> Standard 3-1/2 inch (89 mm) deep electrical box installation
> Available in twelve designer colors and finishes
> Matching decorator-style faceplates available
> CEC Title 24 2013 compliant
[1]
[2]
[1]
[3]
[1]
The Cameo® CLW-DELVEX-P is an in-wall lighting dimmer designed to
control a range of dimmable lighting load types including electronic lowvoltage, LED, incandescent, tungsten-halogen, electronic CFL, and 2-wire
fluorescent ballasts. Its buttons are configurable, engravable, and field-
replaceable to allow for a variety of layouts and custom functionality. A
choice of twelve designer colors provides an attractive appearance in
any décor.
The CLW-DELVEX-P can be operated standalone or integrated with
a Crestron® control system or Crestron Pyng® system. Ultra-reliable
infiNET EX® wireless communications simplifies installation and wiring
for both new and retrofit applications. Compatibility with Cameo In-Wall
Remote Dimmers (CLW-SLVU-P
[1]
) enables multipoint 3- and 4-way
lighting control. The CLW-DELVEX-P is rated for 500 VA/Watts maximum
at 120 Volts AC, 50/60 Hz.
[2]
Reverse Phase Dimming
The CLW-DELVEX-P employs reverse phase (trailing edge) dimming
technology to handle electronic low-voltage (ELV) transformers feeding
halogen or LED lighting fixtures. It is also capable of controlling
incandescent, tungsten-halogen, dimmable screw-base type CFL and LED
bulbs, and 2-wire dimmable fluorescent ballasts.
Customizable Buttons
Each Cameo dimmer features the ability to configure its buttons in a
variety of layouts to adapt its functionality to the application. Simple up/
down dimming and on/off switching can be achieved using a single rocker
switch or individual buttons. More sophisticated functionality is afforded
using up to four buttons, allowing up to three dimming presets to be stored
and recalled at will. Through integration with a control system, buttons
may even be assigned to control a second lighting zone, select a wholeroom lighting scene composed of several dimmers, turn on a ceiling fan, or
adjust the audio system volume.
[3]
crestron.com | 800.237.2041
CLW-DELVEX-P Cameo® Wireless In-Wall ELV Dimmer, 120V
The CLW-DELVEX-P is furnished with a complete set of button caps to
accommodate any desired button layout. Button caps may also be ordered
with custom engraving
[1]
, allowing each button to be labeled according to
its function. The buttons are field configurable and replaceable, allowing
changes to be made at any time.
White LED indicators are included to provide feedback when a button is
pressed or a preset is selected. They also function as a bargraph to display
the dimming level as the dimmer is adjusted. When the load is turned off,
the top LED glows dimly, allowing the dimmer to be located easily in a
dark room.
Multipoint Dimming Control
Controlling a single lighting circuit from more than one location is enabled
by adding one or more CLW-SLVU-P remote dimmers.
[1]
Remote dimmers
are wired to the CLW-DELVEX-P through the high-voltage wiring in a
manner similar to conventional 3- or 4-way switching. In fact, it is possible
to simply replace the switches in an existing 3- or 4-way wired circuit
without installing any new wiring. Up to nine remote dimmers can be
connected to a single CLW-DELVEX-P, allowing on/off and up/down
dimming control of a single lighting load from up to ten locations.
Alternately, the CLW-DELVEX-P may be controlled from any Crestron
keypad, touch screen, handheld remote, or mobile device app when
integrated with a Crestron control system or Crestron Pyng system.
infiNET EX® Wireless Technology
Ultra-reliable infiNET EX wireless technology provides steadfast two-way
RF communications throughout a residential or commercial structure
without the need for physical control wiring. Employing a 2.4 GHz mesh
network topology, each infiNET EX device (including the CLW-DELVEX-P)
functions as an expander, relaying command signals through to every
other infiNET EX device within range (approximately 150 feet or 46 meters
indoors), ensuring that every command reaches its intended destination
without disruption.
[4]
The CLW-DELVEX-P communicates with a Crestron control system via an
infiNET EX Wireless Gateway (model CEN-GWEXER, MC3, or DIN-AP3MEX
[1]
Up to 100 infiNET EX devices may coexist on a single wireless network,
and every device that is added to the network effectively increases the
range and stability of the entire network by providing multiple redundant
signal paths.
[4]
Controls & Indicators
Buttons: Configurable with one 2-position rocker or up to 4 single-action
pushbuttons, refer to the Operations & Installation Guide for all possible
configurations and functions
Button Caps: Includes (1) rocker, (2) large, and (4) small button caps;
all button caps are blank, custom engraved button caps are available
separately
Button Modes: Local (default functionality, no control system required),
Remote (custom functionality via a control system)
Feedback LEDs: (7) White LEDs, indicate the current button press or active
preset, displays the dimming level as a 7-segment bargraph
Air-Gap Switch: (1) Latching push switch, opens the air-gap to de-energize
the load output
Program Button: (1) Pushbutton, used to store presets and change the
button configuration
RF Transceiver: infiNET EX 2-way RF, 2.4 GHz ISM Channels 11-26 (2400
to 2483.5 MHz), default channel 15; IEEE 802.15.4 compliant
Range (typical): 150 ft (46 m) indoor, 250 ft (76 m) outdoor, to nearest
mesh network device(s); subject to site-specific conditions and individual
device capabilities
[4]
Gateway: Requires an infiNET EX gateway or Crestron Pyng control hub
Connections
Hot: (1) 16 AWG Class 1 flying lead, black, line power input
Load: (1) 16 AWG Class 1 flying lead, red, dimmed load output
Remote: (1) 16 AWG Class 1 flying lead, blue, remote dimmer connection
Neutral: (1) 16 AWG Class 1 flying leads, white, neutral
Ground: (1) 16 AWG Class 1 flying lead, green, ground
).
Environmental
Temperature: 32° to 104° F (0° to 40° C)
Humidity: 10% to 90% RH (non-condensing)
CLW-DELVEX-P-W-S: Cameo® Wireless In-Wall Dimmer, ELV, 120V,
White Smooth
CLW-DELVEX-P-W-T: Cameo® Wireless In-Wall Dimmer, ELV, 120V,
White Textured
Notes:
1. Item(s) sold separately.
2. Load capacity is derated when installed with other devices in a multi-gang electrical box.
Derating is as follows: 400W if installed adjacent to another device, 250W if installed between
two devices.
3. Control of a second lighting zone or whole-room lighting scene, or control of audio equipment,
a fan motor, or any other equipment, requires the purchase and installation of additional
hardware and custom programming services. Contact a Crestron representative for
additional information.
4. AC-powered infiNET EX devices, including the CLW-DELVEX-P, function as wireless
“expanders,” which effectively extend the range of the wireless network beyond the initial
range of the gateway. Battery-powered infiNET EX devices do not provide expander
functionality. Crestron offers dedicated infiNET EX expanders (models CLW-EXPEX or
GLA-EXPEX, sold separately), which may be deployed to fill gaps in coverage and extend the
wireless range of the mesh network. Up to 100 infiNET EX devices are permitted per gateway,
although best practices suggest a limit of approximately 50. Additional gateways may be
deployed to support more devices, with a maximum of 16 gateways permitted on a complete
system (RF conditions allowing).
5. For connection to one or more Crestron model CLW-SLVU-P remote dimmers. A maximum
of nine (9) remote dimmers is permitted. Not compatible with conventional mechanical 3- or
4-way switches.
This product may be purchased from an authorized Crestron dealer. To find a dealer, please
contact the Crestron sales representative for your area. A list of sales representatives is available
online at www.crestron.com/salesreps or by calling 800-237-2041.
The specific patents that cover Crestron products are listed online at: patents.crestron.com.
Certain Crestron products contain open source software. For specific information, visit