Cres Cor CO-151-F-1818DE User Manual

JOB:

ITEM NO:

ROAST-N-HOLD

GENTLE CONVECTION OVEN

MODEL CO-151-F-1818D Series

FEATURES AND BENEFITS:

• Fully insulated Roast-N-Hold gentle convection oven
designed for flavorful results by slow roasting.

• Slow convected air system promotes natural browning for
flavor and seals in natural juices. Slow roasting means 15%
to 20% less shrinkage.

• Full 8200 Watts of power allows for rethermalizing of

prepared meals or bulk items. Maximum temperature 350˚F.
(176.5˚C.).

• Standard solid state electronic control with large, clean,
easy-to-read and operate LED digital display to ensure
holding at precise food temperatures.

• Roast and hold over 300 lbs. (136 kg.) of meat in just 7 sq.
ft. of floor space.

• Non-venting oven, permitted by most local codes, provides
easy, inexpensive installation.

• Stainless steel construction throughout for ease of cleaning.

• Smooth interior coved corners prevent food particle/grease
buildup.

• Field reversible insulated Dutch doors prevent temperature
loss. Silicone door gaskets for proper seal. High
temperature ceramic magnetic latches for “easy open” and
security during transport.

• Safety conscious anti-microbial latches protect against
spreading germs. Standard with right hand hinging; left hand
hinging available upon request.

• Channel pan slides securely hold 18" x 26" pans on 3"
centers without tipping. Provides added strength. Supplied
with six raised wire grids.

• Heavy duty 5" swivel casters, two with brakes. Provides
mobility when fully loaded.

Deluxe Models (-DX) have 18 factory or eld programmed cook

& hold cycles. Each programmed menu can be customized for

exact time and temperature needs. Probe cooking includes one

6" meat temperature probe and port.

POWER UNIT OPTIONS:

8200 Watts, 208 Volts, 1 Phase, 60 Hz.
8200 Watts, 240 Volts, 1 Phase, 60 Hz.
8200 Watts, 208 Volts, 3 Phase, 60 Hz.
8200 Watts, 240 Volts, 3 Phase, 60 Hz.

™

®

C US

CO-151-F-1818DE

Standard (-DE) Deluxe (-DX)

All Ovens come standard with

easy-to-read and operate

LED digital controls.

ACCESSORIES and OPTIONS
(Available at extra cost):

q Deluxe version with 18 programmable menus

and 6" meat probe (or optional 3" food probe).

q Security Panel for Controls

q Tempered Glass Door Windows

q Key Lock Latches

q Extra Wire Grids

q Perimeter and Corner Bumpers

q Rear Push Handle

q 6" Dia. Casters

q Polyurethane Casters

q HACCP Documentation (built in USB port)

See page E-10 for accessory details.

Deluxe Controls are available
with 18 programmable menus

and 6" meat probe.

5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: [phone]
www.crescor.com

Page E-2

Jan., 2015

5/8"

4"

"A"

CO-151-F-1818D Series

G

3"

"B"

1-1/2"

DETAIL OF
PAN SLIDE

CRES COR

MODEL NO.

CO-151-F-1818DE
CO-151-F-1818DX

When ordering bumpers, add 2" to overall dimensions.

CABINET:

• Body: 22 ga. stainless steel.

• Reinforcement: Internal framework of 16 ga. stainless steel.

• Insulation: Fiberglass, thermal conductivity (K factor) is .23 at

75˚F. 1-1/2" in back wall, doors, base; 2" in side walls.

• Air tunnels: 20 ga. stainless steel, lift-out type, mounted on sides.

• Interior coved corners.

BASE:

• One piece construction, .125 aluminum.

• Casters: 5" dia., swivel, modulus tires, 1-1/4 wide, load cap.

250 lbs. each, temp. range -45˚/+180˚F. Delrin bearings. Front

casters equipped with brakes.

DUTCH DOORS:

• Field reversible.

• Formed 22 ga. stainless steel.

• Latches: Chrome plated zinc with composite handle, ceramic
magnetic type.

• Hinges: Heavy duty chrome plated zinc.

• Gaskets: Perimeter type, silicone.

• Pan stops: Embossed.

PAN SLIDES:

• 18 ga. stainless steel channels riveted on 3" centers.

• Grids (6): Nickel chrome plated steel, raised wire 17" x 25".

POWER REQUIREMENTS AVAILABLE:

• 8200 Watts, 208 Volts, 60 Hz., 1 phase, 39 Amps., 50 Amp. service.

• 8200 Watts, 240 Volts, 60 Hz., 1 phase, 34 Amps., 50 Amp. service.

• 8200 Watts, 208 Volts, 60 Hz., 3 phase, 23 Amps., 30 Amp. service.

• 8200 Watts, 240 Volts, 60 Hz., 3 phase, 20 Amps., 30 Amp. service

PAN DIM "A" DIM "B" DIM "C" INSIDE DIMENSIONS

CAP

18

SIZE WIDTH DEPTH HEIGHT WIDTH DEPTH HEIGHT

18 X 26 IN 25-3/8 37-3/4 73-1/2 18-1/4 26-1/2 58 LBS 415

460 X 660 MM 645 960 1870 465 675 1475 KG 188

6-50P

"C"

70"

X

G

Y

Z

L15-30P

WEIGHT

ACT.

ELECTRICAL COMPONENTS:

• Thermostat (roast/hold): Solid state digital control, 140°F to

350˚F (176.5˚C).

• Switch: ON-OFF push button type.

• Thermometer: Digital.

• Power cord: Permanent, 8 ft.;

- Right Angle Plug for 50 Amp.;

- Twistlock Straight Plug for 30 Amp.

• Heaters (6): 1325 Watts each.

• Blower motors (4).

• Vent fans (3).

• Fuses (2): 6 Amp.

INSTALLATION REQUIREMENTS:

• This model complies with section 59 of UL710B for emissions
of grease laden air, and according to UL is not required to be
placed under a ventilation hood. Check local requirements
before installation.

SHORT FORM SPECIFICATIONS

Cres Cor Roast-N-Hold Convection Oven Model
CO-151-F-1818D_. 18 ga. stainless steel, recessed control
panel with digital thermostat. Cabinet and Dutch doors 22
ga. stainless steel; stainless steel internal frame; coved
corner interior. Fiberglass insulation in sides 2”; back,
doors and base 1-1/2”. High temperature anti-microbial
magnetic latches. No-tip channel interior for 18" x 26" pans
on 3" centers. One piece base .125 aluminum. 5" swivel
modulus casters, Delrin bearings. Load capacity 250 lbs.
each. 8200 Watts, ______ Volts, 60 Hz., ______ Phase.
2-Year Parts / 1-Year Labor warranty. Provide the following
accessories: _____ _____ _____. CSA-US, CSA-C, CSA
to NSF4 listed.

In line with its policy to continually improve its products,

5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: [phone]
www.crescor.com

© Crescent Metal Products, Inc. 2015 All rights reserved. Litho in U.S.A.

CRES COR reserves the right to change materials and

specications without notice.