Cres Cor CO-151-HW-UA-6D User Manual

JOB:

ITEM NO:

AQUATEMP™/ROAST-N-HOLD

GENTLE CONVECTION OVEN

MODEL CO-151-HW-UA-6D (HALF SIZE)

FEATURES AND BENEFITS:

• Roast, cook, bake, reheat and hold with precise temperature and
humidity control. Slow convected air system promotes natural
browning for flavor and seals in natural juices.

• Moist heat, dry heat or a combination of both allows for a variety of
food preparation and holding.

• Full 4950 Watts of power allows for reheating of prepared meals or

bulk items. Maximum temperature 350˚F. (176.5˚C.).

• Standard 1850 Watt water heater with automatic water fill system and
low water indicator. LED and water heater shut off when water is at
critically low level.

• Standard solid state electronic control with large, clean, easy-to-read
and operate LED digital display to ensure holding at precise food
temperatures.

• 18 factory or field programmed retherm & hold cycles. Each
programmed menu can be customized for exact time and
temperature needs.

• AquaTemp system maintains optimum food texture through
continuous monitoring of both temperature and humidity.
Temperature and humidity values are measured, displayed and
controlled through intuitive solde state controller. Air temperature is
prioritized over humidity to ensure food safety.

• Standard with probe cooking, includes one 6" food
temperature probe.

• Roast and hold over 120 lbs. (54 kg.) of meat in just 7 sq. ft. of floor
space.

• Non-venting oven, permitted by most local codes, provides easy,
inexpensive installation.

• Stainless steel construction throughout for ease of cleaning. Smooth
interior coved corners prevent food particle/grease buildup.

• Field reversible insulated door prevents temperature loss. Silicone
door gasket for proper seal. High temperature ceramic magnetic latch
for “easy open” and security during transport.

• Safety conscious anti-microbial latch protects against spreading
germs. Standard with right hand hinging; left hand hinging available
upon request.

• Non-corrosive stainless steel wire universal angles accommodate a
large variety of pan sizes on adjustable 1-1/2" spacing. Supplied with
six sets of angles and three raised wire grids.

• Heavy duty 5" swivel casters, two with brakes. Provides mobility
when fully loaded.

™

®

C US

CO-151-HW-UA-6D

New, easier to use, easy-to-read and operate

LED digital display ensures holding at precise

food temperatures and moisture content.

ACCESSORIES and OPTIONS
(Available at extra cost):

q Security Panel for Controls

q Key Lock Latch

q Extra Universal Angles

q Extra Wire Grids

q Side and Rear Bumpers

q 1-1/2" Food Temperature Probe

q HACCP Documentation (built-in USB port)

POWER UNIT OPTIONS:

4950 Watts, 208 Volts, 1 Phase, 60 Hz.
4950 Watts, 240 Volts, 1 Phase, 60 Hz.
4950 Watts, 208 Volts, 3 Phase, 60 Hz.
4950 Watts, 240 Volts, 3 Phase, 60 Hz.

5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: [phone]

www.crescor.com

See page E-10 for accessory details.

Page E-4.1A

Jan., 2014

CO-151-HW-UA-6D

5-1/8

4"

4-1/2

"B"

DETAIL OF
PAN SLIDE

CRES COR

MODEL NO.

CO-151-HW-UA-6D

Note: Refer to pan size chart at end of section.

CAP/ANGLES

SETS

CABINET:

• Body: 22 ga. stainless steel.

• Reinforcement: Internal framework of 16 ga. stainless steel.

• Insulation: Fiberglass, thermal conductivity (K factor) is .23 at

75˚F. 1-1/2" in back wall, doors, base; 2" in side walls.

• Water pan: 4 Gallons; 16 ga. stainless steel with 1850 Watt

heater and with petcock drain; mounted to base.

• Air tunnels: 20 ga. stainless steel, lift-out type, mounted on side walls.

• Interior coved corners

• Automatic water ll hook-up under base.

• Work top: 18 ga., stainless steel.

BASE:

• One piece construction, .125 aluminum.

• Drip trough: Formed 18 ga. stainless steel; mounted to lower
front of cabinet.

• Casters: 5" dia., swivel, modulus tires, 1-1/4 wide, load cap.

250 lbs. each, temp. range -45˚/+180˚F. Delrin bearings. Front

casters equipped with brakes.

DOOR:

• Field reversible.

• Formed 22 ga. stainless steel.

• Latch: Chrome plated zinc with composite handle, ceramic
magnetic type.

• Hinges: Heavy duty chrome plated zinc.

• Pan stop: Embossed.

PAN SLIDES:

• Stainless steel wire universal angles (.306 dia.) mounted on lift-
out posts.

• (6) sets of angles adjustable on 1-1/2" centers.

• Grids (3): Nickel chrome plated steel, raised wire 17" x 25".

POWER REQUIREMENTS AVAILABLE:

• 4950 Watts, 208 Volts, 60 Hz., 1 phase, 24 Amps., 30 Amp. service.

• 4950 Watts, 240 Volts, 60 Hz., 1 phase, 21 Amps., 30 Amp. service.

• 4950 Watts, 208 Volts, 60 Hz., 3 phase, 15 Amps., 20 Amp. service.

• 4950 Watts, 240 Volts, 60 Hz., 3 phase, 13 Amps., 20 Amp. service.

PAN DIM "A" DIM "B" DIM "C" INSIDE DIMENSIONS

SIZE WIDTH DEPTH HEIGHT WIDTH DEPTH HEIGHT

6

SEE NOTE

BELOW

IN 28-3/4 37-3/4 43-3/4 21-1/4 26-1/2 28 LBS 260

MM 730 960 1115 540 675 715 KG 118

"A"

G

"C"

40"

ELECTRICAL COMPONENTS:

• Thermostat (roast/hold): Solid state digital control, 140°F to 350˚F
(176.5˚C).

• Thermostat (humidity): Solid state digital control, room ambient
to 95%.

• Switch: ON-OFF push button type.

• Thermometer: Digital.

• Power cord: Permanent, 6 ft., 10 ga. with right angle plug.

• Air heaters (6): 735 Watts each.

• Water heater: 1850 Watts.

• Blower motors (4).

• Vent fans (3).

• Fuses (2): 6 amp.

INSTALLATION REQUIREMENTS:

• Check local vent hood codes for mobile Roast-N-Hold ovens.

SHORT FORM SPECIFICATIONS

Cres Cor AquaTemp Roast-N-Hold Convection Oven Model

CO-151-HW-UA-6D. 18 ga. stainless steel, recessed

control panel with digital thermostats. Cabinet 22 ga.
stainless steel. Stainless steel internal frame; coved corner

interior. 16 ga. stainless steel water reservoir, 4 gallon

capacity. Fiberglass insulation in sides 2”; back, door and
base 1-1/2”. 22 ga. stainless steel door, high temperature

anti-microbial magnetic latch, heavy duty hinges. (6) sets

universal angles for multiple pan sizes and spacing. One
piece base .125 aluminum. 5" swivel modulus casters,
Delrin bearings. Load capacity 250 lbs. each. 4950 Watts,

_____ Volts, 60 Hz., ____ Phase. 2-Year Parts / 1-Year

Labor warranty. Provide the following accessories: ______
______ ______. CSA-US, CSA-C, CSA to NSF4 listed.

6-30P

YXG

Z

L15-20P

WEIGHT

ACT.

In line with its policy to continually improve its products,

5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: [phone]

www.crescor.com

© Crescent Metal Products, Inc. 2014 All rights reserved. Litho in U.S.A.

CRES COR reserves the right to change materials and

specications without notice.