JOB:
ITEM NO:
ROAST-N-HOLD
GENTLE CONVECTION OVEN
MODEL CO-151-HUA-6D (HALF SIZE)
FEATURES AND BENEFITS:
• Fully insulated half size Roast-N-Hold gentle convection oven
designed for flavorful results by slow roasting.
• Slow convected air system promotes natural browning for flavor
and seals in natural juices. Slow roasting means 15% to 20%
less shrinkage.
• Efficient 4700 Watt power unit allows for reheating of prepared
meals or bulk items. Maximum temperature 350˚F. (176.5˚C.).
• Standard solid state electronic control with large, clean,
easy-to-read and operate LED digital display to ensure holding
at precise food temperatures.
• 18 factory or field programmed retherm & hold cycles. Each
programmed menu can be customized for exact time and
temperature needs.
• Roast and hold over 120 lbs. (54 kg.) of meat in just 6 sq. ft. of
floor space.
• Non-venting oven, permitted by most local codes, provides easy,
inexpensive installation.
• Standard with probe cooking. Includes one 6" food temperature
probe.
• Stainless steel construction throughout for ease of cleaning.
• Smooth interior coved corners prevent food particle/grease
buildup.
• Field reversible insulated door prevents temperature loss.
Silicone door gasket for proper seal. High temperature ceramic
magnetic latch for “easy open” and security during transport.
• Safety conscious anti-microbial latch protects against spreading
germs. Standard with right hand hinging; left hand hinging
available upon request.
• Chrome plated wire universal angels accommodate a large
variety of pan sizes on adjustable 1-1/2" spacing.
Supplied with six sets of angels and three raised wire grids.
• Heavy duty 5" swivel casters, two with brakes. Provides mobility
when fully loaded.
• Ovens can be stacked for flexibility.
POWER UNIT OPTIONS:
4700 Watts, 208 Volts, 1 Phase, 60 Hz.
4700 Watts, 240 Volts, 1 Phase, 60 Hz.
4700 Watts, 208 Volts, 3 Phase, 60 Hz.
4700 Watts, 240 Volts, 3 Phase, 60 Hz.
™
®
C US
CO-151-HUA-6D
New, easier to use, easy-to-read and operate
LED digital display ensures holding at precise
food temperatures and moisture content.
ACCESSORIES and OPTIONS
(Available at extra cost):
q Stacking Kit
q Security Panel for Controls
q Tempered Glass Door Window
q Key Lock Latch
q Extra Universal Angles
q Extra Wire Grids
q Perimeter Bumper
q Corner Bumpers
q 1-1/2" Food Temperature Probe
q Various Caster Options
q HACCP Documentation (built in USB port)
5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: 440/350-7267
www.crescor.com
See page E-10 for accessory details.
Page E-4.1
Nov., 2013
CO-151-HUA-6D
5-1/8
4"
4-1/2
"B"
DETAIL OF
PAN SLIDE
CRES COR
MODEL NO.
CO-151-HUA-6D
CO-151-HUA-6D
(Stacked)
Note: Refer to pan size chart at end of section.
*Inside dimensions for each compartment.
CAP/ANGLES
SETS
SETS
CABINET:
• Body: 22 ga. stainless steel.
• Reinforcement: Internal framework of 16 ga. stainless steel.
• Insulation: Fiberglass, thermal conductivity (K factor) is .23 at
75˚F. 1-1/2" in back wall, door, base; 2" in side walls.
• Air tunnels: 20 ga. stainless steel, lift-out type, mounted on sides.
• Work Top: 18 ga., stainless steel.
• Interior coved corners.
BASE:
• One piece construction, .125 aluminum.
• Casters: 5" dia., swivel, modulus tires, 1-1/4 wide, load cap.
250 lbs. each, temp. range -45˚/+180˚F. Delrin bearings. Front
casters equipped with brakes.
DOOR:
• Field reversible.
• Formed 22 ga. stainless steel.
• Latch: Chrome plated zinc with composite handle,
ceramic magnetic type.
• Hinges: Heavy duty chrome plated zinc.
• Gasket: Perimeter type, silicone.
• Pan stop: Embossed.
PAN SLIDES:
• Wire angles (.306 dia.), nickel chrome plated; mounted
on lift-out posts.
• (6) sets of angles adjustable on 1-1/2" centers.
• Grids (3): Nickel chrome plated steel, raised wire 17" x 25".
POWER REQUIREMENTS AVAILABLE:
• 4700 Watts, 208 Volts, 60 Hz., 1 phase, 24 Amps., 30 Amp. service.
• 4700 Watts, 240 Volts, 60 Hz., 1 phase, 20 Amps., 30 Amp. service.
• 4700 Watts, 208 Volts, 60 Hz., 3 phase, 13 Amps., 20 Amp. service.
• 4700 Watts, 240 Volts, 60 Hz., 3 phase, 12 Amps., 20 Amp. service
PAN DIM "A" DIM "B" DIM "C" INSIDE DIMENSIONS*
SIZE WIDTH DEPTH HEIGHT WIDTH DEPTH HEIGHT
6
12
SEE NOTE
BELOW
SEE NOTE
BELOW
IN 28-3/4 37-3/4 43-3/4 21-1/4 26-1/2 28 LBS 260
MM 730 960 1115 540 675 715 KG 118
IN 28-3/4 37-3/4 80-1/4 21-1/4 26-1/2 28 LBS 522
MM 730 960 2035 540 675 715 KG 237
"A"
G
"C"
40"
ELECTRICAL COMPONENTS:
• Thermostat (roast/hold): Solid state digital control, 140°F to 350˚F
(176.5˚C).
• Switch: ON-OFF push button type.
• Thermometer: Digital.
• Power cord: Permanent, 6 ft., 10 ga. with right angle plug.
• Heaters (6): 735 Watts each.
• Blower motors (4).
• Vent fans (3).
• Fuses (2): 6 Amp.
• Probe (1): 6" stainless steel.
INSTALLATION REQUIREMENTS:
• Check local vent hood codes for mobile Roast-N-Hold ovens.
SHORT FORM SPECIFICATIONS
Cres Cor Roast-N-Hold Half Size Convection Oven Model
CO-151-HUA-6D. 18 ga. stainless steel, recessed control
panel with digital thermostat. Cabinet and door 22 ga.
stainless steel; stainless steel internal frame; coved corner
interior. Fiberglass insulation in sides 2”; back, doors and
base 1-1/2”. High temperature anti-microbial magnetic
latch. (6) sets universal angles for multiple pan sizes and
spacing. One piece base .125 aluminum. 5" swivel
modulus casters, Delrin bearings. Load capacity 250
lbs. each. 4700 Watts, Volts, 60 Hz.,
Phase. 2-Year Parts / 1-Year Labor warranty. Provide the
following accessories: . CSA-US, CSA-C,
CSA to NSF4 listed.
6-30P
X
Y
G
Z
L15-20P
WEIGHT
ACT.
In line with its policy to continually improve its products,
5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: 440/350-7267
www.crescor.com
© Crescent Metal Products, Inc. 2013 All rights reserved. Litho in U.S.A.
CRES COR reserves the right to change materials and
specications without notice.
Loading...