Cres Cor R-171-SUA-10Z User Manual

JOB:

C US

®

ITEM NO:

INSULATED CHILLTEMP

CORRECTIONAL REFRIGERATED CABINET

MODEL R-171-SUA-10E-Z

FEATURES AND BENEFITS:

• Fully insulated mobile ChillTemp® refrigerated
cabinet for holding food and beverages at serving
temperature.

• Forced air system provides even distribution of
cold air; cabinet maintains temperatures from

33˚F (.5˚ C) to 40˚F (4.5˚ C). Automatically

defrosts.

• 1/3 horsepower compressor with automatic

overload reset. R134a refrigerant for

environmental compatibility.

• Stainless steel and locking Lexan security panel
protects controls.

• Stainless steel construction throughout for ease
of cleaning. One piece extended base protects
cabinet body.

®

R-171-SUA-10E-Z

• Recessed push/pull handles on both sides
prevent damage to walls; allows easy
maneuvering.

• Insulated door with key lock latches prevent
temperature loss. Magnetic door gaskets for
proper seal.

• Standard with right hand hinging; left hand

hinging available upon request. Door swings 270°

on 11 ga. stainless steel hinges.

• Generous 18-cubic foot interior.

• Ten sets of stainless steel universal angles
riveted to posts to accommodate 18 x 26" or

12 x 20" pans.

• Heavy duty 6" swivel casters, two with brakes.
Provides mobility when fully loaded.

®

SANITATION

NSF/ANSI 4

ACCESSORIES and OPTIONS
(Available at extra cost):

q Corner Bumpers

q Polyurethane Casters

q 240 Volt Service

q Digital Thermometer

q Interior for (28) 18" x 26" pans

See page K-2 for accessory details.

5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: [phone]

www.crescor.com

Page CM-K-1

Dec., 2016

R-171-SUA-10-Z

A

A

B

W

G

5-15P

C

B

70"

9"

3-1/2"

6"

4-1/2

B

DETAIL OF
PAN SLIDE

CRES COR

MODEL NO.

R-171-SUA-10Z

ANGLES

PAN DIM "A" DIM "B" DIM "C" INSIDE DIMENSIONS

CAP/

10 18 X 26

20 12 X 20

SIZE WIDTH DEPTH HEIGHT WIDTH DEPTH HEIGHT

IN 28-3/4 34 73-3/8 22 27-1/2 46-3/4 LBS 350

MM 730 865 1865 560 700 1190 KG 159

NOTES: 1. When ordering bumpers, add 2" to overall dimensions.

ALL EXPOSED FASTENERS ARE TAMPER PROOF.

BAA

C

71"

G

W

5-15P

WEIGHT

ACT.

CABINET:

• Body: 22 ga. stainless steel.

• Reinforcement: Internal framework of 16 ga. stainless steel.

• Insulation: Fiberglass, thermal conductivity (K factor) is .23 at

75˚F. 1-1/2" in doors, base, top; 2" in sidewalls.

• Push/pull handles (2): 5” vertical; recessed.

• Interior coved corners.

BASE:

• One piece construction, .125 aluminum.

• Casters: 5" dia., swivel, modulus tires, 1-1/4 wide, load cap.

250 lbs. each, temp. range -45˚/+180˚F. Delrin bearings. Front

casters equipped with brakes.

DOOR:

• Field reversible.

• Formed 22 ga. stainless steel.

• Latch: Chrome plated zinc; magnetic type with key lock handles.

• Hinges: 11 ga. stainless steel.

• Gasket: Perimeter type, magnetic Santoprene.

• Pan stop: Embossed.

PAN SLIDES:

• 16 ga. stainless steel universal angles riveted to posts on 4-1/2"

centers.

• Removable with tools.

ELECTRICAL COMPONENTS:

• Security Panel: 18 ga. stainless steel with 3/16" polycarbonate

window and key lock.

• Digital Thermostat: Pre-set to 38˚F (3.3˚C).

• Pilot light.

• Power switch.

• Power cord: Permanent, 10 ft., 14/3 ga. with molded plug.

• Compressor: 1/3 h.p.

• Condensate evaporator: Electrical.

• R134a refrigerant.

POWER REQUIREMENTS:

• 120 Volts, 60 Hz., single phase, 15 Amp. service.

SHORT FORM SPECIFICATIONS

Cres Cor Correctional Refrigerated Cabinet Model

R-171-SUA-10E-Z. Cabinet 22 ga. stainless steel;
stainless steel internal frame. (10) sets of stainless steel

universal angles for multiple pan sizes on 4-1/2" centers.
Field reversible door, 22 ga. stainless steel. All exposed
fasteners are tamper proof. Fiberglass insulation in sides
2"; doors, base, top 1-1/2". Interior coved corners. 1/3

h.p. compressor, 120 Volts. One piece insulated base,
.125 aluminum. 5" swivel casters, Delrin bearings. Load
capacity 250 lbs. each. 1-Year Parts / 90-Day Labor

warranty. Provide the following accessories: ______

______ ______. CSA-US/C, CSA to NSF7 listed.

In line with its policy to continually improve its products,

5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: [phone]

www.crescor.com

© Crescent Metal Products, Inc. 2016 All rights reserved. Litho in U.S.A.

CRES COR reserves the right to change materials and

specications without notice.