Cres Cor H-137-PWSUA-12C User Manual

INSULATED PASS-THRU STAINLESS STEEL
AQUATEMP™ HOT CABINET
MODEL H-137-PWSUA-12C
FEATURES AND BENEFITS:
• Fully insulated hot cabinet keeps prepared foods at serving temperatures.
• Powerful, yet efcient, heating system maintains the right combination of heat and humidity to properly hold products. 2000 Watts of heat holds food at up to 200˚F (93˚C).
• AquaTemp system allows you to hold with humidity by adjusting individual thermostats; regulate humidity levels by controlling air temperature to 180°F (82°C); lowering air temperature allows for humidity up to
95%.
• Internal frame in body and doors plus reinforced internal base maintains structural rigidity.
• Stainless steel construction throughout for ease of cleaning.
• Smooth interior coved corners prevent food particle/ grease buildup.
• Safety-conscious anti-microbial latches protect against spreading germs.
• Pass-through design allows for access from preparation and serving areas.
• Field reversible insulated Dutch doors prevent temperature loss. Silicone door gaskets for proper
seal.
• Standard with right hand hinging; left hand hinging available upon request.
• High temperature ceramic magnetic latches for "easy open”; twist-lock catch keeps door securely closed.
• Recessed push/pull handles on both sides prevents damage to walls; allows easy maneuvering.
• Twelve sets of stainless steel wire universal angles accommodate a large variety of pan sizes on adjustable 1-1/2" centers.
• Integral drip trough's on front and back keeps trafc area dry, safer.
• Heavy duty 5" swivel casters, two with brakes. Provides mobility when fully loaded.
JOB:
H-137-PWSUA-12C
¨ N
C US
ACCESSORIES and OPTIONS (Available at extra cost):
q Tempered Glass Door Windows
q Lock Hasp
q Extra Universal Angles
q Sides Bumper Kit
q Key Lock Handle
q Food Safe Digital Thermometer
q 208 or 240 Volt Service
See page B-20 for accessory details.
®
5925 Heisley Road • Mentor, OH 44060-1833 Phone: 877/CRESCOR • Fax: 440/350-7267
www.crescor.com
Gold indicates our Best Insulated Hot Cabinets with the best warranty in the industry. 3-Year Parts / 1-Year Labor.
Page B-6.4
Oct., 2011
H-137-PWSUA-12C
CRES COR
MODEL NO.
H-137-PWSUA-12C
NOTES: 1. Pan sizes 22" x 20" (560 x 510) Roast & Bake Pans, 10" x 20" (255 x 510) Roast & Bake Pans, 18" x 26" (460 x 660)
Bun Pans, 14" x 18" (355 x 460) Service Trays, 12" x 20" (305 x 510) Steam Table Pans. Refer to Pan Size Chart at end of section.
2. When ordering bumpers, add 2" to overall dimensions.
ALL CONSTRUCTION IS RIVETED, WELDED AND FINISHED.
CAP/ANGLES
CABINET:
• Body: 22 ga. stainless steel.
• Reinforcement: Internal framework of 18 ga. stainless steel.
• Insulation: Fiberglass, thermal conductivity (K factor) is .23 at 75˚F. 1-1/2" in doors, top, base; 2" in sidewalls.
• Air tunnel: 22 ga. stainless steel; lift-out type, mounted on side
walls.
• Push/pull handles (4): 5” vertical; recessed.
• Interior coved corners.
BASE:
• One piece construction, .125 aluminum.
• Drip troughs: Formed 18 ga. stainless steel mounted to base of cabinet; removable drip pans.
• Casters: 5" dia., swivel, modulus tires, 1-1/4 wide, load cap. 250 lbs. each, temp. range -45˚/+180˚F. Delrin bearings. Front casters equipped with brakes.
DUTCH DOORS:
• Field reversible.
• Formed 22 ga. stainless steel.
• Latches: Chrome plated steel, high temperature ceramic magnetic type.
• Transport Latches.
• Hinges: Heavy duty chrome plated steel.
• Gaskets: Perimeter type, silicone.
• Pan stops: Embossed.
PAN SLIDES:
• Stainless steel wire universal angles (.306 dia.), mounted on lift-out posts.
• Spaced on 4-1/2" centers; adjustable on 1-1/2" centers.
PAN DIM "A" DIM "B" DIM "C" INSIDE DIMENSIONS
SIZE WIDTH DEPTH HEIGHT WIDTH DEPTH HEIGHT
12
SETS
SEE NOTE
BELOW
IN 28-1/4 35-1/8 73 22 27-1/2 58 LBS 328
MM 720 895 1855 560 700 1475 KG 149
PROOF/HOT UNIT COMPONENTS:
• Top mounted; removable with tools.
• Thermostat (holding): Solid state, room ambient to 200˚F (93˚C).
• Thermostat (humidity): Solid state, room ambient to 95%.
• Power light
• Switch: rocker type.
• Power cord: Permanent, 10 ft., 12/3 ga.
• Heater: 2000 Watts for holding.
• Blower motor.
• Vent fan.
• Thermometer: Analog.
• Water pan: 4 gallons; 16 ga. 304 stainless steel with 1850 Watt heater for humidity.
POWER REQUIREMENTS:
• 2000 Watts, 120 Volts, 60 Hz., single phase, 16 Amps., 20 Amp. service.
SHORT FORM SPECIFICATIONS
Cres Cor Insulated Pass-Thru AquaTemp Hot Cabinet Model H-137-PWSUA-12C. Cabinet 22 ga. stainless steel; stainless steel internal frame. (12) sets stainless steel wire universal angles for multiple pan sizes, adjustable spacing every 1-1/2". Field reversible Dutch doors, front and back, 22 ga. stainless steel. Fiberglass insulation in sides 2"; doors, top, base 1-1/2". Interior coved corners. 2000 Watt, 120 Volt power unit; adjustable heat and humidity. One piece insulated base, .125 aluminum. 5" swivel modulus casters, Delrin bearings. Load capacity 250 lbs. each. 3-Year Parts / 1-Year Labor warranty. Provide the following
Gold indicates our Best Insulated Hot Cabinets with the best warranty in the industry. 3-Year Parts / 1-Year Labor.
accessories: ____ _____ _____ . NSF, CSA-US, CSA-C listed.
WEIGHT
ACT.
In line with its policy to continually improve its products,
5925 Heisley Road • Mentor, OH 44060-1833 Phone: 877/CRESCOR • Fax: 440/350-7267
www.crescor.com
© Crescent Metal Products, Inc. 2011 All rights reserved. Litho in U.S.A.
CRES COR reserves the right to change materials and
specications without notice.
Loading...