Cres Cor H-135-WSUA-11R User Manual

INSULATED

AQUATEMP™ HOT CABINET

MODEL H-135-WSUA-11R

FEATURES AND BENEFITS:

• Fully insulated holding cabinet keeps prepared
foods at serving temperatures.

• Powerful, yet efcient, 2000 Watt heating system
maintains the right combination of heat and
humidity to properly hold products.

• Humidity system allows you to regulate humidity
levels by controlling air temperatures to 200°F (93°C).
Lowering air temperatures allows for humidity up to
95%

JOB:

ITEM NO:

• Integral drip trough on front keeps trafc area dry,
safer.

• Internal frame in body maintains structural rigidity.

• Body constructed of non-corrosive, stainless steel
for strength and ease of cleaning.

• Insulated Dutch doors prevent temperature loss;
door gaskets for proper seal. Field reversible for

exibility.

• Standard with right hand hinging; left hand hinging
available upon request.

• Recessed push/pull handles on both sides prevent
damage to walls; allows easy maneuvering.

• Safety-conscious anti-microbial latches reduce the
spread of germs.

• Eleven sets of wire universal angles accommodate
a large variety of pan sizes on adjustable 1-1/2"
centers.

• Slanted control panel has easy-to-read
thermometer; digital thermometer available upon
request. Entire assembly removable for cleaning
and maintenance.

• Heavy duty 5" swivel casters, two with brakes.
Provides mobility when fully loaded.

H-135-WSUA-11-R

®

SANITATION

NSF/ANSI 4

ACCESSORIES and OPTIONS
(Available at extra cost):

q Full View Window Door

q Aluminum Powder Coat Doors

q Extra Universal Angles

q Corner Bumpers

q Perimeter Bumper

q Push Handle

q 208 or 240 Volt Service

q Food Safe Digital Thermometer

See page B-20 for accessory details.

C US

®

5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: [phone]

www.crescor.com

Page B-9.2

Jan., 2014

H-135-WSUA-11

G

6-20P

B

A

G

B

C

W

5-20P

CRES COR

MODEL NO.

H-135-WSUA-11

CAP/ANGLES

PAN DIM "A" DIM "B" DIM "C" INSIDE DIMENSIONS

SIZE WIDTH DEPTH HEIGHT WIDTH DEPTH HEIGHT

11

SETS

SEE NOTE

BELOW

IN 25-3/4 33-1/2 69-3/4 21-3/4 27 54 LBS 225

MM 655 850 1775 555 690 1375 KG 102

NOTES: 1. Pan sizes 22" x 20" (560 x 510) Roast & Bake Pans, 10" x 20" (255 x 510) Roast & Bake Pans, 18" x 26" (460 x 660)

Bun Pans, 14" x 18" (355 x 460) Service Trays, 12" x 20" (305 x 510) Steam Table Pans.
Refer to Pan Size Chart at end of section.

2. When ordering bumpers, add 2" to overall dimensions.

CABINET:

• Body: 22 ga. stainless steel.

• Reinforcement: Internal framework of .100 aluminum.

• Insulation: Fiberglass, thermal conductivity (K factor) is .23 at

75˚F, 1" insulation in sidewalls and doors, 1-1/2" in top and back.

• Air tunnel: 22 ga. stainless steel; lift-out type, mounted on back
panel.

• Push/pull handles (2): Black plastic; 5-1/2” vertical; recessed.

BASE:

• Full base construction, .125 aluminum.

• Casters: 5" dia., swivel, modulus tires, 1-1/4 wide, load cap.

250 lbs. each, temp. range -40˚/+180˚F. Delrin bearings. Front

casters equipped with brakes.

DUTCH DOORS:

• Field reversible.

• Formed 20 ga. stainless steel.

• Gaskets: Perimeter type, silicone rubber.

• Latches: Magnetic type with anti-microbial pull handle.

• Hinges (4): Chrome plated high-pressure cast zinc.

PAN SLIDES:

• Wire angles (.306 dia.) nickel chrome plated steel, mounted on
lift off posts.

• Spaced on 4-1/2" centers; adjustable on 1-1/2" centers.

HOT UNIT COMPONENTS:

• Removable bottom mount hot unit.

• Body: Formed .063 aluminum with black control panel.

• Thermostat (holding): Electro-mechanical, room ambient to
200°F (93°C).

• Thermostat (humidity): Electro-mechanical, room ambient to 95%.

• Pilot light.

• Switch: ON-OFF rocker type.

• Power cord: Permanent, 6 ft., 14/3 ga. with molded right angle plug.

• Heaters (2): 960 Watts for holding.

• Blower motor.

• Thermometer.

• Water pan: 3-1/2 quart; 22 ga. 304 stainless steel with 960 Watt
heater for humidity.

POWER REQUIREMENTS:

• 2000 Watts, 120 Volts, 60 Hz., single phase, 16 Amps., 20 Amp.
service.

SHORT FORM SPECIFICATIONS

Cres Cor Insulated Holding Cabinet Model H-135-WSUA-11.
Inner, outer and top liners of 22 ga. stainless steel.
(11) sets wire angles for multiple pan sizes, adjust able
spacing every 1-1/2". Field reversible Dutch doors, 20

ga. stainless steel. Insulated with 1-1/2” berglass in top

and back, 1" in sidewalls and doors. Removable 2000
Watt, 120 Volt power unit. Full base, .125 aluminum. 5"
swivel modulus casters, Delrin bearings. Load capacity
250 lbs. each. 2-Year Parts / 1-Year Labor warranty.

Provide the following accessories: ____ _____ _____
CSA-US, CSA-C, CSA to NSF4 listed.

WEIGHT

ACT.

In line with its policy to continually improve its products,

5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: [phone]

www.crescor.com

© Crescent Metal Products, Inc. 2014 All rights reserved. Litho in U.S.A.

CRES COR reserves the right to change materials and

specications without notice.