Crest CRE57002SD User Manual
2.4GHz
CREST ELECTRONICS™
WWW.CREST-ELECTRONICS.NET
crestelectronics2@yahoo.com
CRE 57002SD / 57002SS RECEIVER WITH SOUND
INSIDE THE RECEIVER PACKAGE
CRE 57002SD *Generic Diesel Sound*
CRE 57002SS *Generic Steam Sound*
Non Plug N Play board
Auxiliary Wire Harness
Speaker Plug
Link Switch
201-565-6069
A –PLUG FOR SPEAKER Sound
B –LINK SWITCH
Non Plug –N- Play
Board
.
C –Auxiliary Wire
D – Chuff
Auxiliary Wire Speaker Plug
Link Switch
SOUND OPERATION
1of 2
2.4GHz
On The Transmitter Auxiliary Functions
Press – 1 for à Turn ON / Turn OFF Sound
Press – 2 for à Bell
Press – 3 for à Horn / whistle
Press – 7 for à High Volume
Press – 8 for à Medium Volume
Press – 9 for à Low Volume
Note: To turn On or Off the sound you have to select the latch function on the transmitter
under ‘AUX FUNC SETUP’. To turn On the Latch function, go to ‘AUX FUNC SETUP’ and
press the Stop/Enter button, highlight “F1” and press the Left arrow to select the LATCH
function.
When the locomotive comes to a full stop, the sound will idle for 30 seconds and then stop
working.
Reed Switch
Whistle
1
C
Chuff
2
CRE 57070 Reed Switch with magnet sold separately
White wire
Common
2of 2
Loading...