INSULATED HEATED
STAINLESS STEEL BANQUET CABINET
MODEL EB-64
FEATURES AND BENEFITS:
• Fully insulated banquet cabinet designed to
transport and hold (64) 11" plated covered
meals.
• Supplied with four heavy-duty wire grid shelves
spaced on 13-1/2" centers
• Bottom mounted power unit lifts out for easy
cleaning.
JOB:
ITEM NO:
• Standard 1500 Watts, 120 Volts, 15 Amps.
Provides quick heat up to 200°F (93°C).
• Recessed push/pull handles on both sides
prevent damage to walls; allows easy
maneuvering.
• One piece welded base with perimeter bumper
provides solid foundation to support heavy
loads.
• Heavy duty 6" wheels, two swivel with brakes.
Rolls easily, even over carpeted surfaces.
Staggered mounting provides mobility when
fully loaded especially over uneven surfaces.
• Multiple options and accessories to best t your
needs.
• Magnetic grease board included.
(Shown with accessory options)
®
SANITATION
NSF/ANSI 4
ACCESSORIES and OPTIONS
(Available at extra cost):
q Gravity Transport Latch
q Humidity Pan
q Sterno Drawers
q Left Hand Hinged Door
q 6" Polyurethane Caster
q Adjustable Shelves
q Pigtail Coil Cord (120 Volt)
q 208/240 Volt Service
See page F-4 for accessory details.
EB-64
®
C US
5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: 440/350-7267
www.crescor.com
Page F-2.5
Feb., 2015
A
EB-64
B
C
CRES COR
MODEL NO.
EB-64
*Door opening 23 X 54-3/8 (585 X 1380).
Capacity based on covered plate dia. with nesting height of 3" for plate and cover.
MEAL CAPACITY
COVERED PLATE DIA.
11" 12" 13" WIDTH DEPTH HEIGHT WIDTH DEPTH HEIGHT
64 48 32
CABINET:
• Body: 20 ga. stainless steel.
• Reinforcement: Internal framework of 14 ga. 300 series stainless
steel.
• Insulation: Fiberglass, thermal conductivity (K factor) is .23 at
75˚F. 1-1/2” in back wall, side walls, door; 2" in top.
BASE:
• One piece construction, .190 aluminum, welded.
• Casters: 6" dia., rubber tires, 2-1/8" wide, load cap. 350 lbs.
each, temp. range -40˚/+160˚F. Zerk ttings in hub. Four swivel
type, two equipped with brakes.
• Perimeter bumper: Gray, non-marking rubber, 1 x 1.
DOORS:
• Formed 20 ga. magnetic stainless steel.
• Latches: Polished stainless steel, slam type; mounted inboard.
• Door gaskets: Perimeter type, silicone.
• Hinges: 11 ga. stainless steel, butt type.
DIM “A” DIM “B” DIM “C” INSIDE DIMENSIONS*
28-5/8 30-5/16 68-5/16 IN 23 24-1/4 58-7/16 LB 260
725 770 1735 MM 585 615 1485 KG 118
SHELVES:
Four shelves. Each shelf made up of nickel chrome plated heavy
duty wire grids. Shelves xed on 13-1/2" (345 mm) centers.
13" clearance between shelves. 12" clearance for top shelf.
HOT UNIT COMPONENTS:
• Removable without tools.
• Body: Formed 20 ga. non-magnetic stainless steel
• Thermostat: Electro-mechanical, ambient to 200˚F (93˚C).
• Thermometer: Analog type.
• Switch: ON-OFF rocker type, lighted
• Power cord: Permanent, 10 ft., 14/3 ga. with molded plug.
• Heater (1): 1500 Watt.
• Blower motor.
POWER REQUIREMENTS:
• 1500 Watts, 120 Volts, 60 Hz., single phase, 13.8 Amps., 15 Amp.
service.
WEIGHT
ACT.
SHORT FORM SPECIFICATIONS
Top View
11"
11" Covered Plate Conguration
stacked four shelves 4 plates high.
5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: 440/350-7267
www.crescor.com
© Crescent Metal Products, Inc. 2015 All rights reserved. Litho in U.S.A.
Cres Cor Heated Banquet Cart Model EB-64. Removable
20 ga. non-magnetic stainless steel bottom mounted
power unit, 1500 Watts, 120 Volts, 60 Hz, single
phase, 15 Amp service. Cabinet 20 ga. stainless steel,
aluminized steel internal frame. Fiberglass insulation
in sides 2”, back, door and base 1-1/2”. Recessed side
push handles. Four xed shelf positions with nickel
chrome plated wire grids. Capacity 64 covered meals.
Base one piece .190 aluminum, welded and nished,
perimeter bumper. Six inch cushion balloon casters with
zerk ttings. Load capacity 350 lbs. each. 2-Year parts /
1-Year labor warranty. Provide the following accessories:
. CSA-US, CSA-C, CSA to NSF4 listed, ENERGY STAR
Qualied.
In line with its policy to continually improve its products,
CRES COR reserves the right to change materials and
specications without notice.
Loading...