Cres Cor RH-1332W-D User Manual
INSULATED STAINLESS STEEL
C US
®
AQUATEMP™ ROLL-IN HOT CABINET WITH RACK
MODEL RH-1332W-D
FEATURES AND BENEFITS:
• Roll-In-Rack designed for moving school
pre-packed meals in baskets from prep area,
central kitchen, commissary, cooler, oven then
hold until ready to serve.
• Fully insulated Roll-In Hot Cabinet designed
for holding school pre-packed meals at safe
serving temperatures.
• Powerful, yet efcient, 3000 Watt heating
system maintains the right combination of heat
and humidity to properly hold products.
• AquaTemp system maintains optimum food
texture through continuous monitoring of both
temperature and humidity. Temperature and
humidity values are measured, displayed and
controlled through intuitive solid state controller.
Air temperature is prioritized over humidity to
ensure food safety. Low water indicating LED
and water heater shut off when water is at
critically low level.
• All welded stainless steel construction
throughout for ease of cleaning.
• High temperature ceramic magnetic latch
for "easy open”; twist-lock catch keeps door
securely closed.
• Capacity: 32 school baskets, 13" x 26".
JOB:
ITEM NO:
®
SANITATION
NSF/ANSI 4
RH-1332W-D
New, easier to use, easy-to-read and operate
LED digital display ensures holding at precise
food temperatures and moisture content.
ACCESSORIES and OPTIONS
(Available at extra cost):
q Security Panel for Controls
q Key Lock Latch
q Wire Baskets
q Extra Roll-In Rack
See page B-30 for accessory details.
5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: 440/350-7267
www.crescor.com
Page B-22.1
TM
Jan., 2017
3.00
Scan QR code to view Spec Sheet,
Operating Manual, Wiring Diagram or
to call Cres Cor
®
Customer Service.
If you need a QR reader, visit your
App Store on your Smartphone or
Tablet.
8400-109
Model
RH-1332-WD
A
RH-1332W-D
B
C
DETAIL OF
3"
PAN SLIDE
10.190
CRES COR
MODEL NO.
CAPACITY / SIZE
RH-1332W-D 1 RACK
ROR-201-SBS-1332-D
INSIDE RACK WIDTH DIMENSION IS FOR ONE SIDE.
32
BASKETS
13 X 26 IN 35-5/8 30-1/4 65-1/2 13-5/8 26 49-1/2 LBS 131
330 X 660 MM 905 768 1663 346 660 1257 KG 59
DIM "A" DIM "B" DIM "C" INSIDE DIMENSIONS
WIDTH DEPTH HEIGHT WIDTH DEPTH HEIGHT
IN 39 33-7/8 77-5/8 32-1/8
MM 991 860 1972 816 721 1429 KG 178
CABINET:
• Body: 22 ga. stainless steel.
• Inner liner: Formed 22 ga. stainless steel.
• Reinforcement: Internal framework of 14 ga. stainless steel
channels, welded.
• Insulation: Fiberglass, thermal conductivity (K factor) is .23 at
75˚F. 1-1/2" in back wall, door, base; 2" in side walls.
• Air tunnels: 20 ga. stainless steel, lift-out type, mounted on inner sides.
• Water Pan: 4 gallons; 16 ga. stainless steel with 1850 Watt
heater for humidity.
BASE:
• One piece construction, .190 aluminum.
• Legs: Heavy duty polished stainless steel 2" O.D. adjustable for
leveling oven.
DOOR:
• Field reversible.
• Formed 22 ga. stainless steel.
• Latch: Chrome plated high pressure die cast zinc, composite
handle, ceramic magnetic.
• Hinges: Heavy duty chrome plated die cast zinc, mounted inboard.
• Door Gasket: Perimeter type, silicone.
POWER REQUIREMENTS AVAILABLE:
• 3000 Watts, 208 Volts, 1 Phase, 60 Hz., 20 Amp.Service
Scan QR code to view Spec Sheet,
Operating Manual, Wiring Diagram
or to call Customer Service.
If you need a QR reader visit your App
Store on your Smartphone or Tablet.
A
B
G
REMOVABLE
HANDLE
C
6-20P
WEIGHT
ACT.
28-3/8
56-1/4 LBS 392
HOT UNIT COMPONENTS:
• Thermostat (holding): Solid state digital display control, room
ambient to 200˚F (93˚C).
• Thermostat (humidity): Solid state digital display control, room
ambient to 95%.
• Switch: ON-OFF push button type.
• Power cord: Permanent, 10 ft., 12/3 ga.
• Heater: 3000 Watts for holding.
• Blower motor.
• Vent fan.
• Thermometer: Digital.
ROLL-IN RACK (ROR-201-SBS-1332-D):
• Angles (16 sets): Formed, permanently attached, spaced on 3" centers.
• 5" dia. swivel, modulus tires, 1-1/4" wide, load cap. 250 lbs.
each, temp. range -45˚/+180˚F. Delrin bearings. Two casters
equipped with brakes.
• Capacity: 2 baskets side-by-side, 16 baskets high, 32 baskets
total, 320 meals total.
SHORT FORM SPECIFICATIONS
Cres Cor Roll-In AquaTemp™ Hot Cabinet Model
RH-1332W-D. 18 ga. stainless steel, recessed control
panel. Cabinet and Dutch doors 22 ga. stainless steel;
stainless steel internal frame; coved corner interior.
Fiberglass insulation in sides 2”; back, doors and
base 1-1/2”. High temperature anti-microbial magnetic
latches. One piece base .190 aluminum. 2" dia.
stainless steel legs. Includes Cres Cor Roll-In Rack
Model ROR-201-SBS-1332-D: 16 angles on 3" centers;
holds 32 baskets. 5" swivel modulus casters, Delrin
bearings. Load capacity 250 lbs. each, temperature
-45 to +180°F. 120 Volts, 60 Hz., 1 Phase. 2 year parts
warranty. Provide the following accessories: ____ ____
____ . CSA-US, CSA-C, CSA to NSF4 listed.
5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: 440/350-7267
www.crescor.com
© Crescent Metal Products, Inc. 2017 All rights reserved. Made in America Since 1936
In line with its policy to continually improve its products,
CRES COR reserves the right to change materials and
specications without notice.
Loading...