Cres Cor 208-1835-D User Manual
CORRUGATED SIDEWALL
ROLL-IN REFRIGERATOR RACKS
208 SERIES
(FOR 18" X 26" PANS)
FEATURES AND BENEFITS:
• Durable rack specically designed to t roll-in or
pass through refrigerators, freezers, and warming
cabinets; eliminates unnecessary product
handling while maintaining proper temperature
levels. Holds 18" x 26" pans.
• Fully welded framework of structural aluminum
extrusions for rigidity and durability.
JOB:
ITEM NO:
• Constructed of non-corrosive, Hi-Tensil aluminum
for strength.
• Corrugated sidewalls securely hold 18" x 26" pans
on 1-1/2" centers without tipping. Provides added
strength.
• Inboard heavy duty 5" swivel casters, two with
brakes. Wheel placement permits easy “in-and-out”
of roll-ins.
• Two styles available; Custom (C) or Deluxe (D).
Deluxe includes perimeter bumper and enclosed
base.
208-1835C
¨ N
ACCESSORIES and OPTIONS
(Available at extra cost):
o Pan Stop
o Corner Bumpers
o Vertical Bumpers
o Various Caster Options
See page G-36 for accessory details.
5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: 440/350-7267
www.crescor.com
Gold indicates our Best Rack with the
best warranty in the industry.
3-Year Parts / 1-Year Labor with lifetime
guarantee against rust & corrosion
Page G-12
Jan., 2011
208 Roll-In Series (18" x 26" pans)
DETAIL OF
PAN SLIDE
BAA
3-7/8 SWIVEL
RADIUS
1-1/2
9/16
B
C
INBOARD CASTER PLACEMENT
CUSTOM ("C")
CRES COR
MODEL NO.
CAP SIZE WIDTH DEPTH HEIGHT WIDTH DEPTH HEIGHT
208-1835-C 35
PAN DIM "A" DIM "B" DIM "C" INSIDE DIMENSIONS
18 x 26 IN 20-11/16 25-1/8 64-1/2 18-1/8 24-3/8 55-15/16 LBS 65
460 x 660 MM 525 640 1640 460 620 1425 KG 29
DELUXE ("D")
CRES COR
MODEL NO.
CAP SIZE WIDTH DEPTH HEIGHT WIDTH DEPTH HEIGHT
208-1835-D 35
Note: Send sample pan or tray with order when using any that are not 18" x 26" pans with heavy beaded edges.
PAN DIM "A" DIM "B" DIM "C" INSIDE DIMENSIONS
18 x 26 IN 22-9/16 27 64-1/2 18-1/8 24-3/8 55-15/16 LBS 70
460 x 660 MM 575 690 1640 460 620 1425 KG 32
WEIGHT
ACT.
WEIGHT
ACT.
ALL ALUMINUM CONSTRUCTION IS RIVETED, WELDED AND FINISHED.
RACK:
• Posts: Extruded channels, 1-1/16 x 2 x .125.
• Top and bottom: Extruded channels, 1-1/16 x 2-3/8 x .188;
welded to posts.
• Tie rods (2): 5/16 dia. steel rods enclosed in aluminum tubing;
fastened to posts.
• Sides: .063 aluminum corrugations riveted to posts.
• Bolsters: Formed .190 aluminum; welded to posts, casters
attached.
• Casters: 5" dia., swivel, modulus tires, 1-1/4 wide, load cap. 250
lbs. each, temp. range -45˚/+180˚F. Delrin bearings. Two casters
equipped with brakes.
Cres Cor Roll-In Refrigerator Rack Model 208-1835- (C)
or (D). Extruded aluminum welded construction. Tie rods
(2) applied at front and rear. No-tip corrugated sides for
(35) 18" x 26" pans on 1-1/2" centers. Inboard 5" swivel
modulus casters, Delrin bearings. Load capacity 250 lbs.
DELUXE (“D”) MODELS:
• Base plate: One piece .063 aluminum.
• Bumper: 1" wide gray rubber, perimeter type.
each, temperature -45˚ to +180˚F.
q Custom Model (C)
q Deluxe Model (D) has .063 aluminum base plate;
PAN SLIDES:
• Corrugations act as pan slides on 1-1/2" centers.
3-Year Parts / 1-Year Labor warranty. Lifetime guarantee
against rust & corrosion. Provide the following accessories:
_____ _____ _____. NSF listed.
Gold indicates our Best Rack with the
best warranty in the industry.
3-Year Parts / 1-Year Labor with lifetime
guarantee against rust & corrosion
SHORT FORM SPECIFICATIONS
perimeter bumper.
In line with its policy to continually improve its products,
5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: 440/350-7267
www.crescor.com
© Crescent Metal Products, Inc. 2011 All rights reserved. Litho in U.S.A.
CRES COR reserves the right to change materials and
specications without notice.
Loading...