Page 1
INSULATED STAINLESS STEEL
AQUATEMP™ HOT CABINET
MODEL H-137-WSUA-6D
FEATURES AND BENEFITS:
• Fully insulated 1/2 size hot cabinet keeps prepared
foods at serving temperatures.
• Powerful, yet efcient, heating system maintains the
right combination of heat and humidity to properly hold
products.
• 2000 Watts of heat holds food at up to 200˚F (93˚C).
• AquaTemp system maintains optimum food texture
through continuous monitoring of both temperature and
humidity. Temperature and humidity values are measured,
displayed and controlled through intuitive solid state
controller. Air temperature is prioritized over humidity to
ensure food safety. Low water indicating LED and water
heater shut off when water is at critically low level.
• Internal frame in body and doors plus reinforced
internal base maintains structural rigidity.
JOB:
ITEM NO:
®
®
C US
• Stainless steel construction throughout for ease of
cleaning.
• Smooth interior coved corners prevent food
particle/grease buildup.
• Safety-conscious anti-microbial latch protects against
spreading germs.
• Field reversible insulated door prevents temperature
loss. Silicone door gasket for proper seal.
• Standard with right hand hinging; left hand hinging
available upon request.
• High temperature ceramic magnetic latch for "easy
open”; twist-lock catch keeps door securely closed.
• Six sets of stainless steel wire universal angles
accommodate a large variety of pan sizes on
adjustable 1-1/2" centers.
• Integral drip trough on front keeps trafc area dry,
safer.
• Heavy duty 5" swivel casters, two with brakes.
Provides mobility when fully loaded.
H-137-WSUA-6D
New, easier to use, easy-to-read and operate
LED digital display ensures holding at precise
food temperatures and moisture content.
ACCESSORIES and OPTIONS
(Available at extra cost):
q Tempered Glass Door Window
q Lock Hasp
q Extra Universal Angles
q Bumper Kit (3 sided)
q Rear Push Handle
q Bail Handles
q Key Lock Handle
q 208 or 240 Volt Service
q 1500 Watt, 15 Amp. Power Unit
q HACCP Documentation (Built-in USB port)
See page B-20 for accessory details.
5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: 440/350-7267
www.crescor.com
Gold indicates our Best Insulated
Hot Cabinets with the best warranty
in the industry.
3-Year Parts / 1-Year Labor.
Page B-6.6
Feb., 2014
Page 2
5-1/8
"A"
"B"
H-137-WSUA-6D
A
3"
6
SETS
B
"C"
PAN DIM "A" DIM "B" DIM "C" INSIDE DIMENSIONS
SIZE WIDTH DEPTH HEIGHT WIDTH DEPTH HEIGHT
SEE NOTE
BELOW
IN 28-1/4 33-3/8 43-3/8 22 26-3/4 28 LBS 199
MM 720 850 1100 560 680 715 KG 90
PROOF/HOT UNIT COMPONENTS:
• Thermostat (holding): Solid state digital display control, room
ambient to 200˚F (93˚C).
• Thermostat (humidity): Solid state digital display control, room
ambient to 95%.
• Switch: ON-OFF push button type.
• Power cord: Permanent, 10 ft., 12/3 ga.
• Heater: 2000 Watts for holding.
41-1/2"
1-1/2
ADJ.
DETAIL OF
PAN SLIDE
CRES COR
MODEL NO.
CAP/ANGLES
H-137-WSUA-6D
NOTES: 1. Pan sizes 22" x 20" (560 x 510) Roast & Bake Pans, 10" x 20" (255 x 510) Roast & Bake Pans, 18" x 26" (460 x 660)
Bun Pans, 14" x 18" (355 x 460) Service Trays, 12" x 20" (305 x 510) Steam Table Pans.
Refer to Pan Size Chart at end of section.
2. When ordering bumpers, add 2" to overall dimensions.
CABINET:
• Body: 22 ga. stainless steel.
• Reinforcement: Internal framework of 18 ga. stainless steel.
• Insulation: Fiberglass, thermal conductivity (K factor) is .23 at
75˚F. 1-1/2" in doors, top, base; 2" in sidewalls.
• Air tunnels: 22 ga. stainless steel; lift-out type, mounted on sides.
• Interior coved corners.
• Cord wrap.
• Blower motor.
BASE:
• One piece construction, .125 aluminum.
• Drip trough: Formed 18 ga. stainless steel mounted to front of
cabinet; removable drip pan.
• Casters: 5" dia., swivel, modulus tires, 1-1/4 wide, load cap.
250 lbs. each, temp. range -45˚/+180˚F. Delrin bearings. Front
casters equipped with brakes.
• Vent fan.
• Thermometer: Digital.
• Water pan: 4 gallons; 16 ga. 304 stainless steel with 1850 Watt
heater for humidity.
POWER REQUIREMENTS:
• 2000 Watts, 120 Volts, 60 Hz., single phase, 16 Amps., 20 Amp.
service.
DOOR:
• Field reversible.
• Formed 22 ga. stainless steel.
• Latch: Chrome plated zinc, high temperature ceramic magnetic type.
• Transport Latch.
• Hinges: Heavy duty chrome plated zinc.
• Gasket: Perimeter type, silicone.
• Pan stop: Embossed.
PAN SLIDES:
• Stainless steel wire universal angles (.306 dia.), mounted on
lift-out posts.
• Spaced on 4-1/2" centers; adjustable on 1-1/2" centers.
Cres Cor Insulated AquaTemp Hot Cabinet Model
H-137-WSUA-6D. Solid state electronic controlled time,
temperature and moisture content. Cabinet 22 ga. stainless
steel; stainless steel internal frame. (6) sets stainless
steel wire universal angles for multiple pan sizes,
adjustable spacing every 1-1/2". Field reversible door,
22 ga. stainless steel. Fiberglass insulation in sides 2";
doors, top, base 1-1/2". Interior coved corners. 2000
Watt, 120 Volt power unit; adjustable heat and humidity.
One piece insulated base, .125 aluminum. 5" swivel
SHORT FORM SPECIFICATIONS
modulus casters, Delrin bearings. Load capacity 250 lbs.
each. 3-Year Parts / 1-Year Labor warranty. Provide the
following accessories: ____ _____ _____ . NSF,
CSA-US, CSA-C listed.
G
W
5-20P
WEIGHT
ACT.
In line with its policy to continually improve its products,
5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: 440/350-7267
www.crescor.com
© Crescent Metal Products, Inc. 2014 All rights reserved. Litho in U.S.A.
CRES COR reserves the right to change materials and
specications without notice.
Loading...