Cres Cor H-138-PWS-1834D User Manual
INSULATED STAINLESS STEEL PASS-THRU
AQUATEMP™ HOT CABINET
MODEL H-138-PWS-1834D
FEATURES AND BENEFITS:
• Fully insulated hot cabinet keeps prepared foods at
serving temperatures.
• Powerful, yet efcient, heating system maintains the
right combination of heat and humidity to properly hold
products. 2000 Watts of heat holds food at up to 200˚F
(93˚C).
• AquaTemp system maintains optimum food texture
through continuous monitoring of both temperature
and humidity. Temperature and humidity values are
measured, displayed and controlled through intuitive
solid state controller. Air temperature is prioritized over
humidity to ensure food safety. Low water indicating
LED and water heater shut off when water is at critically
low level.
• Stainless steel construction throughout with internal
frame in body and doors plus reinforced internal base
maintains structural rigidity.
• Smooth interior coved corners prevent food
particle/grease buildup.
JOB:
ITEM NO:
®
®
C US
H-138-PWS-1834D
• Pass-thru design allows for easy access from
preparation area and serving areas.
• Field reversible insulated Dutch doors on front and
back with anti-microbial latches prevent temperature
loss and protect against spreading germs. Silicone door
gaskets for proper seal.
• Standard with right hand hinging; left hand hinging
available upon request.
• High temperature ceramic magnetic latches for "easy
open”; twist-lock catch keeps doors securely closed.
• Recessed push/pull handles on both sides prevent
damage to walls; allows easy maneuvering.
• Channel pan slides securely hold 18" x 26" pans on
1-1/2" centers without tipping.
• Integral drip trough on front keeps trafc area dry, safer.
• Heavy duty 5" swivel casters, two with brakes. Provides
mobility when fully loaded.
5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: 440/350-7267
www.crescor.com
New, easier to use, easy-to-read and operate
LED digital display ensures holding at precise
food temperatures and moisture content.
ACCESSORIES and OPTIONS
(Available at extra cost):
q Automatic Water Fill System
q Tempered Glass Door Windows
q Bail Handles
q Lock Hasp
q Side Bumper Kit
q Extra Universal Angles
q 208 or 240 Volt Service
q 1500 Watt, 15 Amp. Power Unit
q HACCP Documentation (Built-in USB port)
See page B-20 for accessory details.
Gold indicates our Best Insulated
Hot Cabinets with the best warranty
in the industry.
3-Year Parts / 1-Year Labor.
Page B-6.5
Feb., 2014
5-20P
W
G
11/16
H-138-PWS-1834D
4"
6"
1-1/2
DETAIL OF
PAN SLIDE
CRES COR
MODEL NO.
H-138-PWS-1834D
"A"
PAN DIM "A" DIM "B" DIM "C" INSIDE DIMENSIONS
CAP SIZE WIDTH DEPTH HEIGHT WIDTH DEPTH HEIGHT
32
18 X 26 IN 28-1/4 34-5/8 73-1/2 21-3/4 26-7/8 58 LBS 317
460 X 660 MM 720 880 1865 555 685 1475 KG 144
"C"
W
5-20P
"B"
NOTES: 1. Send sample pan or tray with order when using any that are not 18" x 26" pans with heavy beaded edges.
2. When ordering bumpers, add 2" to overall dimensions.
Gold indicates our Best Insulated
Hot Cabinets with the best warranty
in the industry.
3-Year Parts / 1-Year Labor.
CABINET:
• Body: 22 ga. stainless steel.
• Reinforcement: Internal framework of 18 ga. stainless steel.
• Insulation: Fiberglass, thermal conductivity (K factor) is .23 at
75˚F. 1-1/2" in doors, top, base; 2" in sidewalls.
• Air tunnels: 22 ga. stainless steel; lift-out type, mounted on sides.
• Push/pull handles (4): 5” vertical; recessed.
• Interior coved corners.
BASE:
• One piece construction, .125 aluminum.
• Drip troughs: Formed 18 ga. stainless steel mounted to front
amd rear of cabinet; removable drip pans.
• Casters: 5" dia., swivel, modulus tires, 1-1/4 wide, load cap.
250 lbs. each, temp. range -45˚/+180˚F. Delrin bearings. Front
casters equipped with brakes.
DUTCH DOORS:
HOT UNIT COMPONENTS:
• Thermostat (holding): Solid state digital display control, room
ambient to 200˚F (93˚C).
• Thermostat (humidity): Solid state digital display control, room
ambient to 95%.
• Switch: ON-OFF push button type.
• Power cord: Permanent, 10 ft., 12/3 ga.
• Heater: 2000 Watts for holding.
• Blower motor.
• Vent fan.
• Water pan: 4 gallons; 16 ga. stainless steel with 1850 Watt
heater for humidity.
• Thermometer: Digital.
POWER REQUIREMENTS:
• 2000 Watts, 120 Volts, 60 Hz., single phase, 16 Amps., 20 Amp.
service.
• Field reversible.
• Formed 22 ga. stainless steel.
• Latches: Chrome plated zinc, high temperature ceramic
magnetic type.
• Transport Latches.
• Hinges: Heavy duty chrome plated zinc.
• Gaskets: Perimeter type, silicone.
• Pan stops: Embossed.
PAN SLIDES:
• Channel: Extruded aluminum, 11/16 x 1-1/2 x .100, riveted on
1-1/2" centers.
Cres Cor Insulated AquaTemp Hot Cabinet Model
H-138-PWS-1834D. Solid state electronic controlled time,
temperature and moisture content. Cabinet 22 ga. stainless
steel; stainless steel internal frame. No-tip .100 aluminum
channel slides for (32) 18" x 26" pans on 1-1/2" centers. Field
reversible Dutch doors, 22 ga. stainless steel. Fiberglass
insulation in sides 2"; doors, top, base 1-1/2". Interior coved
corners. 2000 Watt, 120 Volt power unit; adjustable heat
SHORT FORM SPECIFICATIONS
and humidity. One piece insulated base, .125 aluminum. 5"
swivel modulus casters, Delrin bearings. Load capacity 250
lbs. each. 3-Year Parts/ 1-Year Labor warranty. Provide
the following accessories: . NSF, CSA-US,
CSA-C listed.
G
WEIGHT
ACT.
In line with its policy to continually improve its products,
5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: 440/350-7267
www.crescor.com
© Crescent Metal Products, Inc. 2014 All rights reserved. Litho in U.S.A.
CRES COR reserves the right to change materials and
specications without notice.
Loading...