EXTRUDED SIDEWALL
PAN DRYING RACK
MODEL 252-DR-36
FEATURES AND BENEFITS:
• Durable pan drying rack for drying and
transport of (36) 18" x 26" pans.
• Fully welded framework of structural aluminum
extrusions for rigidity and durability.
• Constructed of non-corrosive, Hi-Tensile
aluminum for strength.
JOB:
ITEM NO:
• Easy to clean; interlocking, extruded sidewalls
hold pans on 1-1/2" centers. Provides added
strength.
• Offers complete flexibility for operator’s
selection of pan spacing.
• Supplied with three raised wire grids.
• Heavy duty 5" swivel casters, two with brakes.
Provides mobility when fully loaded.
Note: Designed to hold standard 18 x 26"
pans by the lip. Due to the variability
of pan manufacturers/quality of pans
being held/pan sizes, please contact
manufacturer or provide a sample pan
to ensure a proper fit.
252-DR-36
¨ N
ACCESSORIES and OPTIONS
(Available at extra cost):
q Pan Stop
q Corner Bumpers
q Vertical Bumpers
q Perimeter Bumper
q Rotary Bumpers (for use with 5" casters)
q Floor Lock (for use with 5" casters)
q Various Caster Options
5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: 440/350-7267
www.crescor.com
See page G-36 for accessory details.
Page G-7.1
Jan., 2017
20.250
Scan QR code to view Spec Sheet,
Operating Manual, Wiring Diagram or
to call Cres Cor
®
Customer Service.
If you need a QR reader, visit your
App Store on your Smartphone or
Tablet.
Model
252-DR-36
252-DR-36
26.624
19.500
(14) PAN SLIDES
(13) SP. @ 1.500" =
A
19.500
(14 PANS SLIDES)
(13) SP. @ 1.500" =
19.500
(14 PAN SLIDES)
(13) SP. @ 1.500" =
CRES COR
MODEL NO.
252-DR-36
CAP SIZE WIDTH DEPTH HEIGHT WIDTH DEPTH HEIGHT
36
When ordering bumpers, add 2" to overall dimensions.
ALL ALUMINUM CONSTRUCTION IS RIVETED, WELDED AND FINISHED.
22.399
75.688
24.312
PAN DIM "A" DIM "B" DIM "C" INSIDE DIMENSIONS
18 X 26 IN 21-5/16 26-5/8 75-11/16 18-1/8 26 67-1/2 LBS 70
460 X 660 MM 560 680 1922 460 660 1715 KG 32
18-1/8" I.D.
17-3/16"
17-5/8"
FALL THRU
WEIGHT
ACT.
RACK:
• Posts: Extruded channels, 1 x 2 x .125.
• Top and bottom: Extruded channels, 1-1/16 x 2-3/8 x .188;
welded to posts.
• Tie rods (4): Two front and back; 5/16 dia. steel rods enclosed in
aluminum tubing, fastened to posts.
• Sides: Interlocking extruded 6" panels, smooth outer sides;
riveted to posts.
• Casters: 5" dia., swivel, modulus tires, 1-1/4 wide, load cap. 250
lbs., temp. range: -45°\+180°F. Delrin bearings.
• Two casters equipped with brakes.
PAN SLIDES:
• Eleven 6" extruded interlocking side wall panels act as pan
slides on 1-1/2" centers.
• Holds (36) 18" x 26" bun pans vertically.
• Grids (3): Nickel chrome plated steel, raised wire 17" x 25".
Scan QR code to view Spec Sheet,
Operating Manual, Wiring Diagram
or to call Customer Service.
If you need a QR reader visit your App
Store on your Smartphone or Tablet.
Note: Designed to hold standard 18 x 26" pans by the lip. Due to
the variability of pan manufacturers/quality of pans being
held/pan sizes, please contact manufacturer or provide a
sample pan to ensure a proper fit.
SHORT FORM SPECIFICATIONS
Cres Cor Pan Drying Rack Model 252-DR-36. Extruded
aluminum welded construction. Tie rods (2) applied at
front and rear. Interlocking extruded sides for drying
(36) 18" x 26" pans. 5" swivel modulus casters, Delrin
bearings. Load capacity 250 lbs. each, temperature -45°
to +180°F. 2-Year Parts / 1-Year Labor warranty. Provide
the following accessories: _____ _____ _____.
NSF listed.
5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: 440/350-7267
www.crescor.com
© Crescent Metal Products, Inc. 2017 All rights reserved. Made in America Since 1936
In line with its policy to continually improve its products,
CRES COR reserves the right to change materials and
specications without notice.
Loading...