QUIKTHERM™ 12 KW RETHERM OVEN
MODEL RO-151-FW-UA-18D
FEATURES AND BENEFITS:
• Roast, cook, bake, rethermalize and hold with precise
temperature and humidity control. Power boosting switch allows
end user flexibility to increase or reduce air flow.
• Moist heat, dry heat or a combination of both allows for a variety
of food preparation and holding.
• Full 12,000 Watts of power allows for rethermalization of prepared
meals or bulk items. Maximum temperature 350˚F. (176.5˚C.).
• 2000 Watt water heater with separate control and low water
indicator.
• Standard with automatic water fill system and low water indicator.
LED and water heater shut off when water at critically low level.
• Standard solid state electronic control with large, clean, easyto-read and operate LED digital display to ensure holding at
precise food temperatures and moisture content.
• 18 factory or field programmed retherm & hold cycles.
Each programmed menu can be customized for exact time,
temperature and humidity needs.
• AquaTemp system maintains optimum food texture through
continuous monitoring of both temperature and humidity.
Temperature and humidity values are measured, displayed and
controlled through intuitive solid state controller. Air temperature
is prioritized over humidity to ensure food safety.
• Standard with probe cooking, includes one 1-1/2" food
temperature probe.
• Non-venting oven, permitted by most local codes, provides easy,
inexpensive installation.
• Stainless steel construction and smooth interior coved corners for
ease of cleaning and prevent food particle/grease buildup.
• Field reversible insulated Dutch doors prevent temperature loss.
Silicone door gaskets for proper seal. High temperature ceramic
magnetic latches for “easy open” and security during transport.
• Safety conscious anti-microbial latches protect against spreading
germs. Standard with right hand hinging; left hand hinging
available upon request.
• Non-corrosive stainless steel wire universal angles accommodate
a large variety of pan sizes on adjustable 1-1/2" spacing.
Supplied with 18 sets of angles.
• Integral drip trough on front keeps traffic area dry, safer.
• Heavy duty 5" swivel casters, two with brakes. Provides mobility
when fully loaded.
JOB:
ITEM NO:
RO-151-FW-UA-18D
ACCESSORIES and OPTIONS
(Available at extra cost):
q 6" Food Temperature Probe
q Security Panel for Controls
q Tempered Glass Door Windows
q Key Lock Latches
q Extra Universal Angles
q Side and Rear Bumpers
q HAACP Documentation (built in USB port)
See page E-10 for accessory details.
POWER UNIT OPTIONS:
12,000 Watts, 208 Volts, 3 Phase, 60 Hz.
12,000 Watts, 240 Volts, 3 Phase, 60 Hz.
5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: 440/350-7267
www.crescor.com
Page E-4.6
Apr., 2013
5-1/8
DETAIL OF
PAN SLIDE
4-1/2
9"
RO-151-FW-UA-18D
A
B
A
ON
OFF
C
B
G
Z
X
70"
Y
15-50P
CRES COR
MODEL NO.
ANGLES
RO-151-FW-UA-18D
NOTES: 1. Pan sizes 22" x 20" (560 x 510) Roast & Bake Pans, 10" x 20" (255 x 510) Roast & Bake Pans, 18" x 26" (460 x 660)
ALL CONSTRUCTION IS RIVETED, WELDED AND FINISHED.
Bun Pans, 14" x 18" (355 x 460) Service Trays, 12" x 20" (305 x 510) Steam Table Pans.
Refer to Pan Size Chart at end of section.
2. When ordering bumpers, add 2" to overall dimensions.
CABINET:
• Body: 22 ga. stainless steel.
• Reinforcement: Internal framework of 18 ga. stainless steel.
• Insulation: Fiberglass, thermal conductivity (K factor) is .23 at
75˚F. 1-1/2" in doors, top, base; 2" in sidewalls.
• Air tunnels: 22 ga. stainless steel; lift-out type, mounted on sides.
• Interior coved corners.
• Automatic water ll hook-up under rear of base.
PAN DIM "A" DIM "B" DIM "C" INSIDE DIMENSIONS
CAP/
18
SETS
SIZE WIDTH DEPTH HEIGHT WIDTH DEPTH HEIGHT
SEE NOTE
BELOW
IN 28-3/4 37-3/4 73-11/16 21-3/4 26-7/8 58 LBS 392
MM 730 960 1875 555 685 1475 KG 178
PAN SLIDES:
• Stainless steel wire universal angles (.306 dia.), mounted on
lift-out posts.
18 sets of angles; adjustable on 1-1/2" centers. HOT UNIT
COMPONENTS:
• Thermostat (retherm/hold): Solid state digital control, 140°F to
350˚F (176.5˚C).
• Thermostat (humidity): Solid state digital control, room ambient to 95%.
BASE:
• One piece construction, .125 aluminum.
• Drip trough: Formed 18 ga. stainless steel mounted to front of
cabinet; removable drip pan.
• Casters: 5" dia., swivel, modulus tires, 1-1/4 wide, load cap.
250 lbs. each, temp. range -45˚/+180˚F. Delrin bearings. Front
casters equipped with brakes.
DUTCH DOORS:
• Field reversible.
• Formed 22 ga. stainless steel.
• Latches: Chrome plated steel, high temperature ceramic
magnetic type.
• Switch: ON-OFF push button type.
• Power cord: Permanent, 10 ft., 12/3 ga. with 15-50 plug.
• Heaters: 2000 Watts each.
• Switch: (1) Air volume.
• Blower motors: (6).
• Vent fans: (2).
• Water pan: 4 gallons; 16 ga. 304 stainless steel with 1850 Watt
heater for humidity.
• Fuses: (2) 6 Amp.
• Probe: (1) 1-1/2", stainless steel.
INSTALLATION REQUIREMENTS:
• Check local vent hood codes for mobile Roast-N-Hold ovens.
• Hinges: Heavy duty chrome plated steel.
• Gaskets: Perimeter type, silicone.
• Pan stops: Embossed.
POWER REQUIREMENTS AVAILABLE:
• 12,000 Watts, 208 Volts, 60 Hz., 3 phase, 50 Amp. service.
• 12,000 Watts, 240 Volts, 60 Hz., 3 phase, 50 Amp. service
Cres Cor QuikTherm™ AquaTemp Retherm Oven Model
RO-151-FW-UA-18D. 20 ga. stainless steel, recessed control
panel. Cabinet 22 ga. stainless steel. Stainless steel internal
frame; coved corner interior. 16 ga. stainless steel 4 gallon
SHORT FORM SPECIFICATIONS
water reservoir with automatic water ll hook-up. Fiberglass
insulation in sides 2”; back, doors and base 1-1/2”. 22 ga.
stainless steel door, high temperature anti-microbial magnetic
Scan QR code to view Spec Sheet,
Operating Manual, Wiring Diagram
or to call Customer Service.
If you need a QR reader visit your App
Store on your Smartphone or Tablet.
latches, heavy duty hinges. (18) sets universal angles
for multiple pan sizes and spacing. One piece base .125
aluminum. 5" swivel modulus casters, Delrin bearings. Load
capacity 250 lbs. each. 12,000 Watts, ______ Volts, 60 Hz.,
3 Phase. 2-Year Parts / 1-Year Labor warranty. Provide the
following accessories:____ _____ _____ .
WEIGHT
ACT.
In line with its policy to continually improve its products,
5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: 440/350-7267
www.crescor.com
© Crescent Metal Products, Inc. 2013 All rights reserved. Litho in U.S.A.
CRES COR reserves the right to change materials and
specications without notice.
Loading...