Cres Cor H-137-PSUA-12D User Manual

INSULATED STAINLESS STEEL

PASS THRU HOT CABINET

MODEL H-137-PSUA-12D

FEATURES AND BENEFITS:

• Fully insulated hot cabinet keeps prepared
foods at serving temperatures.

• Powerful, yet efcient, 2000 Watt heating
system maintains the right temperature to

properly hold products. Heats up to 200˚F
(93˚C).

• Standard solid state electronic control with
large, clear, easy-to-read and operate LED
digital display to ensure holding at precise food
temperature.

• Internal frame in body maintains structural
rigidity.

• Stainless steel construction throughout for ease
of cleaning. One piece extended base protects
cabinet body.

JOB:

ITEM NO:

®

®

C US

• Smooth interior coved corners prevent food
particle/grease buildup.

• Field reversible insulated Dutch doors on front
and back prevent temperature loss. Silicone
door gaskets for proper seal.

• Standard with right hand hinging; left hand
hinging available upon request.

• High temperature ceramic magnetic latches
for “easy open”; twist-lock catch secures door
during transport.

• Recessed push/pull handles on both sides
prevents damage to walls; allows easy
maneuvering.

• Twelve sets of chrome plated wire universal
angles accommodate a large variety of pan
sizes on adjustable 1-1/2" centers.

• Heavy duty 5" swivel casters, two with brakes.
Provides mobility when fully loaded.

H-137-PSUA-12D

Standard solid state electronic control with large,

clear, easy-to-read and operate LED digital display

to ensure holding at precise food temperature

ACCESSORIES and OPTIONS
(Available at extra cost):

q Tempered Glass Door Windows
q Key Lock Handle
q Lock Hasp
q Bail Handles
q Extra Universal Angles
q Change from standard chrome plated wire

angles to angles designed for transporting

q Corner Bumpers
q Perimeter Bumper
q Various Caster Options
q 208 or 240 Volt Service
q HACCP Documentation (Built-in USB port)

See page B-20 for accessory details.

5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: [phone]

www.crescor.com

Gold indicates our Best Insulated
Hot Cabinets with the best warranty
in the industry.
3-Year Parts / 1-Year Labor.

Page B-6.3

Feb., 2014

5-20P

W

G

5-1/8

H-137-PSUA-12D

4"

6"

ADJ.

1-1/2

"C"

G

W

5-20P

DETAIL OF

PAN SLIDE

"A"

CRES COR

MODEL NO.

ANGLES

H-137-PSUA-12D

NOTES: 1. Pan sizes 22" x 20" (560 x 510) Roast & Bake Pans, 10" x 20" (255 x 510) Roast & Bake Pans, 18" x 26" (460 x 660)

Bun Pans, 14" x 18" (355 x 460) Service Trays, 12" x 20" (305 x 510) Steam Table Pans.
Refer to Pan Size Chart at end of section.

2. When ordering bumpers, add 2" to overall dimensions.

CABINET:

• Body: 22 ga. stainless steel.

• Reinforcement: Internal framework of 18 ga. 304 stainless steel.

• Insulation: Fiberglass, thermal conductivity (K factor) is .23 at

75˚F. 1-1/2" in doors, base top; 2" in sidewalls.

• Air tunnels: 22 ga. stainless steel; lift-out type, mounted on sides.

• Push/pull handles (4): 5” vertical; recessed.

• Interior coved corners.

BASE:

• One piece construction, .125 aluminum.

• Casters: 5" dia., swivel, modulus tires, 1-1/4 wide, load cap.

250 lbs. each, temp. range -45˚/+180˚F. Delrin bearings. Front

PAN DIM "A" DIM "B" DIM "C" INSIDE DIMENSIONS

CAP/

12

SETS

SIZE WIDTH DEPTH HEIGHT WIDTH DEPTH HEIGHT

SEE NOTE

BELOW

IN 28-3/4 34-5/8 73-1/2 22 26-7/8 58 LBS 283

MM 730 880 1865 560 685 1475 KG 128

HOT UNIT COMPONENTS:

• Thermostat: Solid state digital display control, room ambient to

200˚F (93˚C).

• Switch: ON-OFF push button type.

• Power cord: Permanent, 10 ft., 12/3 ga.

• Heater: 1850 Watts.

• Blower motor.

• Vent Fan.

• Thermometer: Digital.

POWER REQUIREMENTS:

• 2000 Watts, 120 Volts, 60 Hz., single phase, 16 Amps., 20 Amp.
service.

"B"

Gold indicates our Best Insulated
Hot Cabinets with the best warranty
in the industry.
3-Year Parts / 1-Year Labor.

casters equipped with brakes.

DUTCH DOORS:

• Field reversible.

• Formed 22 ga. stainless steel.

• Latches: Chrome plated zinc, high temperature ceramic
magnetic type, mounted inboard.

• Transport Latches.

• Hinges: Heavy duty chrome plated zinc.

• Gaskets: Perimeter type, silicone.

• Pan stops: Embossed.

PAN SLIDES:

• Wire angles (.306 dia.), nickel chrome plated steel, mounted on
lift-off posts.

• Spaced on 4-1/2" centers; adjustable on 1-1/2" centers.

Cres Cor Insulated Hot Cabinet Model H-137-PSUA-12D.
Solid state electronic controlled time and temperatures.
Cabinet 22 ga. stainless steel; stainless steel internal
frame. (12) sets wire universal angles for multiple pan
sizes, adjust able spacing every 1-1/2". Field reversible
Dutch doors, 22 ga. stainless steel. Fiberglass insulation
in sides, 2"; doors, base, top 1-1/2". Interior coved
corners. 2000 Watt, 120 Volt power unit. One piece
insulated base, .125 aluminum. 5" swivel modulus

SHORT FORM SPECIFICATIONS

casters, Delrin bearings. Load capacity 250 lbs. each.
3-Year Parts / 1-Year Labor warranty. Provide the
following accessories: . NSF, CSA-US,

CSA-C listed.

WEIGHT

ACT.

In line with its policy to continually improve its products,

5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: [phone]

www.crescor.com

© Crescent Metal Products, Inc. 2014 All rights reserved. Litho in U.S.A.

CRES COR reserves the right to change materials and

specications without notice.