Cres Cor 207-UA-12-AC User Manual

Page 1
UNIVERSAL ANGLE
ROLL-IN REFRIGERATOR RACKS
207-UA SERIES
FEATURES AND BENEFITS:
• Durable rack specically designed to t roll-in or pass through refrigerators, freezers, and warming cabinets; eliminates unnecessary product handling while maintaining proper temperature levels. Holds a variety of pan sizes.
• Fully welded framework of structural aluminum extrusions for rigidity and durability.
JOB:
ITEM NO:
• Constructed of non-corrosive, Hi-Tensile aluminum for strength.
• Chrome plated wire universal angles adjustable on 1-1/2" centers. Extruded aluminum bottom angle permanently welded in place.
• Inboard heavy duty 5" swivel casters, two with brakes. Wheel placement permits easy “in-and-out” of roll-ins.
• Two styles available; Custom (C) or Deluxe (D). Deluxe includes perimeter bumper and enclosed base.
207-UA-12-AC
¨ N
ACCESSORIES and OPTIONS (Available at extra cost):
o Extra Universal Angles
o Pan Stop
o Corner Bumpers
o Vertical Bumpers
o Various Caster Options
See page G-36 for accessory details.
5925 Heisley Road • Mentor, OH 44060-1833 Phone: 877/CRESCOR • Fax: 440/350-7267
www.crescor.com
Gold indicates our Best Rack with the best warranty in the industry. 3-Year Parts / 1-Year Labor with lifetime guarantee against rust & corrosion
Page G-15
Jan., 2011
Page 2
207-UA Roll-In Series
5-1/8
4-1/2
DETAIL OF
PAN SLIDES
B
A BA
3-7/8 SWIVEL RADIUS
C
INBOARD CASTER PLACEMENT
CUSTOM ("C")
CRES COR
MODEL NO.
207-UA-12-AC
ANGLES
PAN DIM "A" DIM "B" DIM "C" INSIDE DIMENSIONS
CAP/
12
SETS
SIZE WIDTH DEPTH HEIGHT WIDTH DEPTH HEIGHT
SEE NOTE
BELOW
IN 24-1/2 24-15/16 64-1/2 21-3/4 24-1/2 55-15/16 LBS 68
MM 625 635 1640 555 625 1425 KG 31
WEIGHT
DELUXE ("D")
CRES COR
MODEL NO.
ANGLES
207-UA-12-AD
NOTES: 1. Pan sizes 22" x 20" (560 x 510) Roast & Bake Pans, 10" x 20" (255 x 510) Roast & Bake Pans, 18" x 26" (460 x 660)
Bun Pans, 14" x 18" (355 x 460) Service Trays, 12" x 20" (305 x 510) Steam Table Pans. Refer to Pan Size Chart at end of section.
2. When ordering bumpers, add 2" to overall dimensions.
ALL CONSTRUCTION IS RIVETED, WELDED AND FINISHED.
RACK:
• Posts: Extruded aluminum channels, 1-1/16 x 2 x .125.
• Top and bottom: Extruded aluminum channels, 1-1/16 x 2-3/8 x .188; welded to posts.
• Tie rods (2): 5/16 dia. steel rods enclosed in aluminum tubing; fastened to posts.
• Bolsters: Formed .125 aluminum; welded to posts, casters attached.
• Casters: 5" dia., swivel, modulus tires, 1-1/4 wide, load cap. 250 lbs. each, temp. range -45˚/+180˚F. Delrin bearings. Two casters equipped with brakes.
DELUXE (“D”) MODELS:
• Base plate: One piece .063 aluminum.
• Bumper: 1" wide gray rubber, perimeter type.
PAN SLIDES:
• Wire angles (.306 dia.), nickel chrome plated steel, spaced on 4-1/2" centers, adjustable on 1-1/2" centers.
• Bottom extruded angle, welded to posts.
PAN DIM "A" DIM "B" DIM "C" INSIDE DIMENSIONS
CAP/
12
SETS
SIZE WIDTH DEPTH HEIGHT WIDTH DEPTH HEIGHT
SEE NOTE
BELOW
IN 26-3/8 26-13/16 64-1/2 21-3/4 24-1/2 55-15/16 LBS 73
MM 670 685 1640 555 625 1425 KG 33
SHORT FORM SPECIFICATIONS
Cres Cor Roll-In Refrigerator Rack Model 207-UA-12-A (C) or (D). Extruded aluminum welded construction. Tie rods (2) applied at front and rear. (12) sets wire universal angles for multiple pan sizes, adjustable spacing every 1-1/2". Formed .125 bolsters. Inboard 5" swivel modulus casters, Delrin bearings. Load capacity 250 lbs. each, temperature
-45˚ to +180˚F.
q Custom Model (C) q Deluxe Model (D) has .063 aluminum base plate;
perimeter bumper.
3-Year Parts / 1-Year Labor warranty. Lifetime guarantee against rust & corrosion. Provide the following accessories: _____ _____ _____. NSF listed.
WEIGHT
Gold indicates our Best Rack with the best warranty in the industry. 3-Year Parts / 1-Year Labor with lifetime guarantee against rust & corrosion
ACT.
ACT.
In line with its policy to continually improve its products,
5925 Heisley Road • Mentor, OH 44060-1833 Phone: 877/CRESCOR • Fax: 440/350-7267
www.crescor.com
© Crescent Metal Products, Inc. 2011 All rights reserved. Litho in U.S.A.
CRES COR reserves the right to change materials and
specications without notice.
Loading...