DMPS3-4K-100-C
3-Series® 4K DigitalMedia™ Presentation System 100
The DMPS3-4K-100-C from Crestron® provides
an ultra high-definition presentation switcher and
control solution that’s perfect for huddle rooms,
conference rooms, and classrooms. It integrates
the control system, multi-format switcher, 4K video
scaler, mic preamp, and audio DSP all into one
compact device that mounts conveniently under a
conference table or in an equipment rack. Built-in
Crestron Connect It™ functionality affords a
complete collaboration solution that’s easy and
affordable to deploy in any small to medium sized
meeting space. Without requiring any programming,
the DMPS3-4K-100-C is easily configurable for a
variety of media presentation applications.
> Ultra high-definition, multi-format presentation switcher, scaler,
mic preamp, audio DSP, and control system
> Out of the box Crestron Connect It™ collaboration
system functionality
> Supports up to four TT-100 series Crestron Connect It
Cable Caddies
> Built-in .AV Framework™ delivers a fully-functional system without
any programming
> Integrated 3-Series Control System® allows fully-programmable
room control
> Includes four auto-switching HDMI®, VGA, and stereo analog
audio inputs
> Also supports Dual-Mode DisplayPort, DVI, and analog
video sources
> Input auto-detection configures each input automatically
> QuickSwitch HD™ technology manages HDCP keys for fast,
reliable switching
> Auto-Locking® technology achieves rapid switching between
disparate sources
> Performs automatic AV signal format management via EDID
> Provides adjustable input level compensation on each audio input
> Includes a single microphone input with EQ, gating, and
compression
> Provides parallel HDMI and DM 8G+® outputs for one or more
display devices
> DigitalMedia 8G+® connectivity enables long-distance wiring over
CAT type twisted pair cable
> Integrates seamlessly with DigitalMedia™ matrix switchers to
allow facility-wide signal distribution
> HDBaseT® Certified — Enables direct connection to an HDBaseT
certified display device
> Features a built-in, high-performance 4K scaler
> Upscales input signals to match the native resolution of any
screen — including 4K and Ultra HD displays!
[1]
[3]
[6]
[4,5]
[9]
> Downscales 4K, UHD, and ultra high-resolution computer signals
to fit 1080p and other lower-resolution displays
> Handles any input resolution from standard NTSC 480i or
PAL 576i, to UHD and 4K
> Provides intelligent frame rate conversion, content-adaptive
noise reduction, and motion-adaptive de-interlacing
> Provides 3D to 2D signal conversion, and passes 3D video
(without scaling) to 3D displays
> Provides a balanced stereo audio output with graphic EQ,
limiting, and delay
> Enables analog-to-HDMI audio embedding and de-embedding
> Handles Dolby® TrueHD, Dolby Atmos®, DTS-HD®, and
uncompressed 7.1 linear PCM audio
> Includes onboard IR, RS-232, and Cresnet® control ports
> Supports Crestron® touch screens, keypads, and wireless remotes
> Supports XPanel with Smart Graphics™ computer and web
based control
> Supports iPhone®, iPad®, and Android™ control apps
> Supports universal remotes via built-in RC-5 compatible IR receiver
> Communicates natively with Crestron Fusion® Cloud
> Enables IT-friendly network integration via SNMP
> Integrated Ethernet switch provides a single-point LAN connection
> Private Network Mode — requires just one IP address for the
complete system
> Includes front panel controls for switching and volume adjustment
> Includes customizable front panel label strips
> Allows complete AV setup and adjustment via a web browser
> Features an internal universal power supply for
worldwide compatibility
> Furnishes Power over DM® or HDBaseT for
PoDM/PoH-powered devices
> Mounts under the table or in a single 19” rack space
[7]
[6]
[8]
crestron.com | 800.237.2041
DMPS3-4K-100-C 3-Series
DMPS3-4K-100-C — Rear View
®
4K DigitalMedia™ Presentation System 100
Auto-switching HDMI®, VGA, and analog audio inputs provide the essential
connectivity needed to manage multiple computers and other media
sources. A full-featured microphone input is also included for applications
requiring high-quality speech reinforcement. The selected input source and
microphone can be mixed and routed to one HDMI output and one stereo
analog audio output. Additionally, its DigitalMedia 8G+® output affords a
streamlined, long-distance wiring solution for the display device, and for
facility-wide integration as part of a larger media distribution system.
Built-in 4K scaling ensures the highest possible image quality, and
compatibility with the widest range of sources and displays.
4K Ultra HD
The DMPS3-4K-100-C handles 4K and Ultra HD video signals, which is
essential to ensure support for the latest generation of computers and
monitors with native resolutions beyond 1080p and WUXGA.
Crestron Connect It
™
Crestron Connect It is a cost-effective, simple-to-use presentation solution
that provides tabletop BYOD connectivity and one-touch control for multiple
participants around a conference table. Simply add up to four Crestron
Connect It Cable Caddies (TT-100 series
[1]
) to the DMPS3-4K-100-C. Its
auto-switching inputs support individual HDMI, VGA, and analog audio
connections at each cable caddy. Four USB ports on the DMPS3-4K-100-C
provide power and communications for each cable caddy.
A fully functional Crestron Connect It system is enabled right out of the
box by simply connecting the cable caddies and input cables. Additional
settings and AV adjustments are available through a simple web browser
setup screen. In addition to the Crestron Connect It devices, the
DMPS3-4K-100-C can also accommodate a single DM receiver and an
AirMedia® Presentation Gateway without any additional programming.
[1,2]
No Programming Required!
Installing the DMPS3-4K-100-C is easy, fast, and affordable. Built-in
.AV Framework™ technology delivers a fully-functional presentation
system with simplified configuration and a choice of control options and
other add-ons. For complete details on the capabilities supported by
.AV Framework, please visit: www.crestron.com/avframework.
[3]
Multi-Format Auto-Switcher
The DMPS3-4K-100-C provides high-performance automatic switching
between four groups of inputs, each including HDMI, VGA, and unbalanced
stereo audio. The HDMI inputs are compatible with DVI and Dual-Mode
DisplayPort sources
S-Video, and component video sources
[4]
, and the VGA inputs can handled RGB, composite,
[5]
. Digital audio is supported by the
HDMI inputs, plus each analog audio input may be used in combination
with its corresponding VGA or HDMI video input.
[6]
Input auto-detection
eliminates the need to configure the inputs — simply connect your source
and the DMPS3-4K-100-C selects the right audio and video combination.
The switched video signal is routed to one HDMI output and one DM 8G+®
output simultaneously. The DM 8G+ output is compatible with HDBaseT®.
4K Scaler
With its high-performance 4K video scaler on board, the DMPS3-4K-100-C
ensures an optimal image from every video source on practically any
display device. It allows SD, HD, and all types of computer sources to
look their best on Ultra HD and 4K displays, and it allows sources with
resolutions above HD 1080p to be viewed reliably on 1080p and lower
resolution displays. It accepts any input resolution, from standard definition
NTSC 480i to ultra high-definition 4K DCI, and scales it perfectly to match
the native resolution of any screen up to 4K DCI (4096 x 2160). Interlaced
sources are converted to progressive scan using motion-adaptive
deinterlacing. Intelligent frame rate conversion enables support for 24p
and PAL format sources. And, 3D to 2D conversion allows 3D content to be
viewed on 2D-only displays.
[7]
The output of the scaler feeds both the HDMI
and DM 8G+ outputs.
Flexible Audio Outputs
The switched audio signal is routed to the HDMI output as well as to a
separate balanced analog audio output, with individual level adjustments
provided for each output. The HDMI output signal is also fed simultaneously
to the DM 8G+ output. All inputs and outputs support stereo audio, with
the option to configure the analog output for mono. Dolby® TrueHD,
Dolby Atmos®, DTS-HD®, and 7.1 linear PCM audio signals can also be
routed through the HDMI inputs and output, as well as the
DM 8G+ output.
[8]
Professional Audio DSP
The analog audio output includes professional digital signal processing,
allowing the signal to be adjusted for optimum performance and sound
quality. The analog output is ideally designed to be connected to an
external power amplifier and used to drive a set of ceiling or wall mount
speakers. In addition to volume, bass, treble, and mute controls, the DSP
provides 10-band graphic equalization, fully-adjustable limiting, and up to
80 ms of delay. All settings are adjustable using the DMPS3-4K-100-C’s
web browser user interface for easy setup. The output volume level is also
adjustable using the front panel volume knob.
Microphone Input with DSP
A full-featured microphone preamp is included to support the connection of
a single wired or wireless mic. Advanced features include fully-adjustable
gating and compression, 4-band semi-parametric EQ, and switchable 48V
phantom power. The microphone signal can be routed to the analog output,
the digital output (HDMI and DM 8G+), or both, with separate level
adjustments provided for each.
crestron.com | 800.237.2041
DMPS3-4K-100-C 3-Series
®
4K DigitalMedia™ Presentation System 100
DigitalMedia 8G+
Its DM 8G+ output endows the DMPS3-4K-100-C with great potential for
connecting to a display device and integrating with larger systems. DM 8G+
provides a true one-wire interface for transporting ultra high-definition
video, audio, control, power, and networking signals over CAT type cable
at distances up to 330 feet (100 meters).
to the DM 8G+ output provides a streamlined AV and control interface for
a single projector or flat panel display located anywhere in the room.
DM 8G+ can also provide the interface to a centralized DigitalMedia™
matrix switcher, allowing the DMPS3-4K-100-C’s output signal to be
distributed to other rooms and buildings.
HDBaseT® Certified
Crestron DM 8G+ technology is designed using HDBaseT Alliance
specifications, ensuring interoperability with other HDBaseT certified
products. Via DM 8G+, the DMPS3-4K-100-C can be connected directly
to an HDBaseT compliant display device without requiring a
DM 8G+ receiver.
EDID Format Management
The DMPS3-4K-100-C provides comprehensive management of the EDID
(Extended Display Identification Data) information that passes between
display devices and input sources, ensuring that each source gets
displayed at its optimal resolution and format. Most applications require
no changes to the default settings. For applications requiring custom
configuration, the DMPS3-4K-100-C allows for easy assessment of each
device’s format and resolution capabilities, with the ability to configure
signals appropriately for the most desirable and predictable behavior.
QuickSwitch HD™ Technology
Handling digital media signals means handling HDCP (High-bandwidth
Digital Content Protection), the encryption scheme used by content
providers to protect their DVDs, Blu-ray™ discs, and broadcast signals
against unauthorized copying. Viewing HDCP encrypted content requires a
source device to “authenticate” each display and signal processor in the
system and issue it a “key” before delivering an output signal. Crestron
QuickSwitch HD manages these keys to ensure fast, reliable switching and
immunity to “blackouts,” whether using a single display, or distributing to
multiple displays through a larger DigitalMedia system.
Auto-Locking® Technology
Crestron Auto-Locking Technology enables super fast signal switching
by instantaneously configuring every device in the signal path, including
DM receivers and scalers, as soon as the signal hits the first device.
Whether switching between sources or TV channels, Auto-Locking
significantly reduces the time it takes each device to sense the new signal
and configure itself to handle the changes, virtually eliminating any
noticeable gap while switching.
Integrated 3-Series Control System
Its built-in 3-Series control system enables the DMPS3-4K-100-C to
provide complete, customizable control of every AV device, as well as
room lighting, window shades, and projection screens, without requiring
a separate control processor. Onboard control ports include one IR port
and one RS-232 COM port, as well as Cresnet® and Ethernet. The
DMPS3-4K-100-C supports the full line of Crestron touch screens,
®
[9]
Connecting a DM 8G+ receiver
®
keypads, and wireless remotes for a user experience custom tailored to the
specific requirements of each end-user. Support for Crestron control apps
and Crestron Fusion® Cloud delivers the industry’s most powerful platform
for remotely controlling and managing multiple rooms using computers
and mobile devices.
CEC Embedded Device Control
For controlling third-party AV devices, the DMPS3-4K-100-C provides
an alternative to conventional IR, RS-232, and Ethernet by harnessing the
CEC (Consumer Electronics Control) signal embedded in HDMI. Using CEC,
many devices can be controlled right through their HDMI or HDBaseT
connections, eliminating the need for any dedicated serial cables or
IR emitters.
Built-in Ethernet Switch
In addition to transporting digital video and audio, the DM 8G+ output port
can also extend Ethernet out to the display device, providing a high-speed
LAN connection for the display via the DM receiver. Ethernet is also utilized
internally by the Crestron control bus to manage the receiver and provide
device control.
Private Network Mode
To streamline its implementation on a corporate or university LAN, the
DMPS3-4K-100-C employs Private Network Mode to provide a single-point
connection for the complete system. Using Private Network Mode, the
DMPS3-4K-100-C requires just one IP address.
SPECIFICATIONS
Operating System
Crestron® 3-Series®; real-time, preemptive, multi-threaded/multitasking
kernel; Transaction-Safe Extended FAT file system; supports up to 10
simultaneously running programs; preloaded DMPS3 .AV Framework™
Base Program; out-of-the-box “Crestron Connect It™” functionality
Control System Memory
SDRAM: 1 GB
Flash: 4 GB
Communications
Ethernet: 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery,
full/half duplex, industry-standard TCP/IP stack, UDP/IP, CIP, DHCP, SSL,
TLS, SSH, SFTP (SSH File Transfer Protocol), FIPS 140-2 compliant
encryption, IEEE 802.1X, SNMP, BACnet™/IP
Directory authentication, IIS v.6.0 web server, SMTP e-mail client, RSTP,
Private Network Mode
Cresnet®: Cresnet master mode
USB: USB host ports for Crestron Connect It devices and firmware update
via USB flash drive; USB device port for computer console (setup)
RS-232: 2-way device control and monitoring up to 115.2k baud with
hardware and software handshaking
IR/Serial: 1-way device control via infrared up to 1.2 MHz or serial TTL/
RS-232 (0-5 Volts) up to 115.2k baud; built-in RC-5 compatible IR receiver
[10]
, IPv4 or IPv6, Active
crestron.com | 800.237.2041
DMPS3-4K-100-C 3-Series
®
4K DigitalMedia™ Presentation System 100
DigitalMedia™: DM 8G+®, HDCP, EDID, CEC, PoDM, Ethernet
HDBaseT®: HDCP, EDID, CEC, RS-232, PoH, Ethernet
HDMI®: HDCP, EDID, CEC
NOTE: Supports management of HDCP and EDID; supports management
of CEC between the connected HDMI and HDBaseT devices and the
control system
Video
Switcher: 8x1 (organized as multi-format 4x1), auto-switching, autodetecting multi-format digital/analog source inputs, QuickSwitch HD™
technology
Scaler: 4K video scaler, motion-adaptive deinterlacer, intelligent frame
rate conversion, Deep Color support, 3D to 2D conversion
[7]
, contentadaptive noise reduction, widescreen format selection (zoom, stretch,
maintain aspect-ratio, or 1:1)
Input Signal Types: HDMI w/Deep Color, 3D, & 4K (DVI & Dual-Mode
DisplayPort compatible
(YPbPr); S-Video (Y/C); composite (NTSC, PAL)
Output Signal Types: HDMI w/Deep Color, 3D, & 4K (DVI compatible
[4]
); RGB/VGA (RGBHV, RGBS, RGsB); component
[5]
[4]
);
DM 8G+ & HDBaseT w/Deep Color, 3D, & 4K
Analog-To-Digital Conversion: 10-bit 165 MHz per each of 3 channels
Maximum Pass-Through Resolutions:
Input Type Scan Type Resolution
4096x2160 4K DCI
or
HDMI
RGB/VGA Progressive
Component
[5]
Composite
or S-Video
Progressive
Interlaced 1920x1080 HD1080i 30 Hz 4:4:4 36 bit
Progressive 1920x1080 HD1080p 60 Hz n/a
Interlaced 1920x1080 HD1080i 30 Hz n/a
Interlaced
[5]
3840x2160 Ultra HD
2560x1600 WQXGA 60 Hz 4:4:4 36 bit
1920x1080 HD1080p 60 Hz 4:4:4 36 bit
1600x1200 UXGA 60 Hz n/a
1920x1200 WUXGA 60 Hz n/a
480i NTSC
or 576i PAL
Frame
Rate
24 Hz 4:4:4 30 bit
30 Hz 4:4:4 24 bit
30 Hz 4:2:2 36 bit
60 Hz 4:2:0 24 bit
60 Hz n/a
Color
Sampling
Color
Depth
Input Type Scan Type Resolution
Component
[5]
Composite
or S-Video
Progressive 1920x1080 HD1080p 60 Hz n/a
Interlaced 1920x1080 HD1080i 30 Hz n/a
[5]
Interlaced
480i NTSC
or 576i PAL
Frame
Rate
60 Hz n/a
Color
Sampling
Color
Depth
Maximum Scaler Output Resolutions:
Output Type Scan Type Resolution
4096x2160 4K DCI
HDMI, DM,
or HDBaseT Progressive
3840x2160 Ultra HD
1920x1080 HD1080p 60 Hz 4:4:4 36 bit
or
2560x1600 WQXGA 60 Hz 4:4:4 36 bit
Frame
Rate
24 Hz 4:4:4 30 bit
30 Hz 4:4:4 24 bit
30 Hz 4:2:2 36 bit
Color
Sampling
Color
Depth
NOTE: Common resolutions are shown; other custom resolutions are
supported at pixel clock rates up to 300 MHz for digital inputs and outputs,
or 165 MHz for analog inputs
Audio – General
Switcher/Mixer: 8x1 (organized as multi-format 4x1) stereo source
switcher, auto-detecting digital/analog source inputs, single-channel
gated mic preamp w/DSP, two independent mic/source mixers (one for
analog output, one for digital outputs), stereo DSP for analog output,
4x1 multichannel source switcher, digital audio mixer bypass mode for
multichannel pass-through to digital outputs
Analog-To-Digital Conversion: 24-bit 48 kHz
Digital-To-Analog Conversion: 24-bit 48 kHz
Frequency Response: 20 Hz to 20 kHz ±0.5 dB (digital source);
20 Hz to 20 kHz ±0.5 dB (analog line source);
20 Hz to 20 kHz ±0.7 dB (microphone source)
S/N Ratio: >108 dB, 1 kHz, A-weighted (digital source);
>103 dB, 1 kHz, A-weighted (analog line source)
THD+N: <0.002%, 20 Hz to 20 kHz (digital source);
<0.005%, 20 Hz to 20 kHz (analog line source);
<0.05%, 20 Hz to 20 kHz (microphone source)
Stereo Separation: >108 dB (digital source);
>103 dB (analog source)
Maximum Scaler Input Resolutions:
Input Type Scan Type Resolution
4096x2160 4K DCI
HDMI
RGB/VGA Progressive
crestron.com | 800.237.2041
Progressive
Interlaced 1920x1080 HD1080i 30 Hz 4:4:4 36 bit
3840x2160 Ultra HD
2560x1600 WQXGA 60 Hz 4:4:4 36 bit
1920x1080 HD1080p 60 Hz 4:4:4 36 bit
1600x1200 UXGA 60 Hz n/a
1920x1200 WUXGA 60 Hz n/a
Audio – Microphone Input
Frame
Rate
24 Hz 4:4:4 30 bit
or
30 Hz 4:4:4 24 bit
30 Hz 4:2:2 36 bit
Color
Sampling
Color
Depth
Input Signal Type: Mono analog mic level
Phantom Power: Enable/Disable
Gain: 0 to +60 dB Gain adjustment, plus Mute
EQ Center Frequencies: 50 to 200 Hz (Band 1); 200 to 800 Hz (Band 2);
800 to 3.2k Hz (Band 3); 3.2k to 12.8k Hz (Band 4)
EQ Gain: ±12.0 dB per band
Gating Threshold: -80 to 0 dB
Gating Depth (Attenuation): -80 to 0 dB
Gating Attack: 1 to 250 ms
Gating Release: 1 to 1000 ms
Gating Hold: 1 to 200 ms
DMPS3-4K-100-C 3-Series
®
4K DigitalMedia™ Presentation System 100
Compression Threshold: -80 to 0 dB
Compression Ratio: 1:1 to 10:1
Compression Attack: 1 to 250 ms
Compression Release: 1 to 1000 ms
Compression Hold: 1 to 200 ms
Compression Curve: Hard or soft knee
Audio – Source Inputs
Typical of 8 source input channels (Audio Inputs 1 – 4, HDMI Inputs 1 – 4)
Input Signal Types: Analog 2-channel
compatible
[4]
)
[6]
, HDMI (Dual-Mode DisplayPort
Analog Formats: Stereo 2-channel
Digital Formats: Dolby Digital®, Dolby Digital EX, Dolby Digital Plus,
Dolby® TrueHD, Dolby Atmos®, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res,
DTS-HD Master Audio™, LPCM up to 8 channels
Input Compensation: ±10.0 dB
Audio – Analog Line Output
[8]
[8]
Output Signal Type/Format: Stereo 2-channel
Mic: -80 to +10 dB Level adjustment range, plus Mute and Pan
Source: -80 to +10 dB Level adjustment range, plus Mute and Balance
Master Volume: -80 to +10 dB Level adjustment range, plus Mute
and Mono
Bass: ±12.0 dB
Treble: ±12.0 dB
Equalization: 10-band graphic
GEQ Center Frequencies: 31.5, 63, 125, 250, 500, 1k, 2k, 4k, 8k, 16k Hz
GEQ Gain: ±12.0 dB per band
Delay: 0.0 to 80.0 ms
Limiter Threshold: -80 to 0 dBz
Limiter Ratio: 1:1 to 10:1
Limiter Attack: 1 to 250 ms
Limiter Release: 1 to 1000 ms
Limiter Curve: Hard or soft knee
Audio – Digital Output
Output Signal Types: HDMI, DM 8G+ & HDBaseT
Formats: Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD,
Dolby Atmos, DTS, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master
Audio, LPCM up to 8 channels
Mic: -80 to +10 dB Level adjustment range, plus Mute and Pan
Source: -80 to +10 dB Level adjustment range, plus Mute and Balance
Master Volume: -80 to +10 dB Level adjustment range, plus Mute
Connectors – Audio/Video Inputs
[8]
[8]
[8]
[8]
VGA IN 1 – 4: (4) HD15 female;
Analog VGA/RGB/video inputs;
Signal Types: VGA, RGB, component, S-Video, or composite
[5]
;
Formats: RGBHV, RGBS, RGsB, YPbPr, Y/C, NTSC or PAL;
Input Level: 0.5 to 1.5 Vp-p with built-in DC restoration;
Input Impedance: 75 Ohms nominal;
Sync Detection: RGBHV, RGBS, RGsB, YPbPr;
Sync Input Level: 3 to 5 Vp-p;
Sync Input Impedance: 2.2k Ohms
AUDIO IN 1 – 4: (4) 3.5 mm TRS mini phone jacks;
Unbalanced stereo line-level analog audio inputs;
Input Impedance: 32k Ohms unbalanced;
Maximum Input Level: 2.8 Vrms unbalanced;
Note: If an HDMI input is selected but no digital audio signal is detected, the
corresponding analog audio input is activated (AUDIO 1 for HDMI 1, etc.).
Please note, the analog audio inputs do not pass audio if the HDMI video
input resolution is higher than 1920x1200.
HDMI IN 1 – 4: (4) 19-pin Type A HDMI female;
Digital video/audio inputs;
Signal Types: HDMI, DVI, or Dual-Mode DisplayPort
[4]
MIC IN: (1) 3-pin 3.5 mm detachable terminal block;
Balanced microphone audio input;
Input Level: -60 to 0 dBV, 1 Vrms maximum;
Input Impedance: 6.5k Ohms balanced;
Phantom Power: 48 Volts DC, software enabled/disabled
Connectors – Audio/Video Outputs
HDMI OUT: (1) 19-pin Type A HDMI female;
Digital video/audio output;
Signal Types: HDMI, DVI
[4]
DM OUT: (1) 8-pin RJ45 female, shielded;
DM 8G+ output, HDBaseT compliant;
PoDM and PoH PSE (Power Sourcing Equipment) port;
Connects to the DM 8G+ input of a DM receiver or other DM device, or
to an HDBaseT device, via CAT5e, Crestron DM-CBL-8G, or Crestron
DM-CBL-ULTRA cable
[9]
AUDIO OUT: (1) 5-pin 3.5 mm detachable terminal block;
Balanced/unbalanced stereo line-level audio output;
Output Impedance: 200 Ohms balanced, 100 Ohms unbalanced;
Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced
Connectors - Control & Power
IR OUT: (1) 3.5 mm mini-phone jack;
IR/Serial output port;
IR output up to 1.2 MHz;
1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud
COM: (1) 5-pin 3.5 mm detachable terminal block;
Bidirectional RS-232 port;
Up to 115.2k baud, hardware and software handshaking support
LAN: (1) 8-pin RJ45 female;
10Base-T/100Base-TX Ethernet port
USB 1 – 4: (4) USB Type A female;
USB 2.0 host ports for TT-100 series Crestron Connect It Cable Caddies
[1]
;
Also enables firmware update via USB flash drive
G: (1) 6-32 screw, chassis ground lug
crestron.com | 800.237.2041
DMPS3-4K-100-C 3-Series
®
4K DigitalMedia™ Presentation System 100
NET: (1) 4-pin 3.5 mm detachable terminal block;
Cresnet Master port;
Available Cresnet Power: 24 Watts
100-240V~1.4A 50/60Hz: (1) IEC 60320 C14 main power inlet;
Mates with removable power cord, included
COMPUTER (front): (1) USB Type B female;
USB computer console port;
For setup only
IR IN (front): (1) Infrared sensor;
IR Frequency: 36 to 38 kHz;
IR Formats: Crestron format, RC5;
Allows control from IR wireless remotes using the Crestron or RC-5
command sets
Controls & Indicators
PWR: (1) Bi-color green/amber LED, indicates operating power supplied
from AC line power, turns amber while booting and green when operating
NET: (1) Yellow LED, indicates Cresnet bus activity
MSG: (1) Red LED, indicates internal control system has generated an
error message
HW-R: (1) Recessed pushbutton for hardware reset, reboots the
control system
SW-R: (1) Recessed pushbutton for software reset, restarts the
software program
AUTO INPUT SELECT: (1) Pushbutton and bi-color green/amber LED,
selects auto-switching mode
VGA INPUT SELECT 1 – 4: (4) Pushbuttons for manual input selection,
and (4) bi-color green/amber LEDs to indicate the current active input and
signal presence at each corresponding VGA input
HDMI INPUT SELECT 1 – 4: (4) Pushbuttons for manual input selection,
and (4) bi-color green/amber LEDs to indicate the current active input and
signal presence at each corresponding HDMI input
VOLUME: (1) Continuous turn rotary encoder, adjusts the analog audio
output volume
DM OUT (rear): (2) LEDs, green LED indicates DM link status, amber LED
indicates video and HDCP signal presence, for the DM output
LAN (rear): (2) LEDs, bi-color LED (left) indicates Ethernet speed and
activity, green LED (right) indicates Ethernet link status
Environmental
Temperature: 41° to 104° F (5° to 40° C)
Humidity: 10% to 90% RH (non-condensing)
Heat Dissipation: 122 BTU/hr typical, 89 BTU/hr idle
Enclosure
Chassis: Metal, black finish, fan-cooled, vented sides
Front Panel: Metal, black finish with polycarbonate label overlay
Mounting: Freestanding, 1 RU 19-inch rackmount, or under-table mount
(adhesive feet, rack ears, and under-table mounting brackets included)
Dimensions
Height: 1.74 in (45 mm) without feet
Width: 17.28 in (439 mm);
18.94 in (482 mm) with rack ears
Depth: 10.47 in (266 mm)
Weight
6.4 lb (2.9 kg)
DM 8G+ & HDBaseT Maximum Cable Lengths
Cable Type:
Resolution:
1080p60 Full HD
1920x1200 WUXGA
1600x1200 UXGA
2048x1080 2K DCI
2560x1440 WQHD
2560x1600 WQXGA
3840x2160 Ultra HD
4096x2160 4K DCI
DM-CBL-ULTRA
DM® Ultra
Cable
330 ft
(100 m)
DM-CBL-8G
DM 8G®
Cable
330 ft
(100 m)
230 ft
(70 m)
CAT5e
(or better)
UTP or STP
330 ft
(100 m)
165 ft
(50 m)
[9]
Power Requirements
Main Power: 1.4 Amps @ 100-240 Volts AC, 50/60 Hz
Power Consumption: 36 Watts typical, 26 Watts idle
Available Cresnet Power: 24 Watts
Power over DM (PoDM): PoDM PSE (Power Sourcing Equipment), DM OUT
port supplies up to 15.4W (Class 0-3) to one PoDM PD (Powered Device)
Power over HDBaseT (PoH): PoH PSE (Power Sourcing Equipment), DM
OUT port supplies up to 15.4W (Class 0-3) to one PoH PD (Powered Device)
crestron.com | 800.237.2041
DMPS3-4K-100-C 3-Series
®
4K DigitalMedia™ Presentation System 100
MODELS & ACCESSORIES
Available Models
DMPS3-4K-100-C: 3-Series® 4K DigitalMedia™ Presentation System 100
Available Accessories
TT-100 Series: Crestron Connect It™ Cable Caddy
TSW-752-B-DMPS3_PAK: 7” Touch Screen Package for DMPS3 Series,
Black; Includes: TSW-752-B-S, TSW-750-TTK-B-S, & Preloaded Software
MP-B10: Media Presentation Button Panel B10
AM-100: AirMedia® Presentation Gateway
MP-AMP30: Media Presentation Audio Amplifier
MP-AMP40 Series: Media Presentation Audio Amplifiers, 70 or 100 Volt
AMP Series: Commercial Power Amplifiers
DM-RMC-4K-100-C-1G: Wall Plate 4K DigitalMedia 8G+® Receiver &
Room Controller 100
DM-RMC-4K-100-C: 4K DigitalMedia 8G+® Receiver & Room
Controller 100
DM-RMC-4K-SCALER-C: 4K DigitalMedia 8G+® Receiver & Room
Controller w/Scaler
DM-RMC-4K-SCALER-C-DSP: 4K DigitalMedia 8G+® Receiver & Room
Controller w/Scaler & Downmixing
DM-RMC-200-C: DigitalMedia 8G+® Receiver & Room Controller 200
DM-RMC-SCALER-C: DigitalMedia 8G+® Receiver & Room Controller
w/Scaler
USB-EXT-DM: USB over Ethernet Extender with Routing
GLS-ODT-C-CN: Dual-Technology Occupancy Sensor with Cresnet
GLS-OIR-C-CN: Passive Infrared Occupancy Sensor with Cresnet
Crestron Fusion®: Enterprise Management Platform
Crestron® App: Control App for Apple® iOS® & Android
™
XPanel: Crestron Control® for Computers
3-Series® BACnet™/IP Support: 3-Series Native BACnet/IP Interface
License
CSP-LIR-USB: IR Learner
STIRP: IR Emitter Probe w/3.5mm Mini Phone Plug
CNSP-XX: Custom Serial Interface Cable
DM-CBL-ULTRA: DigitalMedia™ Ultra Cable
DM-CONN: Connector for DM-CBL-ULTRA
DM-CBL-8G: DigitalMedia 8G™ Cable
DM-8G-CONN: Connector for DM-CBL-8G
DM-8G-CRIMP: Crimping Tool for DM-8G-CONN
DM-8G-CONN-WG: Connector with Wire Guide for DM-CBL-8G
DM-8G-CRIMP-WG: Crimping Tool for DM-8G-CONN-WG
CRESNET: Cresnet® Control Cable
CBL Series: Crestron® Certified Interface Cables
MP-WP Series: Media Presentation Wall Plates
MPI-WP Series: Media Presentation Wall Plates - International Version
®
®
Notes:
1. Item(s) sold separately.
2. The AirMedia Presentation Gateway, model AM-100, requires one HDMI input on the
DMPS3-4K-100-C.
3. Some features and functions described in this spec sheet may not be supported using
.AV Framework. For a complete list of capabilities and options supported by .AV Framework,
please visit: www.crestron.com/avframework.
4. HDMI requires an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode
DisplayPort signal. CBL-HD-DVI interface cables are available separately.
5. The VGA inputs can accept component, composite, and S-Video signals using an appropriate
adapter (not included). However, input sync detection is not provided for composite or S-Video
signal types.
6. When using an analog audio input in combination with an HDMI video input, the source’s
video resolution must be 1920x1200 or lower. The analog audio input will not pass audio if the
source’s video resolution is higher than 1920x1200.
7. Automatically passes 3D video if the display device supports it (reverts to pass-through mode
without scaling). Provides automatic 3D-to-2D conversion (with scaling) if the display device
does not support 3D.
8. Routing of a multichannel audio signal via a digital input and output (HDMI or DM) requires
the input to be set for “mixer bypass” mode. When that input is selected, all audio controls on
the digital output are disabled and the ability to route the microphone signal to that output is
defeated. Mixer bypass mode also disables the Input Compensation control on that input.
9. The maximum cable length for DigitalMedia 8G+ (DM 8G+) or HDBaseT is dependent
upon the type of cable and resolution of the video signal. Refer to the “DM 8G+ & HDBaseT
Maximum Cable Lengths” table for a detailed overview. Crestron legacy cable models DM-CBL
DigitalMedia Cable and DM-CBL-D DigitalMedia D Cable support the same resolutions and
cable lengths as CAT5e. Shielded cable and connectors are recommended to safeguard
against unpredictable environmental electrical noise which may impact performance at
resolutions above 1080p. Refer to the Crestron DigitalMedia Design Guide, Doc. #4546
for complete system design guidelines. DM 8G+ is compatible with HDBaseT Alliance
specifications for connecting to HDBaseT compliant equipment. All wire and cables are
sold separately.
10. License required. The DMPS3-4K-100-C supports a maximum of 500 BACnet objects when
dedicated for BACnet use only. Actual capabilities are contingent upon the overall program size
and complexity.
This product may be purchased from an authorized Crestron dealer. To find a dealer, please
contact the Crestron sales representative for your area. A list of sales representatives is available
online at www.crestron.com/salesreps or by calling 800-237-2041.
The specific patents that cover Crestron products are listed online at: patents.crestron.com.
Certain Crestron products contain open source software. For specific information, please visit
www.crestron.com/opensource.
Crestron, the Crestron logo, 3-Series, 3-Series Control System, AirMedia, Auto-Locking,
.AV Framework, Cresnet, Crestron Connect It, Crestron Control, Crestron Fusion, DigitalMedia,
DigitalMedia 8G, DigitalMedia 8G+, DM, DM 8G+, QuickSwitch HD, and Smart Graphics are
either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/
or other countries. BACnet and the BACnet logo are either trademarks or registered trademarks
of American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. in the United
States and/or other countries. Apple, iPad, and iPhone are either trademarks or registered trademarks of Apple Inc. in the United States and/or other countries. Blu-ray is either a trademark or
registered trademark of the Blu-ray Disc Association in the United States and/or other countries.
Dolby, Dolby Atmos, and Dolby Digital are either trademarks or registered trademarks of Dolby
Laboratories in the United States and/or other countries. DTS, DTS-HD, and DTS-HD Master
Audio are either trademarks or registered trademarks of DTS, Inc. in the United States and/or
other countries. IOS is either a trademark or registered trademark of Cisco Technology, Inc. in
the United States and/or other countries. Android is either a trademark or registered trademark
of Google, Inc. in the United States and/or other countries. HDBaseT and the HDBaseT Alliance
logo are either trademarks or registered trademarks of the HDBaseT Alliance in the United States
and/or other countries. HDMI and the HDMI Logo are either trademarks or registered trademarks
of HDMI Licensing LLC in the United States and/or other countries. Other trademarks, registered
trademarks, and trade names may be used in this document to refer to either the entities claiming
the marks and names or their products. Crestron disclaims any proprietary interest in the marks
and names of others. Crestron is not responsible for errors in typography or photography.
Specifications are subject to change without notice. ©2016 Crestron Electronics, Inc.
crestron.com | 800.237.2041
DMPS3-4K-100-C 3-Series
®
4K DigitalMedia™ Presentation System 100
Crestron Electronics, Inc. 15 Volvo Drive | Rockleigh, NJ 07647
Tel: 800.237.2041 / 201.767.3400 | Fax: 201.767.1903
www.crestron.com
All brand names, product names and trademarks are the property of their respective owners.
Specifications subject to change without notice. Revised 04/25/16
©2016 Crestron Electronics, Inc.
Loading...