PASS-THRU QUIKTHERM™ 12 KW RETHERM OVEN
TM
MODEL RO-151-FPW-UA-18D SERIES
FEATURES AND BENEFITS:
• Roast, cook, bake, rethermalize and hold with precise
temperature and humidity control. Power boosting switch allows
end user flexibility to increase or reduce air flow.
• Moist heat, dry heat or a combination of both allows for a variety
of food preparation and holding.
• Full 8,000 or 12,000 Watts of power allows for rethermalization
of prepared meals or bulk items. Maximum temperature 350˚F.
(176.5˚C.).
• 1850 Watt water heater with separate control and low water
indicator.
• Standard with automatic water fill system and low water indicator.
LED and water heater shut off when water is at critically low level.
• Standard solid state electronic control with large, clean, easyto-read and operate LED digital display to ensure holding at
precise food temperatures and moisture content.
• AquaTemp system maintains optimum food texture through
continuous monitoring of both temperature and humidity.
Temperature and humidity values are measured, displayed and
controlled through intuitive solid state controller. Air temperature
is prioritized over humidity to ensure food safety.
• Non-venting oven, permitted by most local codes, provides easy,
inexpensive installation.
• Stainless steel construction and smooth interior coved corners for
ease of cleaning and to prevent food particle/grease buildup.
• Field reversible insulated Dutch doors prevent temperature loss.
Silicone door gaskets for proper seal. High temperature ceramic
magnetic latches for “easy open” and security during transport.
• Safety conscious anti-microbial latches protect against spreading
germs. Standard with right hand hinging; left hand hinging
available upon request.
• Non-corrosive stainless steel wire universal angles accommodate
a large variety of pan sizes on adjustable 1-1/2" spacing.
Supplied with 18 sets of angles.
• Integral drip trough keeps traffic area dry, safer.
• Heavy duty 5" swivel casters, two with brakes. Provides mobility
when fully loaded.
POWER UNIT OPTIONS:
8000 Watts, 208 Volts, 1 or 3 Phase, 60 Hz.
8000 Watts, 240 Volts, 1 or 3 Phase 60 Hz.
12,000 Watts, 208 Volts, 3 Phase, 60 Hz.
12,000 Watts, 240 Volts, 3 Phase, 60 Hz.
12,000 Watts, 480 Volts, 3 Phase, 60 Hz.
Deluxe Models (-DX) have 18 factory or eld programmed cook
& hold cycles. Each programmed menu can be customized for
exact time and temperature needs. Probe cooking includes one
3" food temperature probe and port.
JOB:
ITEM NO:
®
C US
RO-151-FPW-UA-18DE
Standard (-DE) Deluxe (-DX)
All Ovens come standard
with easy-to-read and
operate LED digital controls.
Deluxe Controls are available
with 18 programmable menus
and 3" food probe.
ACCESSORIES and OPTIONS
(Available at extra cost):
q Deluxe version with 18 programmable menus
and 3" food probe (or optional 6" meat probe).
q Security Panel for Controls
q Key Lock Latches
q Extra Universal Angles
q Side Bumpers
q HACCP Documentation (built in USB port)
See page E-10 for accessory details.
5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: 440/350-7267
www.crescor.com
Page E-4.7
Jan., 2015
5-1/8
Z
Y
X
G
G
Y
6-50P
L15-30P
Z
G
X
15-50P
G
X
Z
Y
ADJ. ON
1-1/2" CTRS.
DETAIL OF
PAN SLIDE
"5"
3"
"B"
"A"
RO-151-FPW-UA-18D SERIES
G
G
Z
Z
X
X
Y
Y
15-50P
G
"C"
6-50P
X
G
Y
Z
L15-30P
L16-30P (480V)
CRES COR
MODEL NO.
RO-151-FPW-UA-18DE
RO-151-FPW-UA-18DX
ANGLES
PAN DIM "A" DIM "B" DIM "C" INSIDE DIMENSIONS
CAP/
18
SETS
SIZE WIDTH DEPTH HEIGHT WIDTH DEPTH HEIGHT
SEE NOTE
BELOW
IN 28-1/4 34-1/2 73-11/16 21-3/4 26-7/8 58 LBS 392
MM 720 880 1875 555 685 1475 KG 178
(-DE) models are standard models, (-DX) are upgraded deluxe models. See accessory sheet E-10 for more information.
NOTES: 1. Pan sizes 22" x 20" (560 x 510) Roast & Bake Pans, 10" x 20" (255 x 510) Roast & Bake Pans, 18" x 26" (460 x 660)
Bun Pans, 14" x 18" (355 x 460) Service Trays, 12" x 20" (305 x 510) Steam Table Pans. Refer to Pan Size Chart at end of section.
2. When ordering bumpers, add 2" to overall dimensions.
CABINET:
• Body: 22 ga. stainless steel.
• Reinforcement: Internal framework of 18 ga. stainless steel.
• Insulation: Fiberglass, thermal conductivity (K factor) is .23 at
75˚F. 1-1/2" in doors, top, base; 2" in sidewalls.
• Water pan: 4 gallons; 16 ga. stainless steel with 1850 Watt heater for
humidity.
• Air tunnels: 22 ga. stainless steel; mounted on sides.
• Interior coved corners.
• Automatic water ll hook-up under base.
BASE:
• One piece construction, .125 aluminum.
• Drip trough: Formed 18 ga. stainless steel mounted to front and
rear of cabinet; removable drip pans.
• Casters: 5" dia., swivel, modulus tires, 1-1/4 wide, load cap.
250 lbs. each, temp. range -45˚/+180˚F. Delrin bearings. Front
casters equipped with brakes.
DUTCH DOORS:
• Field reversible.
• Formed 22 ga. stainless steel.
• Latches: Chrome plated steel, high temperature ceramic
magnetic type.
• Hinges: Heavy duty chrome plated steel.
• Gaskets: Perimeter type, silicone.
• Pan stops: Embossed.
PAN SLIDES:
• Stainless steel wire universal angles (.306 dia.), mounted on
lift-out posts.
• 18 sets of angles; adjustable on 1-1/2" centers.
POWER REQUIREMENTS AVAILABLE:
• 8000 Watts, 208 Volts, 60 Hz., 1 Phase, 50 Amp. service.
• 8000 Watts, 240 Volts, 60 Hz., 1 Phase, 50 Amp. service.
• 8000 Watts, 208 Volts, 60 Hz., 3 Phase, 30 Amp. service.
• 8000 Watts, 240 Volts, 60 Hz., 3 Phase, 30 Amp. service.
• 12,000 Watts, 208 Volts, 60 Hz., 3 phase, 50 Amp. service.
• 12,000 Watts, 240 Volts, 60 Hz., 3 phase, 50 Amp. service.
• 12,000 Watts, 480 Volts, 60 Hz., 3 phase, 30 Amp. service.
ELECTRICAL COMPONENTS:
• Thermostat (retherm/hold): Solid state digital control, 140°F to
350˚F (176.5˚C).
• Thermostat (humidity): Solid state digital control, room ambient to 95%.
• Switch: ON-OFF push button type.
• Power cord: Permanent, 8 ft., with:
- Straight blade plug for 50A., 3Ph.
- Twistlock plug for 30A., 3Ph.
- Right angle straight blade plug for 50A., 1Ph.
• Heaters (6): 2000 Watts each for 12KW; 1325 Watts each for 8KW.
• Switch: (1) Air volume.
• Blower motors: (4 or 6).
• Vent fans: (3).
• Water heater: 1850 Watts.
• Fuses: (2) 6 Amp.
INSTALLATION REQUIREMENTS:
• This model complies with section 59 of UL710B for emissions
of grease laden air, and according to UL is not required to be
placed under a ventilation hood. Check local requirements
before installation.
SHORT FORM SPECIFICATIONS
Cres Cor QuikTherm™ AquaTemp Retherm Oven
Model RO-151-FPW-UA-18D__. 18 ga. stainless steel,
recessed control panel with digital thermostat. Cabinet
22 ga. stainless steel. Stainless steel internal frame;
coved corner interior. 16 ga. stainless steel 4 gallon water
reservoir with automatic water ll hook-up. Fiberglass
insulation in sides 2”; back, doors and base 1-1/2”. 22
ga. stainless steel door, high temperature anti-microbial
magnetic latches, heavy duty hinges. (18) sets universal
angles for multiple pan sizes and spacing. One piece
base .125 aluminum. 5" swivel modulus casters, Delrin
bearings. Load capacity 250 lbs. each. _______ Watts,
______ Volts, 60 Hz., ___ Phase. 2-Year Parts / 1-Year
Labor warranty. Provide the following accessories: ____
_____ _____ . CSA-US, CSA-C, CSA to NSF4 listed.
WEIGHT
ACT.
In line with its policy to continually improve its products,
5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: 440/350-7267
www.crescor.com
© Crescent Metal Products, Inc. 2015 All rights reserved. Litho in U.S.A.
CRES COR reserves the right to change materials and
specications without notice.
Loading...