Cres Cor H161FUA11CM208 Service Manual

H161FUA11CM

Warming Cabinet

FL-2245

5925 Heisley Road • Mentor, OH 44060-1833

Rev. 3 (9/07) Page 1 of 3

OPERATING and MAINTENANCE INSTRUCTIONS

H161FUA11CM

Correctional Insulated Heated Cabinet

ELECTRICAL SPECIFICATIONS: AC Service

Model No. Volts Watts Amps Hertz Phase NEMA Location

H161FUA11CM 120 1600 13.3 60 1 5-15P US
H161FUA11CMCAN 120 1600 13.3 60 1 5-20P US/CAN
H161FUA11CM208 208 1600 7.7 60 1 6-15-P US/CAN
H161FUA11CM240 240 1600 6.7 60 1 6-15P US/CAN

HOW TO START UNIT:

Plug the power cord into proper wall outlet.1.
Preheat cabinet for 30 minutes.2.

NOTE: Temperature is pre-set for 180°F/82°C.
Put food into cabinet.3.

HOW TO SHUT OFF UNIT:

Unplug power cord from wall outlet

HOW TO ADJUST TEMPERATURE:

Unplug power cord from wall outlet.1.
Remove top cover.2.
Turn thermostat knob to higher numbers 3.

(higher temperatures) or lower numbers (lower
temperatures).

NOTE: No. 5 setting is approximately 150°F/66°C.

Proper food holding temperature is
140°F/60°C or higher.

NEED KNOB THERMOSTAT

IMAGE

Call Toll-free: 877-CRES COR (273-7267) • Fax: [phone] • www.crescor.com

H161FUA11CM

Warming Cabinet

FL-2245

5925 Heisley Road • Mentor, OH 44060-1833

OPERATING and MAINTENANCE INSTRUCTIONS

H161FUA11CM

Correctional Insulated Heated Cabinet

WARNING

BEFORE CLEANING CABINET:

Unplug power cord from wall outlet1.
Allow cabinet to cool2.
Do 3. NOT use abrasives or harsh

chemicals. Be sure your cleaner is
suitable for stainless steel.

HOW TO CLEAN THE UNIT:

Soil Cleaner Method

Mild detergent* and hot water, or
mild abrasive cleaner.

Steam (no strong alkaline additive).
Chemical oven cleaner, for stainless

steel. Mild abrasive cleaner; oily
waxy cleaner.

CABINET

Stainless

Steel Inside

and Outside

DIRT

FINGERPRINTS
GREASE and OIL

WATER SPOTS Mild abrasive cleaner.

*Mild detergents include soaps and non-abrasive cleaners.

Rev. 3 (9/07) Page 2 of 3

Cleaning Notes:

Wipe up spills as soon as possible.1.
Clean cabinet regularly to avoid heavy dirt build-up.2.
Make a test spot with cleaner.3.
Follow manufacturer’s directions on cleaner.4.
Do not mix cleaners.5.
Avoid drips and splashes.6.

1. Use soft, damp cloth

2. Rinse well with hot water.

3. Wipe dry.

1. Rinse after steam cleaning.

2. Wipe dry.

1. Apply with clean, soft cloth.

2. Follow oven cleaner manufacturer’s
directions.

1. Apply with damp cloth

2. Rinse and dry.

REPLACEMENT PARTS:

DESCRIPTION 120V 120-CAN 208V 240V

Heater 0811-244 0811-244 0811-245 0811-246
Blower 0769-005-K 0769-005-K 0769-006-K1 0769-006-K1
Blower 0769-093 0769-096 0769-069 0769-069
Fan Vent 0769-165 0769-165 0769-174 0769-174
Plug 0852-106 0713-017 0713-056 0713-056
Cord 0812-465 0812-465 0812-465 0812-465
Thermostat 0848-062-K 0848-062-K 0848-062-K 0848-062-K
Thermometer 5238-030-K 5238-030-K 5238-030-K 5238-030-K
Caster 0569-290 0569-290 0569-290 0569-290
NEMA 5-15 5-20 6-15 6-15

Call Toll-free: 877-CRES COR (273-7267) • Fax: [phone] • www.crescor.com