
INSULATED STAINLESS STEEL
RADIANT HOT CABINET
MODEL 1200-HH-SS-2DX
FEATURES AND BENEFITS:
• Heated cabinet has two separate
compartments and controls for exibility in hot
holding needs.
• Fully insulated cabinets keep prepared foods at
serving temperatures.
• Powerful, yet efcient, 1800 Watt heating
system maintains the right temperature to
properly hold products. Heats up to 200°F.
(93°C.).
• Standard solid state electronic controls with
large, clear, easy-to-read and operate LED
digital display to ensure holding at precise food
temperature.
• Internal frame in body and doors maintains
structural rigidity.
SANITATION
NSF/ANSI 4
JOB:
ITEM NO:
®
1200-HH-SS-2DX
• Safety-conscious anti-microbial latches protect
against spreading germs.
• Stainless steel construction throughout for ease
of cleaning.
• Insulated eld reversible doors for exibility.
Standard with right hand hinging; left hand
hinging available upon request.
• Magnetic latches for “easy open”; twist-lock
catch secures doors during transport. Latches
and hinges mounted inboard.
• Sixteen sets of chrome plated wire universal
angles to accommodate a large variety of pan
sizes on adjustable 1-1/2" centers.
• Heavy duty 5" swivel casters, two with brakes,
that provide mobility when fully loaded.
Standard solid state electronic control with large,
clear, easy-to-read and operate LED digital display
to ensure holding at precise food temperature
ACCESSORIES and OPTIONS
(Available at extra cost):
q Key Lock Handles
q Corner Bumpers
q Perimeter Bumper
q Door Window
q Various Caster Options
q 240 Volt Service
See page B-30 for accessory details.
5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: 440/350-7267
www.crescor.com
Page B-11.2
Jan., 2017

1200-HH-SS-2DX
Scan QR code to view Spec Sheet,
Operating Manual, Wiring Diagram or
to call Cres Cor
®
Customer Service.
If you need a QR reader, visit your
App Store on your Smartphone or
Tablet.
Model
1200-HH-SS-2DX
8400-105
5-1/8”
"A"
3”
"B"
DETAIL OF
PAN SLIDE
CRES COR
MODEL NO.
1200-HH-SS-2DX
When ordering bumpers, add 2" to overall dimensions.
PAN DIM "A" DIM "B" DIM "C" INSIDE DIMENSIONS
CAP SIZE WIDTH DEPTH HEIGHT WIDTH DEPTH HEIGHT
16
18 x 26 IN 26-5/8 32-3/4 76-1/2 19-7/8 27 28-3/4 LBS 299
460 x 660 MM 676 835 1943 505 690 730 KG 136
12 x 20 IN
32
305 x 510 MM
13-1/4"
"A"
"C"
71”
G
W
5-15 P
"B"
WEIGHT
ACT.
CABINETS:
• Bodies: 22 ga. outer and 18 ga. inner stainless steel
compartments.
• Reinforcements: Internal framework of channels, 1 x 3/4 x .125.
• Insulation: Fiberglass, thermal conductivity (K factor) is .23 BTU/
ft HR °F (.04 w/mK) at 75°F. 1-1/2” in top, bottom and walls, 1”
in doors.
BASE:
• One piece construction, .060 stainless steel.
• Casters: 5” dia. swivel, modulus tires, 1-1/4” wide, load cap.
HOT UNIT COMPONENTS:
• Thermostats: Solid state digital display control, room ambient to
200˚F (93˚C).
• Switches: ON-OFF push button type.
• Power cord: Permanent, 6 ft., 12/3 ga. with right angle plug.
• Heaters(6): 300 Watts each.
• Vent fans.
POWER REQUIREMENTS:
• 1800 Watts, 120 Volts, 60 Hz., single phase, 15 Amps.,
20 Amp. service.
250 lbs. each, temp. range -45°/+180°F, Delrin bearings. Front
casters equipped with brakes.
DOORS:
• Field reversible.
• Formed 22 ga. stainless steel.
• Latches: Chrome plated zinc with composite handle, magnetic
type; mounted inboard.
• Transport knob.
• Hinges: Heavy duty chrome plated zinc; mounted inboard.
• Gaskets: Perimeter type, silicone.
• Vents: Adjustable.
PAN SLIDES:
• Wire angles (.306 dia.), nickel chrome plated steel, mounted on
lift-off posts.
• Adjustable on 1-1/2" centers.
Scan QR code to view Spec Sheet,
Operating Manual, Wiring Diagram
or to call Customer Service.
If you need a QR reader visit your App
Store on your Smartphone or Tablet.
5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: 440/350-7267
www.crescor.com
© Crescent Metal Products, Inc. 2017 All rights reserved. Made in America Since 1936
Cres Cor Insulated Hot Stainless Steel Cabinet Model
1200-HH-SS-2DX. Outer liner of 22 ga., stainless steel,
inner liner of 18 ga. stainless steel, reinforced with
channel frame. Fiberglass insulation in walls 1-1/2”; door,
top and bottom 1”. Welded and nished. (6) 300 Watt
inner wall heaters, 120 volts. (16) sets of wire universal
angles for (16) 18” x 26” pans or (32) 12” x 20” pans;
adjustable on 1-1/2" centers. 5” swivel modulus casters,
Delrin bearings. Load capacity 250 lbs. each. 2-Year
Parts / 1-Year Labor warranty. Provide the following
accessories: ____ _____ _____ CSA-US, CSA-C, CSA
to NSF4 listed.
In line with its policy to continually improve its products,
CRES COR reserves the right to change materials and
specications without notice.
SHORT FORM SPECIFICATIONS