Cres Cor 1200-HH-SS-2DE User Manual

INSULATED STAINLESS STEEL

C US

®

RADIANT HOT CABINET

MODEL 1200-HH-SS-2DE

FEATURES AND BENEFITS:

• Heated cabinet has two separate

compartments and controls for exibility in hot

holding needs.

• Fully insulated cabinets keep prepared foods at

serving temperatures.

• Powerful, yet efcient, 1800 Watt heating

system maintains the right temperature to
properly hold products. Heats up to 200°F.
(93°C.).

• Easy-to-operate solid state electronic controls
with LED digital display to ensure holding at

precise food temperature.

• Internal frame in body and doors maintains

structural rigidity.

• Safety-conscious anti-microbial latches protect
against spreading germs.

SANITATION

NSF/ANSI 4

JOB:

ITEM NO:

®

1200-HH-SS-2DE

• Stainless steel construction throughout for ease
of cleaning.

• Insulated eld reversible doors for exibility.
Standard with right hand hinging; left hand
hinging available upon request.

• Magnetic latches for “easy open”; twist-lock
catch secures doors during transport. Latches
and hinges mounted inboard.

• Sixteen sets of chrome plated wire universal

angles accommodate a large variety of pan
sizes on adjustable 1-1/2" centers.

• Heavy duty 5" swivel casters, two with brakes,
that provide mobility when fully loaded.

ACCESSORIES and OPTIONS
(Available at extra cost):

q Key Lock Handles

q Corner Bumpers

q Perimeter Bumper

q Door Window

q Various Caster Options

q 240 Volt Service

See page B-20 for accessory details.

5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: [phone]

www.crescor.com

Page B-11.3

Jan., 2017

A

C

B

A

B

5-1/8”

9"

70"

W

G

5-15P

"A"

"B"

Scan QR code to view Spec Sheet,
Operating Manual, Wiring Diagram or
to call Cres Cor

®

Customer Service.

If you need a QR reader, visit your
App Store on your Smartphone or
Tablet.

Model
1200-HH-SS-2DE

8400-104

1200-HH-SS-2DE

3”

"C"

G

W

5-15 P

DETAIL OF
PAN SLIDE

CRES COR

MODEL NO.

1200-HH-SS-2DE 16

PAN DIM "A" DIM "B" DIM "C" INSIDE DIMENSIONS

CAP SIZE WIDTH DEPTH HEIGHT WIDTH DEPTH HEIGHT

18 x 26 IN 26-5/8 32-3/4 76-1/2 19-7/8 27 28-3/4 LBS 299

460 x 660 MM 676 835 1943 505 690 730 KG 136

WEIGHT

ACT.

12 x 20 IN

32

When ordering bumpers, add 2" to overall dimensions.

CABINETS:

• Bodies: 22 ga. outer and 18 ga. inner stainless steel

compartments.

• Reinforcements: Internal framework of 18 ga. stainless steel.

• Insulation: Fiberglass, thermal conductivity (K factor) is .23 BTU/

ft HR °F (.04 w/mK) at 75°F. 1-1/2” in top, bottom and walls, 1”

in doors.

BASE:

• One piece construction, .060 stainless steel.

• Casters: 5” dia. swivel, modulus tires, 1-1/4” wide, load cap.

250 lbs. each, temp. range -45°/+180°F, Delrin bearings. Front

305 x 510 MM

HOT UNIT COMPONENTS:

• Thermostats: Electronic temperature control with digital

temperature display. Display accurate to ±2˚F. Room ambient to
200˚F (93˚C).

• Switches: ON-OFF push button type.

• Power cord: Permanent, 6 ft., 12/3 ga. with right angle plug.

• Heaters(6): 300 Watts each.

• Vent fans.

POWER REQUIREMENTS:

• 1800 Watts, 120 Volts, 60 Hz., single phase, 15 Amps.,
20 Amp. service.

casters equipped with brakes.

DOORS:

• Field reversible.

• Formed 20 ga. stainless steel.

• Latches: Chrome plated zinc with composite handle, magnetic

type; mounted inboard.

• Transport knob.

• Hinges: Heavy duty chrome plated zinc; mounted inboard.

• Gaskets: Perimeter type, silicone.

• Vents: Adjustable.

PAN SLIDES:

• Wire angles (.306 dia.), nickel chrome plated steel, mounted on
lift-off posts.

• Adjustable on 1-1/2" centers.

Cres Cor Insulated Hot Stainless Steel Cabinet Model
1200-HH-SS-2DE. Outer liner of 22 ga., stainless steel,
inner liner of 18 ga. stainless steel, reinforced with
channel frame. Fiberglass insulation in walls 1-1/2”; door,

SHORT FORM SPECIFICATIONS

top and bottom 1”. Welded and nished. (6) 300 Watt

Scan QR code to view Spec Sheet,
Operating Manual, Wiring Diagram
or to call Customer Service.

If you need a QR reader visit your App
Store on your Smartphone or Tablet.

5925 Heisley Road • Mentor, OH 44060-1833
Phone: 877/CRESCOR • Fax: [phone]

www.crescor.com

© Crescent Metal Products, Inc. 2017 All rights reserved. Made in America Since 1936

inner wall heaters, 120 volts. (16) sets of wire universal
angles for (16) 18" x 26" pans or (32) 12” x 20” pans;
adjustable on 1-1/2" centers. 5” swivel modulus casters,
Delrin bearings. Load capacity 250 lbs. each. 2-Year
Parts / 1-Year Labor warranty. Provide the following
accessories: ____ _____ _____ CSA-US, CSA-C, CSA
to NSF4 listed.

In line with its policy to continually improve its products,
CRES COR reserves the right to change materials and

specications without notice.