Cres Cor 207-UA-12-Z User Manual

CORRECTIONAL UNIVERSAL ANGLE

ROLL-IN REFRIGERATOR RACK

MODEL 207-UA-12-Z

FEATURES AND BENEFITS:

• Durable heavy duty rack specically designed
for the Correctional Market. Fits roll-in or pass
through refrigerators, freezers, and warming
cabinets; eliminates unnecessary product
handling. Holds a variety of pan sizes.

• Fully welded framework of structural aluminum
extrusions for rigidity and durability.

JOB:

ITEM NO:

• Constructed of non-corrosive, Hi-Tensile
aluminum for strength.

• Twelve sets of non-removable extruded universal
angles are welded and riveted to posts on 4-1/2"
centers.

• Inboard heavy duty 5" swivel casters, two with
brakes. Wheel placement permits easy “in-and-out”
of roll-ins.

• Other heavy duty roll-in rack models available.

207-UA-12-Z

¨ N

ACCESSORIES and OPTIONS
(Available at extra cost):

o Pan Stop

o Corner Bumpers

o Vertical Bumpers

o Perimeter Bumpers

o Various Caster Options

5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: [phone]
www.crescor.com

Page CM-G-15

Oct., 2014

207-UA-12-Z

6-3/16

B

A BA

3-7/8 SWIVEL
RADIUS

4-1/2

C

INBOARD CASTER PLACEMENT

DETAIL OF

PAN SLIDES

CRES COR

MODEL NO.

ANGLES

207-UA-12-Z

NOTES: 1. Pan sizes 22" x 20" (560 x 510) Roast & Bake Pans, 10" x 20" (255 x 510) Roast & Bake Pans, 18" x 26" (460 x 660)

Bun Pans, 14" x 18" (355 x 460) Service Trays, 12" x 20" (305 x 510) Steam Table Pans.

2. When ordering bumpers, add 2" to overall dimensions.

PAN DIM "A" DIM "B" DIM "C" INSIDE DIMENSIONS

CAP/

12

SETS

SIZE WIDTH DEPTH HEIGHT WIDTH DEPTH HEIGHT

SEE NOTE

BELOW

IN 24-1/2 24-15/16 64-1/2 21-3/4 24-3/8 55-15/16 LBS 100

MM 625 635 1640 555 620 1425 KG 45

WEIGHT

ACT.

ALL CONSTRUCTION IS RIVETED, WELDED AND FINISHED.

RACK:

• Posts: Extruded aluminum channels, 1-1/16 x 2 x .125.

• Top bars: Extruded channels 1-1/16 x 2-3/8 x .188;

welded to posts.

• Tie bars: (2): Extruded channels, 1/2 x 1-1/2 x .125;
welded to posts.

BASE:

• One piece construction, .190 aluminum; welded to posts.

• Casters: 5" dia. swivel, modulus tires, 1-1/4" wide, load cap. 250

lbs. each, temp. range -45/+180°F. Delrin bearings. Two casters
equipped with brakes.

PAN SLIDES:

• Extruded angles, 2 x 6-3/16 x .100, riveted and welded on
4-1/2" centers.

SHORT FORM SPECIFICATIONS

Cres Cor Correctional Roll-In Refrigerator Rack Model
207-UA-12-Z. Extruded aluminum welded construction. Tie
rods (2) applied at front and rear. Twelve (12) sets non­removable extruded universal angles for multiple pan sizes,
spacing every 4-1/2". Inboard 5" swivel modulus casters,
Delrin bearings. Load capacity 250 lbs. each, temperature

-45˚ to +180˚F. 2 year parts warranty. Provide the following
accessories: . NSF listed.

In line with its policy to continually improve its products,

5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: [phone]
www.crescor.com

© Crescent Metal Products, Inc. 2014 All rights reserved. Litho in U.S.A.

CRES COR reserves the right to change materials and

specications without notice.