> Supports remote dimmers and switches (CLW-SLVU-P)
> Screw-clamp connectors for easy installation
> Stylish bargraph provides real-time status feedback
The CLW-SWEX-P is a Cameo® wireless in-wall switch which features
field-replaceable, engravable buttons. Available in designer colors and configurable with two buttons or in a rocker layout, the CLW-SWEX-P is more
versatile than previous generations of in-wall switches. Its streamlined
design matches the entire line of Cameo dimmers, switches and keypads,
making it a great addition to new or retrofit installations. In addition to its
attractive look and feel, infiNET EX® communication technology brings
proven reliability to the CLW-SWEX-P.
Field-Replaceable Button Faces
Like their cousin Cameo keypads, the buttons on the CLW-SWEX-P can
be swapped in the field, making it easy to change engraving or color after
installation. The rocker controller brings a familiar user interface to the
Crestron® in-wall switch, while the two-button layout offers clear on/off
control.
infiNET EX
Ultra-reliable infiNET EX wireless technology provides steadfast two-way
RF communications throughout a residential or commercial structure
without the need for physical control wiring. Employing a 2.4 GHz mesh
network topology, each infiNET EX device functions as an expander,
passing command signals through to every other infiNET EX device within
range (approximately 150 feet or 46 meters indoors), ensuring that every
command reaches its intended destination without disruption.
[1]
The CLW-SWEX-P communicates with a Crestron control system via an
infiNET EX Wireless Gateway (model CEN-RFGW-EX, DIN-AP3MEX, or
[2]
MC3
). Up to 100 infiNET EX devices, including Cameo Wireless Keypads
and In-Wall Switches
[2]
, may coexist on a single wireless network, and
every device that is added to the network effectively increases the range
and stability of the entire network by providing multiple redundant signal
[1]
paths
.
Streamlined Installation
In addition to field replaceable buttons, the CLW-SWEX-P features screwclamp connectors for simplified wiring while reducing installation time and
material costs. So slim, the Cameo line can be installed in standard gang
boxes making them the perfect choice for both new and retrofit projects.
Remote Switch
The CLW-SWEX-P supports control of the same lights from more than one
location. Easily replace existing dimmers and switches wired in a traditional three- or four-way circuit with on/off control from every location, or
design new projects to accommodate remote switches wherever desired.
The CLW-SLVU-P remote dimmer simply connects to the “traveler” wire
and switches the load attached to the CLW-SWEX-P.
Custom Programmable Keypad
Because the CLW-SWEX-P is attached to the Crestron network, it can
also function as a keypad, sending commands to trigger whole-room or
house lighting scenes, or any other function. The two-button layout takes
advantage of prime single-gang wall box real estate. Use buttons to control
in-room audio or lamps. Press-and-hold and double-tap functionality allows buttons to be used for more than just one function.
Range (typical): 150 ft (46 m) indoor, 250 ft (76 m) outdoor to nearest
mesh network device(s); subject to site-specific conditions and individual
device capabilities
1. Any infiNET EX device that provides expander functionality will effectively extend the range
of the wireless network beyond the initial range of the gateway. Battery-powered infiNET EX
devices do not provide expander functionality. A dedicated infiNET EX Wireless Expander, model
CLW-EXPEX or GLA-EXPEX is also available.
2. Item(s) sold separately.
3. A neutral wire is required for normal operation. Refer to the manual for alternate wiring
configurations.
This product may be purchased from an authorized Crestron dealer. To find a dealer, please
contact the Crestron sales representative for your area. A list of sales representatives is available
online at www.crestron.com/salesreps or by calling 800-237-2041.
The specific patents that cover Crestron products are listed online at: patents.crestron.com.