Cres Cor H-137-WSUA-6C User Manual

INSULATED STAINLESS STEEL

AQUATEMP™ HOT CABINET

MODEL H-137-WSUA-6C

FEATURES AND BENEFITS:

• Fully insulated 1/2 size hot cabinet keeps
prepared foods at serving temperatures.

• Powerful, yet efcient, heating system maintains
the right combination of heat and humidity to
properly hold products.

• 2000 Watts of heat holds food at up to 200˚F
(93˚C).

• AquaTemp system allows you to hold with
humidity by adjusting individual thermostats;
regulate humidity levels by controlling air
temperature to 180°F (82°C); lowering air
temperature allows for humidity up to 95%.

JOB:

ITEM NO:

• Internal frame in body and doors plus reinforced
internal base maintains structural rigidity.

• Stainless steel construction throughout for ease
of cleaning.

• Smooth interior coved corners prevent food
particle/grease buildup.

• Safety-conscious anti-microbial latch protect
against spreading germs.

• Field reversible insulated door prevents
temperature loss. Silicone door gaskets for
proper seal.

• Standard with right hand hinging; left hand
hinging available upon request.

• High temperature ceramic magnetic latches for
"easy open”; twist-lock catch keeps door securely

closed.

• Six sets of stainless steel wire universal angles
accommodate a large variety of pan sizes on
adjustable 1-1/2" centers.

• Integral drip trough on front keeps trafc area dry,
safer.

• Heavy duty 5" swivel casters, two with brakes.
Provides mobility when fully loaded.

H-137-WSUA-6C

¨ N

C US

ACCESSORIES and OPTIONS
(Available at extra cost):

q Tempered Glass Door Windows

q Lock Hasp

q Extra Universal Angles

q Bumper Kit (3 sided)

q Push Handle

q Key Lock Handle

q Food Safe Digital Thermometer

q 208 or 240 Volt Service

See page B-20 for accessory details.

®

5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: [phone]

www.crescor.com

Gold indicates our Best Insulated
Hot Cabinets with the best warranty
in the industry.
3-Year Parts / 1-Year Labor.

Page B-6.6

Oct., 2011

H-137-WSUA-6C

CRES COR

MODEL NO.

H-137-WSUA-6C

NOTES: 1. Pan sizes 22" x 20" (560 x 510) Roast & Bake Pans, 10" x 20" (255 x 510) Roast & Bake Pans, 18" x 26" (460 x 660)

Bun Pans, 14" x 18" (355 x 460) Service Trays, 12" x 20" (305 x 510) Steam Table Pans.
Refer to Pan Size Chart at end of section.

2. When ordering bumpers, add 2" to overall dimensions.

ALL CONSTRUCTION IS RIVETED, WELDED AND FINISHED.

CAP/ANGLES

SETS

CABINET:

• Body: 22 ga. stainless steel.

• Reinforcement: Internal framework of 18 ga. stainless steel.

• Insulation: Fiberglass, thermal conductivity (K factor) is .23 at
75˚F. 1-1/2" in doors, top, base; 2" in sidewalls.

• Air tunnel: 22 ga. stainless steel; lift-out type, mounted on back.

• Push/pull handles (2): 5” vertical; recessed.

• Interior coved corners.

BASE:

• One piece construction, .125 aluminum.

• Drip trough: Formed 18 ga. stainless steel mounted to front of
cabinet; removable drip pan.

• Casters: 5" dia., swivel, modulus tires, 1-1/4 wide, load cap.
250 lbs. each, temp. range -45˚/+180˚F. Delrin bearings. Front
casters equipped with brakes.

PAN DIM "A" DIM "B" DIM "C" INSIDE DIMENSIONS

SIZE WIDTH DEPTH HEIGHT WIDTH DEPTH HEIGHT

6

SEE NOTE

BELOW

IN 28 35-1/8 43 22 27-1/2 28 LBS 199

MM 715 895 1095 560 700 715 KG 90

PROOF/HOT UNIT COMPONENTS:

• Top mounted; removable with tools.

• Thermostat (holding): Solid state, room ambient to 200˚F (93˚C).

• Thermostat (humidity): Solid state, room ambient to 95%.

• Power light

• Switch: rocker type.

• Power cord: Permanent, 10 ft., 12/3 ga.

• Heater: 2000 Watts for holding.

• Blower motor.

• Vent fan.

• Thermometer: Analog.

• Water pan: 4 gallons; 16 ga. 304 stainless steel with 1850 Watt
heater for humidity.

POWER REQUIREMENTS:

• 2000 Watts, 120 Volts, 60 Hz., single phase, 16 Amps., 20 Amp.
service.

DUTCH DOORS:

• Field reversible.

• Formed 22 ga. stainless steel.

• Latches: Chrome plated steel, high temperature ceramic
magnetic type.

• Transport Latch.

• Hinges: Heavy duty chrome plated steel.

• Gaskets: Perimeter type, silicone.

• Pan stops: Embossed.

PAN SLIDES:

• Stainless steel wire universal angles (.306 dia.), mounted on
lift-out posts.

• Spaced on 4-1/2" centers; adjustable on 1-1/2" centers.

Cres Cor Insulated AquaTemp Hot Cabinet Model
H-137-WSUA-6C. Cabinet 22 ga. stainless steel;
stainless steel internal frame. (6) sets stainless steel
wire universal angles for multiple pan sizes, adjustable
spacing every 1-1/2". Field reversible door, 22 ga.
stainless steel. Fiberglass insulation in sides 2"; doors,
top, base 1-1/2". Interior coved corners. 2000 Watt,
120 Volt power unit; adjustable heat and humidity.
One piece insulated base, .125 aluminum. 5" swivel

SHORT FORM SPECIFICATIONS

modulus casters, Delrin bearings. Load capacity 250 lbs.
each. 3-Year Parts / 1-Year Labor warranty. Provide the
following accessories: ____ _____ _____ . NSF,
CSA-US, CSA-C listed.

WEIGHT

ACT.

In line with its policy to continually improve its products,

5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: [phone]

www.crescor.com

© Crescent Metal Products, Inc. 2011 All rights reserved. Litho in U.S.A.

CRES COR reserves the right to change materials and

specications without notice.