Crestron CNRFHT-15A, CNRFHT-30A User Manual

Crestron CNRFHT-15A/30A
Hand-Held Wireless Transmitters
Operations Guide

This document was prepared and written by the Technical Documentation department at:

Crestron Electronics, Inc.

15 Volvo Drive

Rockleigh, NJ 07647

1-888-CRESTRON

All brand names, product names and trademarks are the property of their respective owners.

©2002 Crestron Electronics, Inc.

Crestron CNRFHT-15A/30A Hand-Held Wireless Transmitters

Contents

Hand-Held Wireless Transmitter: CNRFHT-15A/30A 1

Introduction ...............................................................................................................................1

Specifications ..............................................................................................................2

Physical Description.................................................................................................... 2

Industry Compliance ...................................................................................................5

Setup .......................................................................................................................................... 5

Applying Power........................................................................................................... 5

RF ID...........................................................................................................................5

Programming .............................................................................................................................8

Programming with the Crestron AppBuilder...............................................................8

Programming with SIMPL™ Windows.....................................................................8

Custom Button Panel Engraving ...............................................................................12

Problem Solving ......................................................................................................................13

Troubleshooting......................................................................................................... 13

Further Inquiries........................................................................................................ 14

Future Updates ..........................................................................................................14

Return and Warranty Policies.................................................................................................. 15

Merchandise Returns / Repair Service ......................................................................15

CRESTRON Limited Warranty.................................................................................15

Operations Guide – DOC. 8092A Contents • i

Crestron CNRFHT-15A/30A Hand-Held Wireless Transmitters

Hand-Held Wireless Transmitter:
CNRFHT-15A/30A

Introduction

The CNRFHT-15A/30A is a compact, lightweight, hand-held wireless RF
transmitter. Designed to operate in conjunction with the CNRFGWA 1-way RF
gateway/receiver to communicate with a Cresnet control system, it is an ideal user
interface to control audio, video, and lighting in a boardroom or conference room.

The hand-held transmitter is available with 15 or 30 button controls, and both
configurations are also available in an international version. The –30A configuration
permits full use of all 30 available buttons; the –15A configuration permits use of
any 15 of the 30 available buttons (refer to “Custom Button Panel Engraving” on
page 12 for details). Pressing any button on the customized 15- or 30-button panel
initiates an RF signal transmission of the button’s join number to the CNRFGWA.

The hand-held transmitters are continually in a power-saving sleep mode to extend
battery life. The unit activates immediately when a button is pressed; it is not
necessary to hold down a button.

Functional Summary

• Available in a 15- or 30-button customizable configuration

• Power-saving “sleep” mode; immediate activation upon button

press

• Includes custom engraving, colored button caps, plus a choice
of button configurations and panel finishes

• 1-Way RF Communication via the CNRFGWA gateway, range
up to 300 feet

Operations Guide – DOC. 8092A Hand-Held Wireless Transmitter: CNRFHT-15A/30A• 1

Hand-Held Wireless Transmitters Crestron CNRFHT-15A/30A

Specifications

The table below provides a summary of specifications for the transmitter.

Specifications of the CNRFHT-15A/30A Transmitter

SPECIFICATION DETAILS

Power Requirements (1) 9VDC alkaline battery (included)

RF Specifications 1-Way Wireless RF Transmitter, 433.92 MHz (418

Control System Update Files

2-Series Control System Update File

CEN/CN-TVAV Update File

CNMSX-AV/Pro Update File

CNRACKX/-DP Update File

ST-CP Update File

Default RF ID 11

Operating Temperature 50° to 113°F (10° to 45°C)

Humidity 10% to 90% RH (non-condensing)

Dimensions Height: 6.50.in (16.5 cm)

Weight (without battery) 0.25 lb (0.11 kg)

1. Requires Crestron CNRFGWA 1-Way RF Receiver, or ST-CP SmarTouch Control Processor.

2. The latest versions can be obtained from the Downloads | Software Updates section of the Crestron
website (www.crestron.com)

3. Crestron 2-Series control systems include the AV2, CP2, MP2, PAC2, PRO2, and RACK2.

4. CNX update files are required for either CNMSX-AV/Pro or CNRACKX/-DP. Filenames for CNX
update files have a UPZ extension and ST-CP files are in one EXE or zipped UPZ file. To avoid program
problems, make certain you are using the update file with the correct suffix letter (e.g., S, V, W, X).

2, 3, 4

. Refer to NOTE after last footnote.

MHz CNRFHT-15A/30A/UK), Range up to 300 feet

All Versions

Width: 2.75 in (6.85 cm)

Depth: 0.80 in (2.03 cm)

1

NOTE: Crestron software and any files on the website are for Authorized Crestron
dealers only. New users may be required to register to obtain access to certain areas
of the site (including the FTP site).

Physical Description

The CNRFHT-15A/30A electronic hardware is housed in a slim, high-impact
molded ABS black plastic enclosure. Refer to the figure on the next page. A
customized button panel covers a 30-button array on the printed circuit board. All
button panels include custom engraving, colored button caps, choice of button
configurations, and panel finishes. Small and large button caps are available. A small
button cap covers one button. A large button cap covers two buttons, either
horizontally or vertically. Refer to “Custom Button Panel Engraving” on page 12 ,
for more information on designing custom button panels.

NOTE: Crestron does not recommend designing large button caps for single
functions. Pressing the center of a large button cap can cause the unit to transmit
incorrectly which may result in the control system misinterpreting the user's intent.
Therefore, design large button caps for dual functions, such as a volume up/volume
down rocker-type button.

A red Transmit LED is located above the button panel cover. The battery
compartment on the rear of the unit holds one standard 9VDC alkaline battery.

2 • Hand-Held Wireless Transmitter: CNRFHT-15A/30A Operations Guide – DOC. 8092A