Cres Cor H-137-UA-9C User Manual
INSULATED
HOT CABINET
MODEL H-137-UA-9C
FEATURES AND BENEFITS:
• Fully insulated 3/4 size holding cabinet keeps
prepared foods at serving temperatures.
• Powerful, yet efcient, 1500 Watt heating
system maintains the right temperature to
properly hold products. Heats up to 200˚F
(93˚C).
• Self-contained power top allows interior of
cabinet to be hosed-out during cleaning.
• Internal frame in body maintains structural
rigidity.
JOB:
ITEM NO:
• Body constructed of non-corrosive, Hi-Tensile
aluminum for strength and ease of mobility.
One piece extended base protects cabinet
body.
• Smooth interior coved corners prevent food
particle/grease buildup.
• Safety-conscious anti-microbial latch protect
against spreading germs.
• Self-closing insulated door prevents
temperature loss; magnetic door gasket for
proper seal. Field reversible for exibility.
• Standard with right hand hinging; left hand
hinging available upon request.
• Full length extruded door handle for "easy
open"; positive catch secures door during
transport.
• Recessed push/pull handle on both sides
prevents damage to walls; allows easy
maneuvering.
• Nine sets of chrome plated wire universal
angles accommodate a large variety of pan
sizes on adjustable 1-1/2" centers.
• Heavy duty 5" swivel casters, two with brakes.
Provides mobility when fully loaded.
H-137-UA-9C
¨ N
C US
ACCESSORIES and OPTIONS
(Available at extra cost):
q Key Lock Handle
q Tempered Glass Door Windows
q Door with Magnetic Latch
q Extra Universal Angles
q Change from standard chrome plated wire
angles to angles designed for transporting
q Change from chrome plated wire angles to extruded
aluminum or formed stainless steel angles.
q Corner Bumpers
q Perimeter Bumper
q Floor Lock (for use with 5" casters)
q Various Caster Options
q Removable Cord Set
q 208 or 240 Volt Service
q Food Safe Digital Thermometer
See page B-20 for accessory details.
®
5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: 440/350-7267
www.crescor.com
Gold indicates our Best Insulated
Hot Cabinets with the best warranty
in the industry.
3-Year Parts / 1-Year Labor.
Page B-6
Oct., 2011
5-1/16
4-1/2
10"
H-137-UA-9C
A
A
B
B
C
DETAIL OF
PAN SLIDE
CRES COR
MODEL NO.
CAP/ANGLES
H-137-UA-9C
NOTES: 1. Pan sizes 22" x 20" (560 x 510) Roast & Bake Pans, 10" x 20" (255 x 510) Roast & Bake Pans, 18" x 26" (460 x 660)
ALL ALUMINUM CONSTRUCTION IS RIVETED, WELDED AND FINISHED.
Bun Pans, 14" x 18" (355 x 460) Service Trays, 12" x 20" (305 x 510) Steam Table Pans.
Refer to Pan Size Chart at end of section.
2. When ordering bumpers, add 2" to overall dimensions.
CABINET:
• Body: .063 aluminum.
• Reinforcement: Internal framework of 18 ga. stainless steel.
• Insulation: Fiberglass, thermal conductivity (K factor) is .23 at
75˚F. 1-1/2" in door, base, top; 2" in sidewalls.
• Air tunnel: 22 ga. stainless steel; lift-out type, mounted on back.
• Push/pull handles (2): 5” vertical; recessed.
• Interior coved corners.
BASE:
• One piece construction, .125 aluminum.
• Casters: 5" dia., swivel, modulus tires, 1-1/4 wide, load cap.
250 lbs. each, temp. range -45˚/+180˚F. Delrin bearings. Front
casters equipped with brakes.
PAN DIM "A" DIM "B" DIM "C" INSIDE DIMENSIONS
SIZE WIDTH DEPTH HEIGHT WIDTH DEPTH HEIGHT
9
SETS
SEE NOTE
BELOW
IN 28-3/4 34-3/16 57-1/4 22 27-1/2 42 LBS 207
MM 730 870 1455 560 700 1070 KG 94
HOT UNIT COMPONENTS:
• Top mounted; removable with tools.
• Thermostat: Mechanical, room ambient to 200˚F (93˚C).
• Switch: ON-OFF rocker type.
• Power light.
• Power cord: Permanent, 10 ft., 14/3 ga.
• Heater: 1470 Watts.
• Blower motor.
• Vent fan.
• Thermometer: Analog
POWER REQUIREMENTS:
• 1500 Watts, 120 Volts, 60 Hz., single phase, 12 Amps., 15 Amp.
service.
Gold indicates our Best Insulated
Hot Cabinets with the best warranty
in the industry.
3-Year Parts / 1-Year Labor.
DOOR:
• Field reversible.
• Exterior: .063 brushed aluminum.
• Interior: 22 ga. stainless steel.
• Latch: Positive transport type with lock hasp.
• Extruded handle.
• Hinges: Self closing, stays open past 90°.
• Gasket: Perimeter type, magnetic Santoprene.
• Pan stop.
PAN SLIDES:
• Wire angles (.306 dia.), nickel chrome plated steel, mounted on
lift-off posts.
• Spaced on 4-1/2" centers; adjustable on 1-1/2" centers.
Cres Cor Insulated Hot Cabinet Model H-137-UA-9C.
Inner, outer and top liners of .063 aluminum, stainless
steel internal frame. (9) sets wire universal angles for
multiple pan sizes, adjust able spacing every 1-1/2".
Field reversible door, outer .063 brushed aluminum,
inner 22 ga. stainless steel. Fiberglass insulation in
sides 2"; doors, top, base 1-1/2". Interior coved corners.
Hose out cleaning capability. 1500 Watt, 120 Volt power
unit. One piece insulated base, .125 aluminum. 5"
swivel modulus casters, Delrin bearings. Load capacity
SHORT FORM SPECIFICATIONS
250 lbs. each. 3-Year Parts / 1-Year Labor warranty.
Provide the following accessories: ____ _____ _____ .
NSF, CSA-US, CSA-C listed.
54"
G
W
5-15P
WEIGHT
ACT.
In line with its policy to continually improve its products,
5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: 440/350-7267
www.crescor.com
© Crescent Metal Products, Inc. 2011 All rights reserved. Litho in U.S.A.
CRES COR reserves the right to change materials and
specications without notice.
Loading...