Creston PW-2407WU INSTALLATION

Crestron PW-2407WU
Power Pack

Installation Guide

This document was prepared by the Technical Documentation department at:

Crestron Electronics, Inc.

15 Volvo Drive

Rockleigh, NJ 07647

1-888-CRESTRON

Regulatory Compliance

This product is Listed to applicable UL Standards and requirements by Underwriters
Laboratories Inc.

As of the date of manufacture, the PW-2407WU has been tested and found to comply
with specifications for CE marking, standards per EMC and Radiocommunications
Compliance Labelling and Japan electrical appliance and material safety law.

PS

E

The PW-2407WU complies with section 301 of the Energy Independence and Securities
Act (EISA).

Energy Efficiency Level

IV

All brand names, product names and tr ademarks are the property of their re spective owners.

©2010 Crestron Electronics, Inc.

Description

The PW-2407WU is a regulated universal LPS (limited power source)
power pack that is used to power a 24 Volt Crestron
standard AC receptacle (100-240 VAC, 50-60 Hz). It is designed for
indoor use only.

CAUTION: Connect this power pack only to a Crestron device that is
rated at 24 Volts (regulated) and no more than 0.75 Amps. Plugging
this power pack into a Crestron device that has a different rating could
damage the device or the power pack.

®

product from a

Specifications

Specifications for the PW-2407WU are listed in the following table.

PW-2407WU Specifications

SPECIFICATION DETAILS

Power

Input
Output

Cable Length 6 feet (~1.8 meters)

Environmental

Temperature
Humidity

Dimensions

Height
Width
Depth

Weight 5 oz (144 g)

100-240 Volts AC, 50/60 Hz
24 Volts DC @ 0.75 Amps, regulated,
using male barrel (5.5 x 2.1 mm)
connector

41° to 104° F (5° to 40° C)
10% to 90% RH (non-condensing)

2.90 in (74 mm)

1.72 in (44 mm)

1.38 in (35 mm) without adapter