Cres Cor HJ-531-10-240 User Manual

HEATED DISH DOLLY

MODEL HJ-531-10-240

FEATURES AND BENEFITS:

• Heated dish dolly for preheating plates and
meal delivery pellets prior to serving.

• Can be used for hot meal transport/delivery.
Capacity 24 covered plated meals.

• Fits conveniently under standard 36" counters
(height 32").

JOB:

ITEM NO:

• Removable hinged top, front, and rear doors for
easy access and cleaning.

• Equipped with 1000 Watt, 120 Volt heating
element and lifetime lubricated blower motor.

Provides quick heat up to 180˚F (82˚C).

• Recessed panel protects controls.

• Standard 6' twist-lock cord set.

• Base constructed of one piece, non-corrosive,
Hi-Tensile aluminum with cross brace
reinforcement for added strength.

• Heavy duty 5" swivel casters, two with brakes.

• Provides mobility when fully loaded.

HJ-531-10-240

®

SANITATION

NSF/ANSI 4

ACCESSORIES and OPTIONS
(Available at extra cost):

q Cord Wrap

q Perimeter Bumper

q Corner Bumpers

q 240 Volt Service

See page H-9 for accessory details.

C US

®

5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: [phone]

www.crescor.com

Page H-5

Nov., 2013

HJ-531-10-240

B

A

A

11-1/2

C

CRES COR

MODEL NO.

HJ-531-10-240

*Capacity shown is approximate; each compartment holds 20" (510 mm) stack of dishes.

ALL ALUMINUM CONSTRUCTION.

*PLATE

CAP.

240 9-7/8 - 11 255 - 280 23 585 23 585 32 815 75 34

DOLLY:

• Base and louvered center partition: .100 aluminum.

• Center partition cover: .063 aluminum.

• Reinforcement: Formed .190 “X-frame” mounted to base.

• Corner posts: Extruded closed channels with air duct
vents.

DISH SIZE DIA. DIM "A" WIDTH DIM "B" DEPTH DIM "C" HEIGHT WEIGHT ACT.

INCHES MM INCHES MM INCHES MM INCHES MM LBS KG

ELECTRICAL COMPONENTS:

• Removable power cord: 6 ft., 14/3 ga. with molded plug.

• Heater: Incoloy sheath, 925 Watts.

• Thermostat: Electro-mechanical, room ambient to 180˚F

(82˚C).

• Blower motor.

• Caster posts: Reinforced tubular extrusions.

POWER REQUIREMENTS:

• Casters: 5" dia., swivel, modulus tires, 1-1/4 wide, load

cap. 250 lbs. each, temp. range -45˚/+180˚F. Delrin

bearings. Two casters equipped with brakes.

• 1000 Watts, 120 Volts, 60 Hz., single phase, 8.3 Amps.,
15 Amp. service.

B

G

W

5-15P

9

TOP COVER:

• Panels: .100 aluminum connected with continuous hinge.

• Handles: .100 aluminum, riveted to two ends of cover.

• Removable; rests on four nesting pins riveted to sides.

DOUBLE DOORS:

• .100 aluminum.

• Latches: Zinc plated steel draw latch.

• Hinges: Nickel chrome plated steel, lift-off type.

Cres Cor Heated Dish Dolly Model HJ-531-10-240
with .100 aluminum base and center post. Base
reinforced with .190 aluminum “X” bracing. Body and
doors constructed of .100 aluminum. 1000 Watt heater,
blower motor, 120 Volts. Capacity of 240 plates 9-7/8"
to 11" dia. Five inch swivel modulus casters have

Delrin bearings. Load capacity 250 lbs. each. 2-Year
Parts / 1-Year Labor warranty. Provide the following

accessories: . CSA-US, CSA-C,
CSA Sanitation.

5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: [phone]

www.crescor.com

© Crescent Metal Products, Inc. 2011 All rights reserved. Litho in U.S.A.

SHORT FORM SPECIFICATIONS

In line with its policy to continually improve its products,
CRES COR reserves the right to change materials and

specications without notice.