Cres Cor H-138-PS-1834D User Manual

Page 1
INSULATED
C US
®
STAINLESS STEEL HOT CABINET
MODEL H-138-PS-1834D
FEATURES AND BENEFITS:
• Fully insulated hot cabinet keeps prepared foods at serving temperatures.
• Pass-thru design allows for access to preparation and serving areas.
Powerful, yet efcient, 2000 Watt heating system maintains the right temperature to
properly hold products. Heats up to 200˚F (93˚C).
• Standard solid state electronic control with large, clear, easy-to-read and operate LED digital display to ensure holding at precise food temperature
• Internal frame in body maintains structural rigidity.
• Stainless steel construction throughout for ease of cleaning. One piece extended base protects cabinet body.
SANITATION
NSF/ANSI 4
JOB:
ITEM NO:
®
H-138-PS-1834D
• Smooth interior coved corners prevent food particles/grease buildup.
• Safety-conscious anti-microbial latches protect against spreading germs.
• Field reversible insulated Dutch doors on front and back prevent temperature loss. Silicone door gaskets for proper seal.
• Standard with right hand hinging; left hand hinging available upon request.
• High temperature ceramic magnetic latch for “easy open”; twist-lock catch secures door during transport.
• Recessed push/pull handles on both sides prevents damage to walls; allows easy maneuvering.
• Channel pan slides securely hold 18" x 26" pans on 1-1/2" centers without tipping.
• Heavy duty 5" swivel casters, two with brakes. Provides mobility when fully loaded.
5925 Heisley Road • Mentor, OH 44060-1833 Phone: 877/CRESCOR • Fax: 440/350-7267
www.crescor.com
Standard solid state electronic control with large,
clear, easy-to-read and operate LED digital display
to ensure holding at precise food temperature
ACCESSORIES and OPTIONS (Available at extra cost):
q Food Temperature Probe
q Tempered Glass Door Windows
q Key Lock Handle
q Lock Hasp
q Corner Bumpers
q Perimeter Bumper
q Floor Lock (for use with 5" casters)
q Various Caster Options
q 208 or 240 Volt Service
See page B-30 for accessory details.
Gold indicates our Best Insulated Hot Cabinets with the best warranty in the industry. 3-Year Parts / 1-Year Labor.
Page B-4.2
Jan., 2017
Page 2
H-138-PS-1834D
5-20P
W
G
Scan QR code to view Spec Sheet, Operating Manual, Wiring Diagram or to call Cres Cor
®
Customer Service.
If you need a QR reader, visit your App Store on your Smartphone or Tablet.
Model H-138-PS-1834D
8400-030
11/16
4"
6"
1-1/2
"C"
DETAIL OF PAN SLIDE
"B"
CRES COR
MODEL NO.
H-138-PS-1834D
"A"
PAN DIM "A" DIM "B" DIM "C" INSIDE DIMENSIONS
CAP SIZE WIDTH DEPTH HEIGHT WIDTH DEPTH HEIGHT
32
18 X 26 IN 28-3/4 34-5/8 73-1/2 18-1/16 26-7/8 58 LBS 272
460 X 660 MM 730 880 1865 460 685 1475 KG 123
NOTES: 1. Send sample pan or tray with order when using any that are not 18" x 26" pans with heavy beaded edges.
2. When ordering bumpers, add 2" to overall dimensions.
CABINET:
• Body: 22 ga. stainless steel.
• Reinforcement: Internal framework of 18 ga. stainless steel.
• Insulation: Fiberglass, thermal conductivity (K factor) is .23 at
75˚F. 1-1/2" in doors, top, base; 2" in sidewalls.
• Air tunnels: 22 ga. stainless steel; lift-out type, mounted on sides.
• Push/pull handles (4): 5” vertical; recessed.
• Interior coved corners.
BASE:
• One piece construction, .125 aluminum.
• Casters: 5" dia., swivel, modulus tires, 1-1/4 wide, load cap.
250 lbs. each, temp. range -45˚/+180˚F. Delrin bearings. Front
HOT UNIT COMPONENTS:
• Thermostat: Solid state digital display control, room ambient to
200˚F (93˚C).
• Switch: ON-OFF push button type.
• Power cord: Permanent, 10 ft., 12/3 ga.
• Heater: 1850 Watts.
• Blower motor.
• Vent Fan.
• Thermometer: Digital.
POWER REQUIREMENTS:
• 2000 Watts, 120 Volts, 60 Hz., single phase, 16 Amps., 20 Amp. service.
Gold indicates our Best Insulated Hot Cabinets with the best warranty in the industry. 3-Year Parts / 1-Year Labor.
casters equipped with brakes.
DUTCH DOORS:
• Field reversible.
• Formed 22 ga. stainless steel.
• Latches: Chrome plated zinc, high temperature ceramic magnetic type, mounted inboard.
• Transport Latches.
• Hinges: Heavy duty chrome plated zinc.
• Gaskets: Perimeter type, silicone.
• Pan stops: Embossed.
PAN SLIDES:
• Channels: Extruded aluminum, 11/16 x 1-1/2 x .100, riveted on 1-1/2" centers.
Cres Cor Insulated Hot Cabinet Model H-138-PS-1834D. Solid state electronic controlled time and temperature. Cabinet 22 ga. stainless steel; stainless steel internal frame. No-tip .100 aluminum channel slides for (32) 18" x
SHORT FORM SPECIFICATIONS
26" pans on 1-1/2" centers. Field reversible Dutch doors,
Scan QR code to view Spec Sheet, Operating Manual, Wiring Diagram or to call Customer Service.
If you need a QR reader visit your App Store on your Smartphone or Tablet.
22 ga. stainless steel. Fiberglass insulation in sides 2"; doors, top, base 1-1/2". Interior coved corners. 2000 Watt, 120 Volt power unit. One piece insulated base, .125 aluminum. 5" swivel modulus casters, Delrin bearings. Load capacity 250 lbs. each. 3-Year Parts / 1-Year Labor warranty. Provide the following accessories:____ ____ ____ NSF, CSA-US, CSA-C listed.
G
W
5-20P
WEIGHT
ACT.
5925 Heisley Road • Mentor, OH 44060-1833 Phone: 877/CRESCOR • Fax: 440/350-7267
www.crescor.com
© Crescent Metal Products, Inc. 2017 All rights reserved. Made in America Since 1936
In line with its policy to continually improve its products, CRES COR reserves the right to change materials and
specications without notice.
Loading...