Crest audio HD18 SPECIFICATIONS
POWER AMPLIFIER
HD18
Preliminary Product Description
The Crest Audio HD18 professional power amplifier is designed
to achieve unsurpassed sonic performance and long-term reliability – even when operating under extreme stress - in touring or
fixed installation applications. The HD18 provides high power
output coupled with true clarity, and is well-suited for high-powered subwoofers and passive full range systems.
Absolute sonic accuracy is the hallmark of every Crest amplifier.
Bass is solid and defined to the limits of audibility, with ample
current reserves delivered by an “over-engineered” power supply
and advanced Class H circuitry. Wide-bandwidth output devices
assure detailed, transparent high frequency response. And, thanks
to Crest’s exclusive IGM circuit, the HD18 will drive 2Ω loads
safely without compromise in performance.
Construction and Quality Control
The
HD18
is built exclusively in Crest’s own USA manufacturing facility, with internal components selected for premium
quality and proven durability. Each modular subassembly is
HD18
pre-tested, and once assembled, the
“hot room” burn-in before thorough final pre-shipment checkout
on precision test equipment.
Power Specs: Other HD Series Power Amplifiers
4 Ω Stereo HD2 HD4 HD6 HD9 HD12
1kHz, 0.01% THD+N 250W 435W 600W 900W 1200W
20Hz-20kHz, 0.1% THD+N 200W 400W 500W 800W 1100W
receives a rigorous
HD18 Features
• Crest’s legendary “overbuilt” power supply
• Toroidal power transformer
• Latest generation of high-speed, wide-bandwidth output
devices
• Twin tunnel cooling with back-to-front air flow
• Dual, variable speed DC fans
• Massive, extruded aluminum heat sinks
• Balanced XLR and 1/4-inch (TRS) inputs
• 2 pair of 5-Way Binding Post Outputs
• External switches for stereo/parallel/bridged mono mode,
Pin 2/3 hot (+),
• TourClass®protection circuits:
- ACL (Active Clip Limiting) prevents speaker damage with
gentle gain reduction at clip threshold.
- IGM (Instantaneous Gain Modulation) monitors speaker
loads to detect conditions that may overstress output
devices, allowing safe operation into nominal 2Ω impedances.
- AutoRamp gradually increases gain to attenuator setting
level when amplifier is turned on.
- TourClass protection also includes comprehensive thermal
management, short circuit, DC voltage, turn-on/off transient, current inrush and sub/ultrasonic input protection.
• Recessed, stepped attenuators
• Front panel circuit breaker switch
• Modular construction
• Three-year warranty*
ground lift, and gain/input sensitivity
Protect
Clip
Active
Signal
Ch A
Protect
Clip
Active
Signal
Ch B
Power Specifications 8Ω Stereo 4Ω Stereo 2Ω Stereo 8Ω Bridged 4Ω Bridged
1kHz, 0.01% THD+N 1000W 1800W 2500W 3600W 5000W
20Hz-20kHz, 0.1% THD+N 950W 1700W 2400W 3400W 4800W
-6
-10
-3
-15
-30
-80
-10
-15
-30
-80
-1
0dB
-6
-3
-1
0dB
Figures are Watts per channel, both channels driven.
HD18 POWER AMPLIFIER
SPECIFICATIONS
1kHz, 0.03% THD+N 20Hz-20kHz, 0.1% THD+N
8Ω Stereo Power
4Ω Stereo Power
2Ω Stereo Power
8Ω Bridged Mono Power
4Ω Bridged Mono Power
Max RMS Output Voltage
(each channel)
Peak Output Voltage (each channel)
Frequency Response (+0 / -0.3dB, 1W/8Ω)
Power Bandwidth (rated power at 4Ω, 1% THD+N)
TourClass®Protection
1000W 950W
1800W 1700W
2500W 2400W
3600W 3400W
5000W 4800W
99V
140V
20Hz-20kHz, -3dB@150kHz
20Hz-20kHz, -.2dB/+.2dB
ACL, IGM, AutoRamp, short circuit, DC voltage,
turn-on/off transient, current inrush, sub/ultrasonic input.
THD+N
(rated power at 4Ω, 1kHz)
SMPTE IMD (rated power at 8Ω, 60Hz & 7kHz)
Slew Rate
Damping Factor
(10-400Hz at 8Ω)
Input CMRR (1kHz)
Input Sensitivity (rated power at 8Ω )
Voltage Gain
Input Impedance (balanced/unbalanced)
Hum and Noise
(“A” weighted, full power, 4Ω)
Crosstalk (“A” weighted, full power, 4Ω)
Input Connectors
(per channel)
Output Connectors (per channel)
Filter Storage
Power Supply
(factory configured)
Idle Current Draw 120V
1/8 Power Curr. Draw
(typical music, 120V/4Ω)
1/3 Power Curr. Draw (continuous music, 120V/4Ω)
Max Curr. Draw (circuit breaker rating, 120V/4Ω)
Thermal Emissions (1/8 Power, 4Ω)
Thermal Emissions (1/3 Power, 4Ω)
<0.03%
<0.01%
25V/µs
800:1
> - 70dB
.775V standard (switchable; see table below)
X115 standard (switchable; see table below)
>20kΩ/>10kΩ
-115dB
> - 80dB
Class
H
Female XLR (pin 2+, switchable for pin 3+), TRS (tip+)
2 pair of 5-way output binding posts
144,000 µF
100V-240V, 50-60Hz
3.0A
12.0A
25.0A
36.0A
7125 BTU/hr
9450 BTU/hr
Cooling
Back-to-front via 2 rear panel mounted variable-speed DC fans
(filters removable without tools)
Controls
Front Panel: 2 attenuators; Rear Panel Switches: signal ground lift,
mode select, gain select, XLR input pin 2/3 hot (+)
LED Indicators
Dimensions
(Height x Width x Depth)
Gross Weight, Net Weight
Gain/Sensitivity Options Factory Standard X115 .775V
(per channel)
Construction
Warranty
Clip/Limit, Signal, Temp/DC, Active
Steel chassis, 16 gauge. Double thickness in rack ear areas.
5.25" x 19" x 18" / 133 x 483 x 457mm
82 lbs. (37.23 kg.), 77 lbs. (34.96 kg.)
3 years
Gain Sens
Option 1 X40 2.24V
Option 2 X20 4.47V
Architect’s & Engineer’s Specifications
The power amplifier shall have two channels. At 8 ohms, 20Hz
- 20kHz, 0.1% THD+N, it shall deliver a minimum of 950 watts
per channel. At 4 ohms, 20Hz - 20kHz, 0.1% THD+N, it shall
deliver a minimum of 1700 watts per channel. In bridged mono
mode with an 8 ohm load, 20Hz - 20kHz, 0.1% THD+N, it
shall deliver a minimum of 3400 watts.
The amplifier shall have circuitry to protect itself from output
short circuits, thermal overload or other adverse load conditions. The amplifier shall protect speaker loads from DC voltage on outputs. The amplifier shall have active clip limiting
and impedance sensing circuitry. Output relays shall protect
the speakers from amplifier failure.
Two rear panel mounted variable speed DC fans (filters
detachable without tools) shall provide back to front air flow
through the chassis.
Each channel shall have a standard (factory-set) input sensitivity of .775 volt, and shall be fitted with an external switch
which allows the gain to be altered to X20 or X40. The hum
and noise level shall be 115 dB below rated output, “A”
weighted. SMPTE IMD shall be less than 0.01% at rated
power, 60Hz and 7kHz. The amplifier shall have a class H output stage. The frequency response shall be 20Hz-20kHz, +0,
-0.3dB (1W 8Ω).
The amplifier will operate at 100V-240V, 50-60 Hz AC (configured at factory). Maximum current draw shall not exceed 36
amperes at 120VAC (limited by front panel breaker).
Front panel indicators shall include Active, Protect, Signal,
and Clip LED’s for each channel. Front panel attenuators
shall be recessed and detented.
Rear panel input connectors shall be female TRS, and XLR
type, rear-panel switchable for pin 2 (factory setting) or pin 3
positive. Output terminations shall be 2 pair of 5-way output
binding posts. Rear panel switches for ground lift,
Stereo/Parallel/Bridged Mono mode, XLR polarity and gain
selection shall also be provided.
A rear-panel single AC mains cord having an appropriate AC
plug for the intended operating voltage shall be provided ..
The packaging of the amplifier shall allow for standard rack
mounting without requiring space between similar units.
Optional rack mount handles will be available. Dimensions
shall be 19" (483mm) wide, 5.25" (133mm) high and 18"
(457mm) deep. The amplifier shall weigh 77 lbs. (34.96 kg.)
net, and shall be designated the Crest Audio model HD18 .
Rear View
Power figures are watts per channel, both channels driven.
Crest Audio reserves the right to
make improvements in manufacturing or design which may affect
specification.
Crest Audio specification literature is available in downloadable
PDF format; visit our website at:
http://www.crestaudio.com.
©1997 Crest Audio Inc.
v. 1.0 5/14/97 C3400006
C3400006
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS : RISQUE DE CHOC ÉLECTRIQUE—NE PAS OUVRIR
WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT
EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
ATTENTION! POUR ÉVITER LE RISQUE D'INCENDIE OU DE CHOC
ÉLECTRIQUE, NE PLACEZ PAS CET APPAREIL SOUS LA PLUIE OU Á
L'HUMIDITÉ
A
+
+
+
B
30A
Output Power
@4Ω/Ch
1800W
A
Designed & manufactured in the USA by:
Crest Audio Inc.
100 Eisenhower Dr.
Paramus, New Jersey 07652 USA
A
+
AB
A
XLR Pin +
B
B
A
2 3
B
A
GAIN
40x
Ø
20x
dBu
PUSH
A
PUSH
B
1
2
3
120V~60 Hz
HD 18
A
B
Crest Audio Inc.
100 Eisenhower Dr., Paramus NJ 07652 USA
TEL: 201.909.8700 FAX: 201.909.8744
http://www.crestaudio.com
Printed in USA
Loading...