Cres Cor H-135-SUA-11R User Manual

INSULATED

HOT CABINET

MODEL H-135-SUA-R Series

FEATURES AND BENEFITS:

• Fully insulated holding cabinet keeps prepared
foods at serving temperatures.

• Powerful, yet efcient, 1500 Watt heating system
maintains the right temperature to properly hold

products. Heats up to 200˚F (93˚C).

• Internal frame in body maintains structural rigidity.

• Body constructed of non-corrosive, stainless steel
for strength and ease of cleaning. Extended base
protects cabinet body.

JOB:

ITEM NO:

• Insulated doors prevent temperature loss; door
gaskets for proper seal. Field reversible for

exibility.

• Standard with right hand hinging; left hand hinging
available upon request.

• Recessed push/pull handles on both sides prevent
damage to walls; allows easy maneuvering.

• Safety-conscious anti-microbial latches reduce
the spread of germs.

• Wire universal angles accommodate a large

variety of pan sizes on adjustable 1-1/2" centers.

• Slanted control panel has easy-to-read
thermometer; digital thermometer available upon
request. Entire assembly removable for cleaning
and maintenance.

• Heavy duty 5" swivel casters, two with brakes.
Provides mobility when fully loaded.

H-135-SUA-11-R

(Shown)

®

SANITATION

NSF/ANSI 4

ACCESSORIES and OPTIONS
(Available at extra cost):

q Full View Window Door

q Aluminum Doors

q Extra Universal Angles

q Corner Bumpers

q Perimeter Bumper

q Push Handle

q 208 or 240 Volt Service

C US

®

5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: [phone]
www.crescor.com

q Food Safe Digital Thermometer

See page B-20 for accessory details.

Page B-9.1R

Dec., 2015

H-135-SUA-R

CRES COR

MODEL NO.

H-135-SUA-11-R

H-135-SUA-9-R

CAP/ANGLES

PAN DIM "A" DIM "B" DIM "C" INSIDE DIMENSIONS

SIZE WIDTH DEPTH HEIGHT WIDTH DEPTH HEIGHT

11

SETS

9

SETS

SEE NOTE

BELOW

SEE NOTE

BELOW

IN 25-3/4 33-1/2 69-3/4 21 27 54 LBS 225

MM 655 850 1775 533 690 1375 KG 102

IN 25-3/4 33-1/2 57-1/4 21 27 42-1/8 LBS 195

MM 655 850 1455 533 690 1070 KG 88

NOTES: 1. Pan sizes 22" x 20" (560 x 510) Roast & Bake Pans, 10" x 20" (255 x 510) Roast & Bake Pans, 18" x 26" (460 x 660)

Bun Pans, 14" x 18" (355 x 460) Service Trays, 12" x 20" (305 x 510) Steam Table Pans.

Refer to Pan Size Chart at end of section.

2. When ordering bumpers, add 2" to overall dimensions.

CABINET:

• Body: 22 ga. stainless steel.

• Reinforcement: Internal framework of .100 aluminum.

• Insulation: Fiberglass, thermal conductivity (K factor) is .23 at

75˚F, 1" insulation in sidewalls and doors, 1-1/2" in top and back.

• Air tunnel: 22 ga. stainless steel; lift-out type, mounted on back panel.

• Push/pull handles (2): Black plastic; 5-1/2” vertical; recessed.

BASE:

• Full base construction, .125 aluminum.

• Casters: 5" dia., swivel, modulus tires, 1-1/4 wide, load cap.

250 lbs. each, temp. range -40˚/+180˚F. Delrin bearings. Front

casters equipped with brakes.

DOOR(S):

• Field reversible.

• Formed 20 ga. stainless steel.

• Gasket(s): Perimeter type, silicone rubber.

• Latche(s): Magnetic type with anti-microbial pull handle.

• Hinges (2) or (4): Chrome plated high-pressure cast zinc.

PAN SLIDES:

• Wire angles (.306 dia.) nickel chrome plated steel, mounted on

lift off posts.

• Spaced on 4-1/2" centers; adjustable on 1-1/2" centers.

HOT UNIT COMPONENTS:

• Removable bottom mount hot unit.

• Body: Formed .063 aluminum with black control panel.

• Thermostat: Electro-mechanical, room ambient to 200˚F. (93˚C.).

• Pilot light.

• Switch: ON-OFF rocker type.

• Power cord: Permanent, 6 ft., 14/3 ga. with molded right angle

plug.

• Heater: 1470 Watts.

• Blower motor.

• Thermometer.

POWER REQUIREMENTS:

• 1500 Watts, 120 Volts, 60 Hz., single phase, 12.6 Amps., 15

Amp. service.

SHORT FORM SPECIFICATIONS

Cres Cor Insulated Holding Cabinet Model

H-135-SUA-__-R. Inner, outer and top liners of 22 ga.
stainless steel. (__) sets wire angles for multiple pan
sizes, adjust able spacing every 1-1/2". Field reversible
Door(s), 20 ga. stainless steel. Insulated with 1-1/2”
berglass in top and back, 1" in sidewalls and doors.
Removable 1500 Watt, 125 Volt power unit. Full
base, .125 aluminum. 5" swivel modulus casters,
Delrin bearings. Load capacity 250 lbs. each. 2-Year
Parts / 1-Year Labor warranty. Provide the following
accessories: ____ _____ _____ CSA-US, CSA-C,

CSA to NSF4 listed.

WEIGHT

ACT.

In line with its policy to continually improve its products,

5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: [phone]
www.crescor.com

© Crescent Metal Products, Inc. 2015 All rights reserved. Litho in U.S.A.

CRES COR reserves the right to change materials and

specications without notice.