Cres Cor 121-PH-UA-11D User Manual

NON-INSULATED

PROOF/HOT CABINET

MODEL 121-PH-UA-11D

FEATURES AND BENEFITS:

• Non-Insulated versatile proof/hot cabinet. Use as
a proofer to produce quantities of uniformly raised
dough or as a holding cabinet to keep prepared
foods at serving temperatures.

• Powerful, yet efficient, heating system maintains
the right combination of heat and humidity to
properly proof or hold products.

• 2000 Watt cabinet holds foods at up to 180˚F.

(82˚C.); proofing with 960 Watts allows for
temperatures of 80˚F (26.5˚C) to 95˚F (35˚C),
with relative humidity of 95%.

JOB:

ITEM NO:

• Body constructed of non-corrosive, Hi-Tensile
aluminum for strength and ease of mobility.

• Field reversible Lexan door allows for viewing
products. Perimeter door gasket minimizes heat

loss. Standard with right hand hinging; left hand

hinging available upon request.

• Magnetic latch secures door during transport.

• Eleven sets of chrome plated wire universal
angles accommodate a large variety of pan sizes
on adjustable 1-1/2” centers.

• Controls accessible without opening door; allows
adjustment without interrupting process.

• Slanted control panel has easy-to-read

thermometer; entire power assembly removable

for cleaning and maintenance.

• Integral drip trough on front keeps traffic area dry,
safer.

• Heavy duty 5" swivel casters, two with brakes.
Provides mobility when fully loaded.

121-PH-UA-11D

®

SANITATION

NSF/ANSI 4

ACCESSORIES and OPTIONS
(Available at extra cost):

q Dutch Doors

q Extra Universal Angles

q Corner Bumpers

q Side and Rear Bumper

q Various Caster Options

q Digital Thermometer

q Push Handle

q Bail Handles

q Lock Hasp

q 208 or 240 Volt Service

See page D-4 for accessory details.

C US

®

5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: [phone]

www.crescor.com

Page D-2

Nov., 2013

A

A B

121-PH-UA-11D

6-3/16

12-15/16

B

4-1/2

C

9-1/2

DETAIL OF

PAN SLIDE

CRES COR

MODEL NO.

121-PH-UA-11D

NOTES: 1. Pan sizes 22" x 20" (560 x 510) Roast & Bake Pans, 10" x 20" (255 x 510) Roast & Bake Pans, 18" x 26" (460 x 660)

2. When ordering bumpers, add 2" to overall dimensions.

ALL ALUMINUM CONSTRUCTION IS RIVETED, WELDED AND FINISHED.

CAP/ANGLES

Bun Pans, 14" x 18" (355 x 460) Service Trays, 12" x 20" (305 x 510) Steam Table Pans.

Refer to Pan Size Chart at end of section.

PAN DIM "A" DIM "B" DIM "C" INSIDE DIMENSIONS

SIZE WIDTH DEPTH HEIGHT WIDTH DEPTH HEIGHT

11

SETS

SEE NOTE

BELOW

IN 24-1/4 32 69-3/4 21-1/4 28-1/4 54-3/8 LBS 160

MM 620 815 1775 540 718 1385 KG 73

W

5-20P

WEIGHT

G

ACT.

CABINET:

• Top: One piece .063 aluminum; riveted to sides and back.

• Side panels: Formed .063 aluminum; fastened to base and top.

• Back panel: .063 aluminum; fastened to base and top.

• Air tunnel: .063 aluminum; lift-out type, mounted on back panel.

BASE:

• One piece construction, .125 aluminum.

• Drip trough: Formed 18 ga. 304 stainless steel mounted to front

of base; removable drip pan.

• Casters: 5" dia., swivel, modulus tires, 1-1/4 wide, load cap.
250 lbs. each, temp. range -45˚/+180˚F. Delrin bearings. Front

casters equipped with brakes.

DOOR:

• Field reversible.

• Frame: Black powder coated extruded aluminum, 13/16 x

1-11/16; fastened together.

• Panel: 3/16 clear Lexan, fitted into door frame.

• Latch: Magnetic type with pull handle.

• Hinges (2): Chrome plated steel.

• Gasket: Perimeter type, Santoprene rubber.

PAN SLIDES:

• Wire angles (.306 dia.) nickel chrome plated steel; mounted on
lift-out posts.

• Spaced on 4-1/2” centers; adjustable on 1-1/2” centers.

PROOF/HOT UNIT COMPONENTS:

• Removable bottom mount proof/hot unit.

• Body: Formed .063 aluminum with black control panel.

• Thermostat (holding): Mechanical, room ambient to 180˚F. (82˚C.).

• Thermostat (humidity): Mechanical, room ambient to 95%.

• Pilot lights.

PROOF/HOT UNIT COMPONENTS (CONT.):

• Switches (2): Rocker type.

• Power cord: Permanent, 6 ft., 12/3 ga. with molded plug.

• Heaters (2): 960 Watts for holding.

• Blower motor.

• Thermometer.

• Water pan: 3-1/2 quart; 22 ga. 304 stainless steel with 960

Watt heater for humidity.

POWER REQUIREMENTS:

• 2000 Watts, 120 Volts, 60 Hz., single phase, 16.7 Amps.,

20 Amp. service.

SHORT FORM SPECIFICATIONS

Cres Cor Proof/Hot Cabinet Model 121-PH-UA-11D.

Formed and welded .063 aluminum top, .125

aluminum base. 11 sets wire universal angles for
multiple pan sizes, adjustable spacing every 1-1/2”.

Field reversible Lexan door with magnetic pull latch.

Removable 2000 Watt, 120 Volt power unit. Controls

accessible without opening door. 5" swivel modulus
casters, Delrin bearings. Load capacity 250 lbs. each.
1-Year Parts / 90-Day Labor warranty. Provide the

following accessories: . CSA-US,

CSA-C, CSA to NSF4 listed.

In line with its policy to continually improve its products,

5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: [phone]

www.crescor.com

© Crescent Metal Products, Inc. 2011 All rights reserved. Litho in U.S.A.

CRES COR reserves the right to change materials and

specications without notice.