effort.Mountingthe FlipTopisassimpleascuttingthe hole,
placingtheunit, andturningfourscrewstoengage the
swivelingdogsthatsecure the FlipTopinplace. Then installthe
dropin modulesandaddanyundertable accessories. To
complete the installation,the topcoverbezelsnaps intoplace
magnetically.
See also the FT2-1400-MECHseries FlipTopsystemsfora
lowercostalternative withreducedfeatures andoptions.
Optionalaccessories include pass-throughcables, gravity
cable retractors,one-touchcable retractors, active
connectorplates, USB rapidchargers, flush-mountkeystone
connectorplates, internationalAC power outlets,anda
utilityshelf
3
TheCrestron® FT2-1400-ELECFlipTop™ cablemanagement
systeminstallsintoatableorotherhorizontalsurface to
provide modularconnectivity.The FT2-1400-ELECseries
feature a one-touchlidthatretractsfullyanddisappearswith
thetapofabutton.When the lid is retracted,18 moduleslots
arearrangedintworows of nine. The flexiblemodulardesign
mayalsobecustomizedwith anassortmentofCrestron
accessories.For more informationaboutthe accessories,
pleasevisitwww.crestron.com/Crestron-FlipTops. To configure
yourFlipTop,launch the FlipTopConfigurationTool.
All connectionsreside atthe topsurface,clearlyvisible and
readilyaccessible. A selectionofmodularcomponents enables
customconfigurationandquickinstallation. Backlitsymbolicons
clearlyidentifytheconnectiontype under anylighting
condition.1Precisionfitandfinishaffords functionalityanda
cleanappearance withmachinedmetalsurfacesfinishedin a
choiceofblackoralloy.
TheFT2-1400-ELECSeries features a builtinelectricalpower
bus,whichenables compatibilitywith one-touchcable
solution witheasy-to-install accessories such as pulloutcables,
flushmountconnectors, andACpoweroutlets. The final
installation provides one smooth,contiguoussurface withno
visiblegapsor screws, andthemodules mayberearrangedat
anytime.
l Pass-ThroughCables andCable Pass -ThroughPlates: The
pass-through cablesandplates work together to offer a
simplecable managementsolution.Each pass-through
cable installsintheFlipTopassemblyusinga cablepassthroughplate module, which allowsthecable to be pulled
outsmoothlyfor use andthendroppedbackintothe
FlipTop.For details,refer to the FT2A-CBL-PTand
FT2A-PLT-PT-10 productpages.
l One-TouchCableRetractors:At the touchofa button,
WhentheFT2-1400-ELECisconnected toa
Crestroncontrolsystemor DMPS, customprogramming
provides additional functionality, such as triggering
retractionbased on occupancyor scheduling.For details,
refer to the FT2A-CBLR-1Tproductpage.
l GravityCable Retractors:Gravitycable retractors employa
installation of anyflushmountablekeystone compliant
connector.For details,refer to the FT2A-PLT-KEY-10.
l USBRapidChargers:Provideaconvenientsolutionfor
3
quicklychargingmobile devices atthetable.The
FT2A-CHGR-USBA-BASICincludes twoUSB-A charging
ports. The FT2A-CHGR-USBA/C, usedwithonlyFT2 ELEC
series systems,includes bothUSB-C™ andUSB-Acharging
ports andabacklitsymbolicon. For details,refer to
FT2A-CHGR-USBA-BASICandFT2A-CHGR-USBA/C.
1
WhentwoUSB chargingmodules areused,thesecond
requires the purchase andinstallation of anadditional
power supply(model FT2A-UTK-PWS) beneaththe table.
A maximumofone USBchargingmodule is permittedper
4
row.
l AC Power Outlet Modules:AC poweroutletsareofferedin
NEMAtype modulesavailable for the U.S., Canada,and
Mexico,withone, two, or three outlets per module.
Internationaloutlets are available withoneortwooutlets
permodule. For details refer tothe followingmodules:
l BlankPlates:Fill unusedmodule slots withablankplate
1
module. For details,refer to FT2A-PLT-BLANK-10.
l UtilityShelf:A utilityshelf accessory(FT2A-UTK-SHELF)is
available to ease theinstallationofaCrestron
DigitalMedia®transmitter or other interface device
beneath thetable. The shelf attaches to anysideofthe
FlipTopchassisbelowthetable.Twoshelves maybe
installed onopposingsidesofthechassis.
Specifications
ModuleSlots
Maximum18
Rows2 rows (9 modules per row)
Connectors (onchassis)
DC Power
NET
Ground
Controls
LidOpen
Power
PowerSupply
(included)
Operating
Power
(2) 2.1 x 5.5 mmDCpower connectors;
24 VDC power inputs
(one per eachrowofmodules)
NOTE: A single FT2A-UTK-PWS power
supplyandY-adaptercable are included to
power bothinputs.A secondpower supply
maybe purchased topowereachinput
separatelyifrequired.
FT2A-UTK-SHELF
Under-TableUtility Shelf for FT2 Series
Notes:
1. Backlitsymbol icons areprovidedonthecableretractors,connector
plates,andUSB chargingmodulesonly.Cablepass-through plates,
keystone plates,andAC power outletsdo notincludebacklitsymbolicons.
The symbolicon on an FT2A-CBLR-GRgravitycableretractoris not
backlit,but remains clearlylegible,wheninstalled inan FT2-1400-ELEC
seriesFlipTop.FT2A-CBLR-1TseriesOne-Touch cableretractors arenot
compatiblewith an FT2-1400-MECHseries FlipTop.
2. Cableretractorsarenormally installedatthe leftand/orrightend ofeither
row.Toenableinstallationofretractorsin themiddlepositions requires
theadditionalpurchase and installationofmid-row adapter brackets (one
perrow,FT2A-CBLR-BRKT-1400). Amid-rowretractor occupies thethird
and fourthmoduleslots of therow.
3. Only flush mountkeystoneconnectors may beused.Connectors that
stand outfrom themounting platesurfacearenot compatible.
4. AsingleUSB rapidcharging moduleissupportedusingthe included power
supply.Asecond power supply,modelFT2A-UTK-PWS,mustbepurchased
and installedto supporta second USBcharging module.A maximum of
one USBcharging moduleispermittedper row.