JOB:
ITEM NO:
ROAST-N-HOLD
GENTLE CONVECTION OVEN
MODEL CO-151-FUA-12B
FEA TURES AND BENEFITS:
Fully insulated Roast-N-Hold gentle convection oven designed •
for flavorful results by slow roasting.
Slow convected air system promotes natural browning for •
flavor and seals in natural juices. Slow roasting means 15% to
20% less shrinkage.
Full 8200 Watts of power allows for reheating of prepared •
meals or bulk items. Maximum temperature 350°F. (176.5°C.).
Pre-setting automatic controls for roasting and holding cycles •
allows for unattended operation 24 hours a day.
Roast and hold over 300 lbs. (136 kg.) of meat in just 7 sq. ft. •
of floor space.
Non-venting oven, permitted by most local codes, provides •
easy, inexpensive installation.
Self-contained power top lifts off for ease of maintenance; •
available to suit your power requirements.
Stainless steel construction throughout for ease of cleaning.•
Smooth interior coved corners prevent food particle/grease •
buildup.
Field reversible insulated doors prevent temperature loss. •
Silicone door gaskets for proper seal. High temperature
ceramic magnetic latches for "easy open" and security during
transport.
Safety conscious anti-microbial latches protect against •
spreading germs.Standard with right hand hinging; left hand
hinging available upon request.
Recessed push/pull handles on both sides prevent damage to •
walls; allows easy maneuvering.
Chrome plated wire universal angles accommodate a large •
variety of pan sizes on adjustable 1-1/2” spacing. Supplied
with 12 sets of angles and six raised wire grids.
Heavy duty 5” swivel casters, two with brakes. Provides •
mobility when fully loaded.
Free cooking manual and operation manual provided with the •
purchase of any Roast-N-Hold Oven.
POWER UNIT OPTIONS:
8200 Watts, 208 Volts, 1 Phase, 60 Hz.
8200 Watts, 240 Volts, 1 Phase, 60 Hz.
8200 Watts, 208 Volts, 3 Phase, 60 Hz.
8200 Watts, 240 Volts, 3 Phase, 60 Hz.
Probe Power Unit Available at Extra Cost (see page E-6)
™
CO-151-FUA-12B
®
SANITATION
NSF/ANSI 4
C US
ACCESSORIES and OPTIONS
(Available at extra cost):
Pass-Thru
Security Panel for Controls
Tempered Glass Door Windows
Key Lock Latches
Extra Wire Grids
Extra Universal Angles
Perimeter Bumper
Corner Bumpers
Floor Lock (for use with 5" casters)
Various Caster Options
See page E-10 for accessory details.
®
5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: 440/350-7267
www.crescor.com
Page E-1
Oct., 2008
CO-151-FUA-12B
5-1/16
4-1/2
14-1/2
B
A
A
DETAIL OF
PAN SLIDE
CRES COR
MODEL NO.
CO-151-FUA-12B
CAP/ANGLES
PAN DIM "A" DIM "B" DIM "C" INSIDE DIMENSIONS
SIZE WIDTH DEPTH HEIGHT WIDTH DEPTH HEIGHT
12
SETS
SEE NOTE
BELOW
IN 28-3/4 37-3/4 73-1/2 21-1/4 26-1/2 58 LBS 412
MM 730 960 1870 540 675 1475 KG 187
NOTE: Refer to Pan Size Chart at end of section.
ALL CONSTRUCTION IS RIVETED, WELDED AND FINISHED.
CABINET:
Body: 22 ga. stainless steel.•
Reinforcement: Internal framework of 16 ga. stainless steel.•
Insulation: Fiberglass, thermal conductivity (K factor) is .23 at •
75°F. 1-1/2” in back wall, doors, base; 2” in side walls.
Air tunnel: 20 ga. stainless steel, lift-out type, mounted on rear wall.•
Push/pull handles (2): 7” vertical; recessed. •
BASE:
One piece construction, .125 aluminum.•
Casters: 5” dia., swivel, modulus tires, 1-1/4 wide, load cap. •
250 lbs. each, temp. range -45°/+180°F. Delrin bearings. Front
casters equipped with brakes.
DUTCH DOORS:
Field reversible.•
Formed 22 ga. stainless steel.•
Latches: Anti-microbial chrome plated zinc with composite •
handle, ceramic magnetic type; mounted inboard.
Hinges: Heavy duty chrome plated zinc, lift-off type; mounted •
inboard.
Gaskets: Perimeter type, silicone.•
Pan stops: Embossed.•
PAN SLIDES:
Wire angles (.306 dia.), nickel chrome plated steel; mounted on •
lift-out posts.
12 sets of angles adjustable on 1-1/2” centers.•
Grids (6): Nickel chrome plated steel, raised wire 17” x 25”.•
POWER REQUIREMENTS AVAILABLE:
8200 Watts, 208 V olts, 60 Hz., 1 phase, 39 Amps., 50 Amp. service.•
8200 Watts, 240 V olts, 60 Hz., 1 phase, 34 Amps., 50 Amp. service.•
8200 Watts, 208 V olts, 60 Hz., 3 phase, 23 Amps., 30 Amp. service.•
8200 Watts, 240 V olts, 60 Hz., 3 phase, 20 Amps., 30 Amp. service•
B
C
69"
Roast-N-Hold
ON
OFF
POWER
( I )
( 0 )
6-50P
D
E
TM
FLASHING - TIMIMG
MINUTESHOURS
START
STOP
TIME SELECT
TIMER
G
F
160
190
130
0
7
80
220
100
60
160
180
PROOF
140
90
R
190
120
9
200
5
0
4
100
70
250 F
210
80
00
20
60
1
220
20
0
F
105
C
X
G
Y
Z
L15-30P
B
A
250
230
270
210
290
190
310
170
330
150
350 F
COOK / RETHERMHOLD
C
WEIGHT
POWER UNIT COMPONENTS: (refer to above drawing)
Body: Formed 20 ga. stainless steel with black control panel, •
recessed and tilted 7°.
A) Thermostat (holding): Solid state, 140°F. (60°C.) to 250°F. (121°C.).
B) Thermostat (cook/retherm): Solid state, 140°F. (60°C.) to
350°F. (176.5°C.).
C) Pilot lights (2).
D) Switch: Lighted ON-OFF rocker type.
E) Timer: 24 hr. digital countdown; infinite memory retention.
F) Thermometer.
Power cord: Permanent, 6 ft., 6/3 ga. with right angle plug.•
Heaters (3): 2670 Watts each.•
Blower motors (3).•
Vent fans (2).•
Fuses (2): 3 Amp.•
INSTALLATION REQUIREMENTS:
Check local vent hood codes for mobile Roast-N-Hold ovens.•
SHORT FORM SPECIFICA TIONS
Cres Cor Roast-N-Hold Convection Oven Model
CO-151-FUA-12B. Removable power unit 20 ga. stainless
steel, recessed control panel. Cabinet and Dutch doors 22
ga. stainless steel; stainless steel internal frame; coved
corner interior. Fiberglass insulation in sides 2”; back, doors
and base 1-1/2”. High temperature anti-microbial magnetic
latches. (12) sets universal angles for multiple pan sizes and
spacing. One piece base .125 aluminum. 5” swivel modulus
casters, Delrin bearings. Load capacity 250 lbs. each. 8200
Watts, Volts, 60 Hz., Phase. 2 year parts
warranty . Provide the following accessories: .
CSA-US, CSA-C, CSA to NSF4 listed.
ACT.
In line with its policy to continually improve its products,
5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: 440/350-7267
www.crescor.com
© Crescent Metal Products, Inc. 2008 All rights reserved. Litho in U.S.A.
CRES COR reserves the right to change materials and
specifi cations without notice.
Loading...