Cres Cor H-339-12-135C User Manual

INSULATED COUNTER TOP

HOT CABINET

MODEL H-339-12-135C

(FOR 12" X 20" OR 13" X 18" PANS)

FEATURES AND BENEFITS:

• Fully insulated counter top hot cabinet keeps
prepared foods at serving temperatures. Ideal
for under counter use also.

• Powerful, yet efcient, 900 Watt heating system
maintains the right temperature to properly hold

products. Heats up to 200˚F (93˚C).

• Internal frame in body and door maintains
structural rigidity.

JOB:

ITEM NO:

• Body constructed of non-corrosive, Hi-Tensile
aluminum for strength and ease of mobility.

• Safety-conscious anti-microbial latch protects
against spreading germs.

• Insulated eld reversible door for exibility.
Standard with right hand hinging; left hand
hinging available upon request.

• Magnetic latch for “easy open”; latch and
hinges mounted inboard.

• Pan slides securely hold (5) 12" x 20" x 2-

1/2" or (5) 13" x 18" pans on 2-3/4" centers;

removable for easy cleaning.

• Pan stops on inside of door and back allow for

proper air ow.

• Mounted on 4" legs to allow for counter top
cleaning.

H-339-12-135C

®

C US

ACCESSORIES and OPTIONS
(Available at extra cost):

q Transport Kit (solid base, casters, side lift

handles, spring compression latch)

q Stainless Steel

q Corner Bumpers

q Digital Thermometer

q Caster Kit

q 240 Volt Service

See page B-20 for accessory details.

Page B-13.1

Nov., 2013

PAN SLIDE

12

A

H-339-12-135C

1-1/8

B

2-3/4

5/8

DETAIL OF

CRES COR

MODEL NO.

CAP SIZE WIDTH DEPTH HEIGHT WIDTH DEPTH HEIGHT

H-339-12-135C 5

ALL CONSTRUCTION IS RIVETED, WELDED AND FINISHED.

PAN DIM "A" DIM "B" DIM "C" INSIDE DIMENSIONS

12 x 20 IN 17-7/8 25-1/4 27-9/16 13-3/16 21-1/4 17-7/8 LBS 95

305 x 510 MM 455 645 700 335 540 455 KG 43.1

5

13 x 18 IN

330 x 460 MM

CABINET:

• Body: .063 aluminum.

• Reinforcement: Internal framework of channels, 1 x 3/4 x .125.

• Insulation: Fiberglass, thermal conductivity (K factor) is .23 at

75˚F. 1-1/2” in walls; 1” in door, top and bottom.

• Pan stop channels: Mounted to inside rear of cabinet and door.

• Legs (4): 4" high, black.

DOOR:

• Field reversible.

• Formed .063 aluminum.

• Latch: Chrome plated zinc with composite handle, magnetic

type; mounted inboard.

• Hinges: Heavy duty chrome plated zinc; mounted inboard.

• Gasket: Perimeter type, silicone.

• Vent: Adjustable.

PAN SLIDES:

• 18 ga. 304 stainless steel channels on 2-3/4" centers.

• Mounted to removable 16 ga. 304 stainless steel post.

A B

C

26-1/8

G

W

5-15P

WEIGHT

ACT.

ELECTRICAL COMPARTMENT:

• Cover: Formed .100 aluminum fastened to cabinet top.

• Control panel: Formed .063 aluminum; black front.

• Thermostat: Electro-mechanical, room ambient to 200˚F (93˚C).

• Switch: Lighted ON-OFF rocker type.

• Power cord: Permanent, 6 ft., 14/3 ga. with molded straight plug.

• Heaters (3): 300 Watts each.

• Thermometer.

POWER REQUIREMENTS:

• 900 Watts, 120 Volts, 60 Hz., single phase, 7.5 Amps., 15 Amp.

service.

SHORT FORM SPECIFICATIONS

Cres Cor Insulated Counter Top Hot Cabinet Model

H-339-12-135C. Inner, outer and top liners of .063

aluminum, reinforced with channel frame. Field

reversible, formed .063 aluminum door. Fiberglass

insulation in walls 1-1/2”; door, top and bottom 1”.

Welded and nished. (3) 300 Watt inner wall heaters,
120 Volts. Removable pan supports for (5) 12" x 20" pans
or (5) 13" x 26" pans . Mounted on 4" high legs. 2-Year
Parts / 1-Year Labor warranty. Provide the following

accessories: ____ _____ _____ CSA-US, CSA-C,
CSA to NSF4 listed.

In line with its policy to continually improve its products,

5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: [phone]

www.crescor.com

© Crescent Metal Products, Inc. 2013 All rights reserved. Litho in U.S.A.

CRES COR reserves the right to change materials and

specications without notice.