JOB:
ITEM NO:
ROAST-N-HOLD
GENTLE CONVECTION OVEN
MODEL CO-151-FUA-12D
FEATURES AND BENEFITS:
• Fully insulated Roast-N-Hold gentle convection oven
designed for flavorful results by slow roasting.
• Slow convected air system promotes natural browning for
flavor and seals in natural juices. Slow roasting means
15% to 20% less shrinkage.
• Full 8000 Watts of power allows for reheating of prepared
meals or bulk items. Maximum temperature 350˚F.
(176.5˚C.).
• Standard solid state electronic control with large, clean,
easy-to-read and operate LED digital display to ensure
holding at precise food temperatures.
• 18 factory or field programmed roast & hold cycles. Each
programmed menu can be customized for exact time and
temperature needs.
• Standard with probe cooking, includes one 6" food
temperature probe.
• Non-venting oven, permitted by most local codes,
provides easy, inexpensive installation.
• Stainless steel construction throughout for ease of
cleaning.
• Smooth interior coved corners prevent food particle/
grease buildup.
• Field reversible insulated Dutch doors prevent
temperature loss. Silicone door gaskets for proper seal.
High temperature ceramic magnetic latches for “easy
open” and security during transport.
• Safety conscious anti-microbial latches protect against
spreading germs. Standard with right hand hinging; left
hand hinging available upon request.
• Recessed push/pull handles on both sides prevent
damage to walls; allows easy maneuvering.
• Chrome plated wire universal angles accommodate a
large variety of pan sizes on adjustable 1-1/2" spacing.
Supplied with 12 sets of angles and six raised wire grids.
• Heavy duty 5" swivel casters, two with brakes. Provides
mobility when fully loaded.
POWER UNIT OPTIONS:
8000 Watts, 208 Volts, 1 Phase, 60 Hz.
8000 Watts, 240 Volts, 1 Phase, 60 Hz.
8000 Watts, 208 Volts, 3 Phase, 60 Hz.
8000 Watts, 240 Volts, 3 Phase, 60 Hz.
™
CO-151-FUA-12D
ACCESSORIES and OPTIONS
(Available at extra cost):
q 1-1/2 " Food Temperature Probe
q Security Panel for Controls
q Tempered Glass Door Windows
q Key Lock Latches
q Wire Grids
q Extra Universal Angles
q Perimeter Bumper
q Corner Bumpers
q Various Caster Options
See page E-10 for accessory details.
5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: 440/350-7267
www.crescor.com
Page E-1
Jan., 2013
15-50P
Z
Y
X
G
6-50P
5-1/8
G
4"
CO-151-FUA-12D
A
A
B
ADJ. ON
1-1/2"
B
C
6-50P L15-30P
70"
DETAIL OF
PAN SLIDE
CRES COR
MODEL NO.
ANGLES
CO-151-FUA-12D
NOTES: 1. Pan sizes 22" x 20" (560 x 510) Roast & Bake Pans, 10" x 20" (255 x 510) Roast & Bake Pans, 18" x 26" (460 x 660)
Bun Pans, 14" x 18" (355 x 460) Service Trays, 12" x 20" (305 x 510) Steam Table Pans.
Refer to Pan Size Chart at end of section.
2. When ordering bumpers, add 2" to overall dimensions.
CABINET:
• Body: 22 ga. stainless steel.
• Reinforcement: Internal framework of 18 ga. stainless steel.
• Insulation: Fiberglass, thermal conductivity (K factor) is .23 at
75˚F. 1-1/2" in back wall, doors, base; 2" in side walls.
• Air tunnel: 22 ga. stainless steel, lift-out type, mounted on sides.
• Interior coved corners.
BASE:
• One piece construction, .125 aluminum.
• Casters: 5" dia., swivel, modulus tires, 1-1/4 wide, load cap.
250 lbs. each, temp. range -45˚/+180˚F. Delrin bearings. Front
casters equipped with brakes.
PAN DIM "A" DIM "B" DIM "C" INSIDE DIMENSIONS
CAP/
12
SETS
SIZE WIDTH DEPTH HEIGHT WIDTH DEPTH HEIGHT
SEE NOTE
BELOW
IN 28-3/4 37-3/4 73-11/16 21-3/4 26-7/8 58 LBS 392
MM 730 960 1875 555 685 1475 KG 178
HOT UNIT COMPONENTS:
• Thermostat (roast/hold): Solid state digital control, 140°F to 350˚F
(176.5˚C).
• Switch: ON-OFF push button type.
• Power cord: Permanent, 6 ft., 6 ga. with plug.
• Heaters: 1325 Watts each.
• Blower motors: (4).
• Vent fans: (3).
• Fuses: (2) 6 Amp.
• Probe: (1) 6", stainless steel.
INSTALLATION REQUIREMENTS:
• Check local vent hood codes for mobile Roast-N-Hold ovens.
DUTCH DOORS:
• Field reversible.
• Formed 22 ga. stainless steel.
• Latches: Anti-microbial chrome plated zinc, with composite
handle. Ceramic magnetic type.
• Hinges: Heavy duty chrome plated zinc.
• Gaskets: Perimeter type, silicone.
• Pan stops: Embossed.
PAN SLIDES:
• Chrome plated wire universal angles (.306 dia.), mounted on
lift-out posts.
• 12 sets of angles; adjustable on 1-1/2" centers.
• Grids (6): Nickel chrome plated steel; raised wire 17" x 25".
POWER REQUIREMENTS AVAILABLE:
• 8000 Watts, 208 Volts, 60 Hz., 1 phase, 50 Amp. service.
• 8000 Watts, 240 Volts, 60 Hz., 1 phase, 50 Amp. service
• 8000 Watts, 208 Volts, 60 Hz., 3 phase, 30 Amp. service.
• 8000 Watts, 240 Volts, 60 Hz., 3 phase, 30 Amp. service
Cres Cor Roast-N-Hold Oven Model CO-151-FUA-12D.
18 ga. stainless steel, recessed control panel. Cabinet
and Dutch doors 22 ga. stainless steel; stainless
steel internal frame; coved corner interior. Fiberglass
insulation in sides 2”; back, doors and base 1-1/2”. High
temperature anti-microbial magnetic latches. (12) sets
universal angles for multiple pan sizes and spacing. One
piece base .125 aluminum. 5" swivel modulus casters,
Delrin bearings. Load capacity 250 lbs. each. 8000 Watts,
Volts, 60 Hz., __ Phase. 2-Year Parts / 1-Year Labor
warranty. Provide the following accessories: .
SHORT FORM SPECIFICATIONS
G
X
Y G
Z
WEIGHT
ACT.
In line with its policy to continually improve its products,
5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: 440/350-7267
www.crescor.com
© Crescent Metal Products, Inc. 2012 All rights reserved. Litho in U.S.A.
CRES COR reserves the right to change materials and
specications without notice.
Loading...