
port for fully-customizable control applications.
7. The HD-WP-4K-401-C does not provide direct control of a DM receiver or any devices
connected to that receiver. To enable this requires a Crestron control system with custom
programming.
8. The HD-WP-4K-401-C does not support interlaced input or output signals. An
HD-SCALER-HD-E may be added to any HDMI input to enable support for interlaced video
sources on that input. Please refer to the HD-SCALER-HD-E spec sheet for more information.
9. HDMI connections require an appropriate adapter or interface cable to accommodate a DVI
or Dual-Mode DisplayPort signal. CBL-HD-DVI interface cables are available separately.
10. Deep Color input signals are truncated to 24-bit (8-bits per color) at the output.
This product may be purchased from an authorized Crestron dealer. To find a dealer, please
contact the Crestron sales representative for your area. A list of sales representatives is available
online at www.crestron.com/salesreps or by calling 800-237-2041.
MODELS & ACCESSORIES
Available Models
HD-WP-4K-401-C: 4K Multi-Window Video Processor with HDBaseT® &
HDMI® Outputs
Available Accessories
TT-100 Series: Crestron Connect It™ Cable Caddy
AM-101: AirMedia® Presentation Gateway
MP-AMP30: Media Presentation Audio Amplifier
MP-AMP40: Media Presentation Audio Amplifier, 70 or 100 Volt
AMP-Series: Commercial Amplifiers
SAROS SB-200-P: Saros® Sound Bar 200, Powered
CBL Series: Crestron® Certified Interface Cables
MP-WP Series: Media Presentation Wall Plates
MPI-WP Series: Media Presentation Wall Plates - International Version
CNSP-XX: Custom Serial Interface Cable
IRP2: IR Emitter Probe w/Terminal Block Connector
The specific patents that cover Crestron products are listed online at: patents.crestron.com.
Certain Crestron products contain open source software. For specific information, please visit