Cres Cor RO-151-HUA-9B User Manual

RETHERM

HEAT-N-HOLD

MODEL RO-151-HUA-9B (HALF SIZE)

FEA TURES AND BENEFITS:

Fully insulated half size Retherm Heat-N-Hold oven designed •
for both reconstituting precooked foods and slow roasting.

Slow convected air system promotes natural browning for •
flavor and seals in natural juices.

Efficient 4700 Watt power unit allows for rethermalization of •
prepared meals or bulk items. Maximum temperature 350˚F.
(176.5˚C.).

Pre-setting automatic controls for rethermalizing and holding •
cycles allows for unattended operation 24 hours a day.

Non-venting oven, permitted by most local codes, provides •
easy, inexpensive installation.

Self-contained power top lifts off for ease of maintenance; •
available to suit your power requirements.

Stainless steel construction throughout for ease of cleaning. •
Smooth interior coved corners prevent food particle/grease •

buildup.
Field reversible insulated door prevents temperature loss. •

Silicone door gasket for proper seal. High temperature
ceramic magnetic latch for “easy open” and security during
transport.

Safety conscious anti-microbial latch protects against •
spreading germs. Standard with right hand hinging; left hand
hinging available upon request.

Push/pull handle mounted on rear allows easy maneuvering.•
Chrome plated wire universal angels accommodate a large •

variety of pan sizes on adjustable 1-1/2" spacing. Supplied
with nine sets of angles.

Heavy duty 5" swivel casters, two with brakes. Provides •
mobility when fully loaded.

Ovens can be stacked for flexibility.•

POWER UNIT OPTIONS:

4700 Watts, 208 Volts, 1 Phase, 60 Hz.
4700 Watts, 240 Volts, 1 Phase, 60 Hz.
4700 Watts, 208 Volts, 3 Phase, 60 Hz.
4700 Watts, 240 Volts, 3 Phase, 60 Hz.
Probe Power Unit Available at Extra Cost (see page E-6)

JOB:
ITEM NO:

™

OVEN

RO-151-HUA-9B

-151-HUA-9B

®

SANITATION

NSF/ANSI 4

C US

®

ACCESSORIES and OPTIONS
(Available at extra cost):

 Stacking Kit
 Security Panel for Controls
 Tempered Glass Door Window
 Key Lock Latch
 Extra Universal Angles
 Perimeter Bumper
 Corner Bumpers
 Floor Lock (for use with 5" casters)
 Various Caster Options

See page E-10 for accessory details.

5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: [phone]

www.crescor.com

Page E-4.3

Oct., 2008

RO-151-HUA-9B

5-1/16

14-1/2

A

A

3"

B

DETAIL OF

PAN SLIDE

CRES COR

MODEL NO.

RO-151-HUA-9B

CAP/ANGLES

SETS

PAN DIM "A" DIM "B" DIM "C" INSIDE DIMENSIONS

SIZE WIDTH DEPTH HEIGHT WIDTH DEPTH HEIGHT

9

SEE NOTE

BELOW

IN 28-3/4 37-3/4 43-3/4 21-1/4 26-1/2 28 LBS 260

MM 730 960 1115 540 675 715 KG 118

Note: Refer to pan size chart at end of section.
ALL CONSTRUCTION IS RIVETED, WELDED AND FINISHED.

CABINET:

Body: 22 ga. stainless steel.•
Reinforcement: Internal framework of 16 ga. stainless steel.•
Insulation: Fiberglass, thermal conductivity (K factor) is .23 at •
75˚F. 1-1/2" in back wall, door, base; 2" in side walls.
Air tunnel: 20 ga. stainless steel, lift-out type, mounted on rear •
wall.
Work Top: 18 ga., stainless steel.•

BASE:

One piece construction, .125 aluminum.•
Casters: 5" dia., swivel, modulus tires, 1-1/4 wide, load cap. •
250 lbs. each, temp. range -45˚/+180˚F. Delrin bearings. Front
casters equipped with brakes.

DOOR:

Field reversible.•
Formed 22 ga. stainless steel.•
Latch: Anti-microbial chrome plated zinc with composite handle, •
ceramic magnetic type; mounted inboard.
Hinges: Heavy duty chrome plated zinc, lift-off type; mounted •
inboard.
Gasket: Perimeter type, silicone.•
Pan stop: Embossed.•

PAN SLIDES:

Wire angles (.306 dia.), nickel chrome plated; mounted on lift-out •
posts.
(9) sets of angles adjustable on 1-1/2" centers.•

POWER REQUIREMENTS AVAILABLE:

4700 Watts, 208 V olts, 60 Hz., 1 phase, 24 Amps., 30 Amp. service.•
4700 Watts, 240 V olts, 60 Hz., 1 phase, 20 Amps., 30 Amp. service.•
4700 Watts, 208 V olts, 60 Hz., 3 phase, 13 Amps., 20 Amp. service.•
4700 Watts, 240 V olts, 60 Hz., 3 phase, 12 Amps., 20 Amp. service•

B

250

230

270

210

290

190

310

170

330

150

350 F

Roast-N-Hold

ON

OFF

POWER

D

TM

FLASHING - TIMIMG

( I )

MINUTESHOURS

START

( 0 )

STOP

TIME SELECT

TIMER

B

40"

C

F A

E

160

190

130

70

80

220

100

60

160

180

PROOF

140

90

190

120

95

200

40

100

70

250 F

210

80

20

60

100

220

20

0

F

105

C

HOLD COOK / RETHERM

C

G

6-30P

YXG

Z

L15-20P

WEIGHT

ACT.

POWER UNIT COMPONENTS: (refer to above drawing)

Body: Formed 20 ga. stainless steel with black control panel, •

recessed and tilted 7˚.
A) Thermostat (holding): Solid state, 140˚F. (60°C.) to 250°F. (121°C.).
B) Thermostat (cook/retherm): Solid state, 140°F. (60°C.) to

350˚F. (176.5˚C.).
C) Pilot lights (2).
D) Switch: Lighted ON-OFF rocker type.
E) Timer: 24 hr. digital countdown; infinite memory retention.
F) Thermometer.

Power cord: Permanent, 6 ft., 10/3 ga. with right angle plug.•
Heaters (3): 1470 Watts each.•
Blower motors (3).•
Vent fans (2).•
Fuses (2): 3 Amp.•

INSTALLATION REQUIREMENTS:

Check local vent hood codes for mobile Roast-N-Hold ovens.•

SHORT FORM SPECIFICA TIONS

Cres Cor Retherm Heat-N-Hold Half Size Oven Model
RO-151-HUA-9B. Removable power unit 20 ga. stainless
steel, recessed control panel. Cabinet and door 22 ga.
stainless steel; stainless steel internal frame; coved
corner interior. Fiberglass insulation in sides 2”; back,
door and base 1-1/2”. High temperature anti-microbial
magnetic latch. (9) sets universal angles for multiple pan
sizes and spacing. One piece base .125 aluminum. 5"
swivel modulus casters, Delrin bearings. Load capacity
250 lbs. each. 4700 Watts, Volts, 60 Hz.,
Phase. 2 year parts warranty . Provide the following
accessories: . CSA-US, CSA-C, CSA to
NSF4 listed.

In line with its policy to continually improve its products,

5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: [phone]

www.crescor.com

© Crescent Metal Products, Inc. 2008 All rights reserved. Litho in U.S.A.

CRES COR reserves the right to change materials and
specifi cations without notice.