Creston QP-200-CSWP-P QUICK GUIDE

1

quickstart guide

QuickPack QP-200-CSWP-P

www.crestron.com

888.273.7876 201.767.3400

©2010 Specifications subject to
change without notice.

QP-200-CSWP-P

Complete Classroom AV System Package

All brand names, product names, and trademarks
are the property of their respective owners.

QUICKSTART DOC. 7059A (2028517) 10.10

Crestron® QuickPack systems provide educators with a simplified, comprehensive
classroom presentation solution that saves time and money. Designed to deliver the
highest level of quality and convenience without using up your AV/IT budget, Quick­Packs assemble all the vital pieces needed to outfit your classrooms for an engaging
teaching experience.

QuickPacks make it easy and affordable to install a quality projection system in every
classroom, ending the days of wheeling in the AV cart, or forcing students to squint at a
tiny TV screen. The QP-200-CSWP-P package includes a professional wall mount
controller, high-performance speakers and amplifier, universal projector mount, multi­media input wall plates, and cabling. Just add your choice of video projector and
screen and you have installed a complete classroom presentation system. QuickPacks
also integrate seamlessly with interactive whiteboards and wireless microphones.

The diagram to the right shows a typical QP-200-CSWP-P system arrangement.

1

Verify Contents

Before starting installation procedures, check the contents of your system
packages. You should have received the items listed in the following table.
Retain all documents and parts supplied for use in the installation process.

DESCRIPTION PART NUMBER QTY

Media Presentation Controller™, White MPC-M5-W 1

Media Presentation Audio Amplifier MP-AMP30 1

Ceiling Mount Media Presentation Speakers, Pair, White FSDI8-W 1

Media Presentation Wall Plate, Video & Audio, White MP-WP100-W1 1

Media Presentation Wall Plate, VGA & Audio, White MP-WP131-W1 1

Universal Short-Throw Projector Wall Mount, White PMTW-50-W2 1

Power Pack for MP-AMP30 PW-2420RU 1

PoE Injector for MPC-M5 PWE-4803RU 1

RS-232 Projector Control Cable, Plenum, 50 ft (15 m) CBL-KSERIAL-DB9-L-P-503 1

Ethernet LAN Cable, Plenum, 50 ft (15 m) CBL-CAT5E-P-503 1

Speaker Cable, 16AWG, Plenum, 35 ft (11 m) CBL-SPK-P-35 2

RCA Video & Stereo Audio Cable, Plenum, 50 ft (15 m) CBL-KAV-RCAM3-L-P-50

3, 4

1

HD15 VGA Cable, Plenum, 50 ft (15 m) CBL-KVGA-L-P-50

3, 4

1

RCA Stereo Audio Cable, Plenum, 50 ft (15 m) CBL-KAUDIO-RCAM2-L-P-503 1

Projector-to-Amplifier RCA Stereo Audio Cable, 3 ft (1 m) (Supplied with MP-AMP30) 1

Projector-to-Amplifier RCA Stereo Audio Cable, 6 ft (2 m) 2025534 1

RCA to 3.5mm Mini-TRS Stereo Audio Adapter CBL-AUDIO-RCAF-0.53 3

1-Gang Decorator Style Faceplate, White FPL-G1-W-T 2

1-Gang Low-Voltage Trim Ring BB-G1-LV 2
2-Gang Low-Voltage Trim Ring BB-G2-LV 1

1. Each package includes a 2-gang post-construction trim ring for the MPC-M5-W, and a 1-gang post-construction
trim ring and decorator style faceplate for each wall plate.

2. The PMTW-50-W is shipped in a separate package.

3. Specified in illustration on page 2.

4. Includes uninstalled RCA and/or BNC compression connectors as required for termination at the wall plate.
Installation requires IDEAL OmniSeal™ 30-793 or equivalent compression tool (not included).

2

Installation

1. Refer to the documentation supplied with your projector to determine the optimum
mounting location.

2. Install the PMTW-50-W Universal Short-Throw Projector Wall Mount following the
instructions contained in the latest version of the Installation Guide (Doc. 7037),
supplied.

3. Mount the FSDI8-W speakers in the ceiling grid following the instructions contained in
the latest version of the QuickStart Guide (Doc. 7070), supplied.

4. Mount the Media Presentation Wall Plate devices in appropriate locations in the room.

5. Run the cables for the system. The supplied cables are plenum rated so they can be
routed above the ceiling, and are already terminated for the projector end. The
opposite ends are not terminated to make it easier to route the cables through the
projector mount, the walls and ceiling.

6. Connect the cables to the MP-AMP30 Media Presentation Audio Amplifier and
place it in the storage area of the PMTW-50-W wall plate. Refer to the diagram to
the right. (Use the supplied 6 ft (2 m) RCA cable if the optional extension arm is used
on the PMTW-50-W.)

7. Terminate BNC and RCA fittings as required.

8. Configure the MPC-M5 using the MPC Wizard in SystemBuilder™, which can be
obtained at the following website:

www.crestron.com/quickpacks.

Tools Required - Not Supplied

Hand-Held Drill
Wire Cutter
Wire Stripper
Philips Screwdriver(s)
Flatblade Screwdriver(s)
Compression Tool for supplied RCA

and BNC connectors (Refer to
footnote 4 in the table on this
page.)

LAN

LAN PoE

POWER

PWE-4803RU

AC POWER

CORD

POWER

LIGHTS

OFF

LIGHTS

ON

SCREEN

DOWN

SCREEN

UP

VOLUME

DOWN

VOLUME

UP

DVD

LAPTOP

PC

MPC-M5MPC-M

5

PROJECTOR

MP-WP100

LAN

PW-2420RU

MP-AMP30

CRESTRON

2 CHANNELS 15 WATTS

VGA

AUDIO

CBL-VGA-AUD*

MP-WP131

MP-AMP30

AC POWER

CORD

Control Cable 50’

MPC-M5

POWER

LIGHTS

OFF

LIGHTS

ON

SCREEN

DOWN

SCREEN

UP

VOLUME

DOWN

VOLUME

UP

DVD

LAPTOPPC

MPC-M5MPC-M

5

*These Cables Sold Separately

CAT5E Cable 50’

3’ or 6’

LAPTOP

35’ (x2) CBL-SPK-P-35

50’ A/V Cable

50’ Video

50’ Audio

CBL-RCA*

CBL-RCA2*

VCR DVD

Cables

Cable Opening

Projector
Connections

MP-AMP30

WALL

MOUNT

PMTW-50-W

PMTW-50-W

(Shown without

optional extension arm)

CEILING

SPEAKERS

FSDI8-W

TM

2

quickstart guide

QuickPack QP-200-CSWP-P

www.crestron.com

888.273.7876 201.767.3400

©2010 Specifications subject to
change without notice

QP-200-CSWP-P

QUICKSTART DOC. 7059A (2028517) 10.10

Complete Classroom AV System Package

All brand names, product names, and trademarks
are the property of their respective owners.

For use with projectors that are not part of
the RoomView

®

Connected Devices family.

CBL-KVGA-L-P-50

WP-131

CBL-KAV-RCAM3-L-P-50

WP-100

Rear

LGR

Rear

Terminate with supplied BNC

compression fittings.

Red

Green

Blue

Black

Cable will

contain

either a

white wire

or a yellow

wire.

Red

Green

Blue

Black

Gray

TYPICAL PROJECTOR

Red

Green

Blue

L R
+ - + -

Terminate with supplied
RCA compression fittings.

CBL-KAUDIO-RCAM2-L-P-50

Twist shields together and
insert into ‘G’ terminal of
3-pin detachable
connector (supplied).

Strip the ends of the wires approximately
3/8 inch (12 mm). Observe the correct
polarity (+ (red) to + terminal and - (black)
to - terminal) and insert into the two 2-pin
detachable connectors (supplied).

Terminate with
supplied RCA
compression
fittings.

MPC-M5

MP-AMP30

PWE-4803RU

CBL-SPK-P-35

RCA - RCA Cable

3 ft (1 m) or 6 ft (2 m)

(supplied)

CBL-AUDIO-RCAF-0.5

CBL-AUDIO-RCAF-0.5

LAN PoE

CBL-KSERIAL-DB9-L-P-50

NOTE: Projector volume is

controlled via the MPC-M5.

If the Crestron logo ( ) is present on your projector, then your projector
is part of the RoomView Connected Devices family, and supports advanced direct
connectivity with the MPC-M5. Utilizing the projector’s built in LAN port, the
MPC-M5 can directly interface with the projector, offering a host of advanced
monitoring and configuration options that far exceed the capabilities of basic serial
and IR control. You will not need to use the provided CBL-KSERIAL-DB9-L-P-50
cable if you choose to take advantage of this great feature.
For more information, please refer to the following site:

www.crestron.com/quickpacks.

LAN

LAN

Strip the speaker end of the
cable wires approximately
5/8 inch (15 mm) and twist
the bared strands.

Use the wire nuts supplied
with the speakers to connect
the speaker wires with the
speaker cable wires, (red to
red and black to black). Refer
to Doc. 7070 supplied with
the speakers for details.

FSDI8-W