Cres Cor CO-151-H-189D-STK User Manual

JOB:
ITEM NO:
ROAST-N-HOLD
STACKED CONVECTION OVENS
MODEL CO-151-H-189D-STK
FEATURES AND BENEFITS:
• Stacked ovens with two separate compartments and controls permit menu flexibility. Fully insulated Roast-N-Hold gentle convection oven designed for flavorful results by slow
roasting.
• Slow convected air system promotes natural browning for flavor and seals in natural juices. Slow roasting means 15% to 20% less shrinkage.
• Efficient 4700 Watt power unit allows for reheating of prepared
meals or bulk items. Maximum temperature 350˚F. (176.5˚C.).
• Standard solid state electronic control with large, clean, easy­to-read and operate LED digital display to ensure holding at precise food temperatures.
• 18 factory or field programmed retherm & hold cycles. Each programmed menu can be customized for exact time and temperature needs.
• Roast and hold over 240 lbs. (108 kg.) of meat in just 6 sq. ft. of floor space.
• Standard with probe cooking, includes one 6" food temperature probe.
• Non-venting oven, permitted by most local codes, provides easy, inexpensive installation.
• Stainless steel construction throughout for ease of cleaning.
• Smooth interior coved corners prevent food particle/grease buildup.
• Field reversible insulated doors prevent temperature loss. Silicone door gaskets for proper seal. High temperature ceramic magnetic latches for “easy open” and security during transport.
• Safety conscious anti-microbial latches protect against spreading germs. Standard with right hand hinges; left hand hinging available upon request.
• Channel pan slides securely hold 18" x 26" pans on 3" centers without tipping. Provides added strength. Supplied with six raised wire grids.
• Heavy duty 5" swivel casters, two with brakes. Provides mobility when fully loaded.
POWER UNIT OPTIONS:
4700 Watts, 208 Volts, 1 Phase, 60 Hz. 4700 Watts, 240 Volts, 1 Phase, 60 Hz. 4700 Watts, 208 Volts, 3 Phase, 60 Hz. 4700 Watts, 240 Volts, 3 Phase, 60 Hz.
®
C US
CO-151-H-189D-STK
New, easier to use, easy-to-read and operate
LED digital display ensures holding at precise
food temperatures and moisture content.
ACCESSORIES and OPTIONS (Available at extra cost):
q Tempered Glass Door Window
q Key Lock Latches
q Extra Wire Grids
q Perimeter Bumper
q Corner Bumpers
q 1-1/2" Food Temperature Probe
q 6" Dia. Casters
q Polyurethane Casters
q HACCP Documentation (built in USB port)
See page E-10 for accessory details.
www.crescor.com
Page E-4A
Jan., 2014
5/8"
3"
"B"
4"
"A"
"C"
CO-151-H-189D-STK
36"
G
6-30P
1-1/2"
DETAIL OF PAN SLIDE
CRES COR
MODEL NO.
CO-151-H-189D-STK
When ordering bumpers, add 2" to overall dimensions.
CABINETS:
• Bodies: 22 ga. stainless steel.
• Reinforcements: Internal framework of 16 ga. stainless steel.
• Insulation: Fiberglass, thermal conductivity (K factor) is .23 at
75˚F. 1-1/2" in back wall, doors, base; 2" in side walls.
• Air tunnels: 20 ga. stainless steel, lift-out type, mounted on sides.
• Interior coved corners.
BASE:
• One piece construction, .125 aluminum.
• Casters: 5" dia., swivel, modulus tires, 1-1/4 wide, load cap.
250 lbs. each, temp. range -45˚/+180˚F. Delrin bearings. Front
casters equipped with brakes.
DOORS:
• Field reversible.
• Formed 22 ga. stainless steel.
• Latches: Chrome plated zinc with composite handle, ceramic magnetic type.
• Hinges: Heavy duty chrome plated zinc.
• Gaskets: Perimeter type, silicone.
• Pan stops: Embossed.
PAN SLIDES:
• 18 ga. stainless steel channels riveted on 3" centers.
• Grids (6): Nickel chrome plated steel, raised wire 17" x 25".
POWER REQUIREMENTS AVAILABLE (each cabinet):
• 4700 Watts, 208 Volts, 60 Hz., 1 phase, 24 Amps., 30 Amp. service.
• 4700 Watts, 240 Volts, 60 Hz., 1 phase, 20 Amps., 30 Amp. service.
• 4700 Watts, 208 Volts, 60 Hz., 3 phase, 13 Amps., 20 Amp. service.
• 4700 Watts, 240 Volts, 60 Hz., 3 phase, 12 Amps., 20 Amp. service
PAN DIM "A" DIM "B" DIM "C" INSIDE DIMENSIONS
CAP
18
SIZE WIDTH DEPTH HEIGHT WIDTH DEPTH HEIGHT
18 X 26 IN 31-1/8 37-3/4 80-1/8 18-1/4 26-1/2 28 LBS 472
460 X 660 MM 795 960 2035 465 675 715 KG 214
40"
YXG
Z
L15-20P
WEIGHT
ACT.
ELECTRICAL COMPONENTS:
(Each cabinet)
Thermostat (roast/hold): Solid state digital control, 140°F to 350˚F (176.5˚C).
• Switch: ON-OFF push button type.
• Thermometer: Digital.
• Power cord: Permanent, 6 ft., 10 ga. with right angle plug.
• Heaters (6): 735 Watts each.
• Blower motors (4).
• Vent fans (3).
• Fuses (2): 6 Amp.
• Probe (1): 6" stainless steel.
INSTALLATION REQUIREMENTS:
• Check local vent hood codes for mobile Roast-N-Hold ovens.
SHORT FORM SPECIFICATIONS
Cres Cor Roast-N-Hold Stacked Convection Ovens Model CO-151-H-189D-STK. Removable power units 18 ga. stainless steel, recessed control panels with digital thermostats. Cabinets and doors 22 ga. stainless steel; stainless steel internal frame; coved corner interiors. Fiberglass insulation in sides 2”; back, doors and base 1-1/2”. High temperature anti-microbial magnetic latches. No-tip channel interior for 18" x 26" pans on 3" centers. One piece base .125 aluminum. 5" swivel modulus casters, Delrin bearings. Load capacity 250 lbs. each. 4700 Watts, Volts, 60 Hz., Phase. 2-Year Parts / 1-Year Labor warranty. Provide the following accessories: . CSA-US, CSA-C, CSA to NSF4 listed.
In line with its policy to continually improve its products,
www.crescor.com
© Crescent Metal Products, Inc. 2014 All rights reserved. Litho in U.S.A.
CRES COR reserves the right to change materials and
specications without notice.
Loading...