JOB:
ITEM NO:
ROAST-N-HOLD
GENTLE CONVECTION OVEN
MODEL CO-151-H-189D (HALF SIZE)
FEATURES AND BENEFITS:
• Fully insulated half size Roast-N-Hold gentle convection oven
designed for flavorful results by slow roasting.
• Slow convected air system promotes natural browning for
flavor and seals in natural juices. Slow roasting means 15% to
20% less shrinkage.
• Efficient 4700 Watt power unit allows for reheating of prepared
meals or bulk items. Maximum temperature 350˚F. (176.5˚C.).
• Standard solid state electronic control with large, clean, easyto-read and operate LED digital display to ensure holding at
precise food temperatures.
• 18 factory or field programmed roast & hold cycles. Each
programmed menu can be customized for exact time and
temperature needs.
• Standard with probe cooking, includes one 6" food temperature
probe.
• Roast and hold over 120 lbs. (54 kg.) of meat in just 6 sq. ft.
of floor space.
• Non-venting oven, permitted by most local codes, provides
easy, inexpensive installation.
• Stainless steel construction throughout for ease of cleaning.
• Smooth interior coved corners prevent food particle/grease
buildup.
• Field reversible insulated door prevents temperature loss.
Silicone door gasket for proper seal. High temperature
ceramic magnetic latch for “easy open” and security during
transport.
• Safety conscious anti-microbial latch protects against
spreading germs. Standard with right hand hinging; left hand
hinging available upon request.
• Channel pan slides securely hold 18" x 26" pans on 3" centers
without tipping. Provides added strength. Supplied with three
raised wire grids.
• Heavy duty 5" swivel casters, two with brakes. Provides
mobility when fully loaded.
• Ovens can be stacked for flexibility.
POWER UNIT OPTIONS:
4700 Watts, 208 Volts, 1 Phase, 60 Hz.
4700 Watts, 240 Volts, 1 Phase, 60 Hz.
4700 Watts, 208 Volts, 3 Phase, 60 Hz.
4700 Watts, 240 Volts, 3 Phase, 60 Hz.
™
®
C US
CO-151-H-189D
New, easier to use, easy-to-read and operate
LED digital display ensures holding at precise
food temperatures and moisture content.
ACCESSORIES and OPTIONS
(Available at extra cost):
q Stacking Kit
q Security Panel for Controls
q Tempered Glass Door Window
q Key Lock Latch
q Extra Wire Grids
q Perimeter Bumper
q Corner Bumpers
q 1-1/2" Food Temperature Probe
q Various Caster Options
q HACCP Documentation (built-in USB port)
See page E-10 for accessory details.
5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: 440/350-7267
www.crescor.com
Page E-4
Mar., 2014
5/8"
3"
1-1/2"
DETAIL OF
PAN SLIDE
"B"
4"
"A"
"C"
CO-151-H-189D
G
6-30P
40"
YXG
Z
L15-20P
CRES COR
MODEL NO.
CO-151-H-189D
When ordering bumpers, add 2" to overall dimensions.
PAN DIM "A" DIM "B" DIM "C" INSIDE DIMENSIONS
CAP
9
SIZE WIDTH DEPTH HEIGHT WIDTH DEPTH HEIGHT
18 X 26 IN 25-3/8 37-3/4 43-3/4 18-1/4 26-1/2 28 LBS 262
460 X 660 MM 645 960 1115 465 675 715 KG 119
CABINET:
• Body: 22 ga. stainless steel.
• Reinforcement: Internal framework of 16 ga. stainless steel.
• Insulation: Fiberglass, thermal conductivity (K factor) is .23 at
75˚F. 1-1/2" in back wall, doors, base; 2" in side walls.
• Air tunnels: 20 ga. stainless steel, lift-out type, mounted on sides.
• Interior coved corners.
• Work Top: 18 ga., stainless steel.
BASE:
• One piece construction, .125 aluminum.
• Casters: 5" dia., swivel, modulus tires, 1-1/4 wide, load cap.
250 lbs. each, temp. range -45˚/+180˚F. Delrin bearings. Front
casters equipped with brakes.
DOOR:
• Field reversible.
• Formed 22 ga. stainless steel.
• Latch: Chrome plated zinc with composite handle, ceramic
magnetic type.
• Hinges: Heavy duty chrome plated zinc.
• Gasket: Perimeter type, silicone.
• Pan stop: Embossed.
PAN SLIDES:
• 18 ga. stainless steel channels riveted on 3" centers.
• Grids (3): Nickel chrome plated steel, raised wire 17" x 25".
POWER REQUIREMENTS AVAILABLE:
• 4700 Watts, 208 Volts, 60 Hz., 1 phase, 24 Amps., 30 Amp. service.
• 4700 Watts, 240 Volts, 60 Hz., 1 phase, 20 Amps., 30 Amp. service.
• 4700 Watts, 208 Volts, 60 Hz., 3 phase, 13 Amps., 20 Amp. service.
• 4700 Watts, 240 Volts, 60 Hz., 3 phase, 12 Amps., 20 Amp. service
WEIGHT
ACT.
ELECTRICAL COMPONENTS:
• Thermostat (roast/hold): Solid state digital control, 140°F to 350˚F
(176.5˚C).
• Switch: ON-OFF push button type.
• Thermometer: Digital.
• Power cord: Permanent, 6 ft., 10 ga. with right angle plug.
• Heaters (6): 735 Watts each.
• Blower motors (4).
• Vent fans (3).
• Fuses (2): 6 Amp.
• Probe (1): 6" stainless steel.
INSTALLATION REQUIREMENTS:
• Check local vent hood codes for mobile Roast-N-Hold ovens.
SHORT FORM SPECIFICATIONS
Cres Cor Roast-N-Hold Half Size Convection Oven
Model CO-151-H-189D. 18 ga. stainless steel, recessed
control panel with digital thermostat. Cabinet and door 22
ga. stainless steel; stainless steel internal frame; coved
corner interior. Fiberglass insulation in sides 2”; back,
doors and base 1-1/2”. High temperature anti-microbial
magnetic latch. No-tip channel interior for 18" x 26" pans
on 3" centers. One piece base .125 aluminum. 5" swivel
modulus casters, Delrin bearings. Load capacity 250 lbs.
each. 4700 Watts, Volts, 60 Hz., ____
Phase. 2-Year Parts / 1-Year Labor warranty. Provide the
following accessories: . CSA-US, CSA-C,
CSA to NSF4 listed.
In line with its policy to continually improve its products,
5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: 440/350-7267
www.crescor.com
© Crescent Metal Products, Inc. 2014 All rights reserved. Litho in U.S.A.
CRES COR reserves the right to change materials and
specications without notice.
Loading...